HI,
On 01-07-16 02:47, Rob Herring wrote:
On Thu, Jun 23, 2016 at 11:33:27AM +0200, Hans de Goede wrote:
Hi,
On 23-06-16 00:25, Rob Herring wrote:
On Wed, Jun 22, 2016 at 12:59 PM, Hans de Goede <hdegoede@xxxxxxxxxx> wrote:
Some devices need a while to boot their firmware after providing clks /
de-asserting resets before they are ready to receive sdio commands.
This commits adds a post-power-on-delay-ms devicetree property to
mmc-pwrseq-simple for use with such devices.
Signed-off-by: Hans de Goede <hdegoede@xxxxxxxxxx>
---
Documentation/devicetree/bindings/mmc/mmc-pwrseq-simple.txt | 2 ++
drivers/mmc/core/pwrseq_simple.c | 9 +++++++++
2 files changed, 11 insertions(+)
diff --git a/Documentation/devicetree/bindings/mmc/mmc-pwrseq-simple.txt b/Documentation/devicetree/bindings/mmc/mmc-pwrseq-simple.txt
index ce0e767..e254368 100644
--- a/Documentation/devicetree/bindings/mmc/mmc-pwrseq-simple.txt
+++ b/Documentation/devicetree/bindings/mmc/mmc-pwrseq-simple.txt
@@ -16,6 +16,8 @@ Optional properties:
See ../clocks/clock-bindings.txt for details.
- clock-names : Must include the following entry:
"ext_clock" (External clock provided to the card).
+- post-power-on-delay-ms : Delay in ms after powering the card and
+ de-asserting the reset-gpios (if any)
Presumably you need this delay post any reset, not just after power on
mmc-pwrseq is only about doing power-on / off, not about providing
reset functionality.
Yes, but the property (e.g. the delay) is relevant for both and reset is
part of the power seq.
if you are waiting for firmware to boot. So the name is not all that
clear. How about a "reset-timing-ms" property that takes 3 values for
pre-assert time (normally 0), assertion time, post assert time. Of
course, I can still think of ways that breaks like when in this
sequence do clocks need to be turned on.
If you look at bindings/mmc/mmc-pwrseq-simple.txt out side of
the diff context it contains:
- reset-gpios : contains a list of GPIO specifiers. The reset GPIOs are asserted
at initialization and prior we start the power up procedure of the card.
They will be de-asserted right after the power has been provided to the
card.
- clocks : Must contain an entry for the entry in clock-names.
See ../clocks/clock-bindings.txt for details.
- clock-names : Must include the following entry:
"ext_clock" (External clock provided to the card).
Notice how the existing docs talk about a power-up procedure (which matches
the pwrseq name and purpose of these bindings).
I actually started with calling the property "post-reset-delay-ms", but then
I realized that what we really want is the ability to specify a time to
wait (for e.g. firmware to boot) after completing the power-up procedure
(and before starting the probe). The power-up procedure currently can
also includes enabling external clocks to the sdio device (if any) and
enabling regulators, so having a "reset-timing-ms" property does not
seem right, as that would suggest it is ok to do the wait after deasserting
reset, but before e.g. enabling external clocks. Where what we really
want is to enable all necessary resources (or iow complete the powerup
procedure) and then wait.
You're right that in some cases more complicated timings may be necessary,
but that can get really complicated like e.g.: enable regulator1, wait 10 ms,
enable regulator2, wait 15ms, enable external clock1, ...
And such complex timings fall outside of the scope of the mmc-pwrseq-simple
binding, the idea being that for complex cases we do a device specific
pwrseq binding, and then the smarts are in implementation of that specific
pwrseq driver. As you've said yourself before we do not want to turn
devicetree into a scripting language.
Exactly. The challenge is any single property is hard to push back on
that we've crossed that line. I don't want to see this expanded one
property at a time without any foresight on additional needs. If we can
add a property that is more flexible, but doesn't add to the complexity
then that would be better. So this one alone is fine, but the next one
I'll be less receptive.
Understood, so does this mean that you're happy with the patch as
originally posted, or would you still like to see some changes ?
Regards,
Hans
--
To unsubscribe from this list: send the line "unsubscribe linux-mmc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
