in our host design, rise edge latching is more stable than fall edge
latching. so that if rise edge has enough margin, no need scan fall edge.
Signed-off-by: Chaotian Jing <chaotian.jing@xxxxxxxxxxxx>
---
drivers/mmc/host/mtk-sd.c | 23 ++++++++++++++---------
1 file changed, 14 insertions(+), 9 deletions(-)
diff --git a/drivers/mmc/host/mtk-sd.c b/drivers/mmc/host/mtk-sd.c
index 91277b9..84e9afc 100644
--- a/drivers/mmc/host/mtk-sd.c
+++ b/drivers/mmc/host/mtk-sd.c
@@ -1328,7 +1328,7 @@ static int msdc_tune_response(struct mmc_host *mmc, u32 opcode)
{
struct msdc_host *host = mmc_priv(mmc);
u32 rise_delay = 0, fall_delay = 0;
- struct msdc_delay_phase final_rise_delay, final_fall_delay;
+ struct msdc_delay_phase final_rise_delay, final_fall_delay = { 0,};
u8 final_delay, final_maxlen;
int cmd_err;
int i;
@@ -1341,6 +1341,11 @@ static int msdc_tune_response(struct mmc_host *mmc, u32 opcode)
if (!cmd_err)
rise_delay |= (1 << i);
}
+ final_rise_delay = get_best_delay(host, rise_delay);
+ /* if rising edge has enough margin, then do not scan falling edge */
+ if (final_rise_delay.maxlen >= 10 ||
+ (final_rise_delay.start == 0 && final_rise_delay.maxlen >= 4))
+ goto skip_fall;
sdr_set_bits(host->base + MSDC_IOCON, MSDC_IOCON_RSPL);
for (i = 0; i < PAD_DELAY_MAX; i++) {
@@ -1350,10 +1355,9 @@ static int msdc_tune_response(struct mmc_host *mmc, u32 opcode)
if (!cmd_err)
fall_delay |= (1 << i);
}
-
- final_rise_delay = get_best_delay(host, rise_delay);
final_fall_delay = get_best_delay(host, fall_delay);
+skip_fall:
final_maxlen = max(final_rise_delay.maxlen, final_fall_delay.maxlen);
if (final_maxlen == final_rise_delay.maxlen) {
sdr_clr_bits(host->base + MSDC_IOCON, MSDC_IOCON_RSPL);
@@ -1374,7 +1378,7 @@ static int msdc_tune_data(struct mmc_host *mmc, u32 opcode)
{
struct msdc_host *host = mmc_priv(mmc);
u32 rise_delay = 0, fall_delay = 0;
- struct msdc_delay_phase final_rise_delay, final_fall_delay;
+ struct msdc_delay_phase final_rise_delay, final_fall_delay = { 0,};
u8 final_delay, final_maxlen;
int i, ret;
@@ -1387,6 +1391,11 @@ static int msdc_tune_data(struct mmc_host *mmc, u32 opcode)
if (!ret)
rise_delay |= (1 << i);
}
+ final_rise_delay = get_best_delay(host, rise_delay);
+ /* if rising edge has enough margin, then do not scan falling edge */
+ if (final_rise_delay.maxlen >= 10 ||
+ (final_rise_delay.start == 0 && final_rise_delay.maxlen >= 4))
+ goto skip_fall;
sdr_set_bits(host->base + MSDC_IOCON, MSDC_IOCON_DSPL);
sdr_set_bits(host->base + MSDC_IOCON, MSDC_IOCON_W_DSPL);
@@ -1397,14 +1406,10 @@ static int msdc_tune_data(struct mmc_host *mmc, u32 opcode)
if (!ret)
fall_delay |= (1 << i);
}
-
- final_rise_delay = get_best_delay(host, rise_delay);
final_fall_delay = get_best_delay(host, fall_delay);
+skip_fall:
final_maxlen = max(final_rise_delay.maxlen, final_fall_delay.maxlen);
- /* Rising edge is more stable, prefer to use it */
- if (final_rise_delay.maxlen >= 10)
- final_maxlen = final_rise_delay.maxlen;
if (final_maxlen == final_rise_delay.maxlen) {
sdr_clr_bits(host->base + MSDC_IOCON, MSDC_IOCON_DSPL);
sdr_clr_bits(host->base + MSDC_IOCON, MSDC_IOCON_W_DSPL);
--
1.8.1.1.dirty
--
To unsubscribe from this list: send the line "unsubscribe linux-mmc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
