From: Chuanxiao Dong <chuanxiao.dong@xxxxxxxxx>
sdhci_dumpregs is used to dump registers when error happens. Thus it should
use pr_err instead of pr_debug to show more information about the hardware.
Signed-off-by: Chuanxiao Dong <chuanxiao.dong@xxxxxxxxx>
[Fix whitespace and checkpatch warnings]
Signed-off-by: Adrian Hunter <adrian.hunter@xxxxxxxxx>
---
Changes in V2:
Fix whitespace and checkpatch warnings
Change subject 'host' -> 'sdhci'
drivers/mmc/host/sdhci.c | 92 ++++++++++++++++++++++++------------------------
1 file changed, 46 insertions(+), 46 deletions(-)
diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c
index 040af1b6b412..49800d2c69fa 100644
--- a/drivers/mmc/host/sdhci.c
+++ b/drivers/mmc/host/sdhci.c
@@ -52,58 +52,58 @@ static int sdhci_get_cd(struct mmc_host *mmc);
static void sdhci_dumpregs(struct sdhci_host *host)
{
- pr_debug(DRIVER_NAME ": =========== REGISTER DUMP (%s)===========\n",
- mmc_hostname(host->mmc));
-
- pr_debug(DRIVER_NAME ": Sys addr: 0x%08x | Version: 0x%08x\n",
- sdhci_readl(host, SDHCI_DMA_ADDRESS),
- sdhci_readw(host, SDHCI_HOST_VERSION));
- pr_debug(DRIVER_NAME ": Blk size: 0x%08x | Blk cnt: 0x%08x\n",
- sdhci_readw(host, SDHCI_BLOCK_SIZE),
- sdhci_readw(host, SDHCI_BLOCK_COUNT));
- pr_debug(DRIVER_NAME ": Argument: 0x%08x | Trn mode: 0x%08x\n",
- sdhci_readl(host, SDHCI_ARGUMENT),
- sdhci_readw(host, SDHCI_TRANSFER_MODE));
- pr_debug(DRIVER_NAME ": Present: 0x%08x | Host ctl: 0x%08x\n",
- sdhci_readl(host, SDHCI_PRESENT_STATE),
- sdhci_readb(host, SDHCI_HOST_CONTROL));
- pr_debug(DRIVER_NAME ": Power: 0x%08x | Blk gap: 0x%08x\n",
- sdhci_readb(host, SDHCI_POWER_CONTROL),
- sdhci_readb(host, SDHCI_BLOCK_GAP_CONTROL));
- pr_debug(DRIVER_NAME ": Wake-up: 0x%08x | Clock: 0x%08x\n",
- sdhci_readb(host, SDHCI_WAKE_UP_CONTROL),
- sdhci_readw(host, SDHCI_CLOCK_CONTROL));
- pr_debug(DRIVER_NAME ": Timeout: 0x%08x | Int stat: 0x%08x\n",
- sdhci_readb(host, SDHCI_TIMEOUT_CONTROL),
- sdhci_readl(host, SDHCI_INT_STATUS));
- pr_debug(DRIVER_NAME ": Int enab: 0x%08x | Sig enab: 0x%08x\n",
- sdhci_readl(host, SDHCI_INT_ENABLE),
- sdhci_readl(host, SDHCI_SIGNAL_ENABLE));
- pr_debug(DRIVER_NAME ": AC12 err: 0x%08x | Slot int: 0x%08x\n",
- sdhci_readw(host, SDHCI_ACMD12_ERR),
- sdhci_readw(host, SDHCI_SLOT_INT_STATUS));
- pr_debug(DRIVER_NAME ": Caps: 0x%08x | Caps_1: 0x%08x\n",
- sdhci_readl(host, SDHCI_CAPABILITIES),
- sdhci_readl(host, SDHCI_CAPABILITIES_1));
- pr_debug(DRIVER_NAME ": Cmd: 0x%08x | Max curr: 0x%08x\n",
- sdhci_readw(host, SDHCI_COMMAND),
- sdhci_readl(host, SDHCI_MAX_CURRENT));
- pr_debug(DRIVER_NAME ": Host ctl2: 0x%08x\n",
- sdhci_readw(host, SDHCI_HOST_CONTROL2));
+ pr_err(DRIVER_NAME ": =========== REGISTER DUMP (%s)===========\n",
+ mmc_hostname(host->mmc));
+
+ pr_err(DRIVER_NAME ": Sys addr: 0x%08x | Version: 0x%08x\n",
+ sdhci_readl(host, SDHCI_DMA_ADDRESS),
+ sdhci_readw(host, SDHCI_HOST_VERSION));
+ pr_err(DRIVER_NAME ": Blk size: 0x%08x | Blk cnt: 0x%08x\n",
+ sdhci_readw(host, SDHCI_BLOCK_SIZE),
+ sdhci_readw(host, SDHCI_BLOCK_COUNT));
+ pr_err(DRIVER_NAME ": Argument: 0x%08x | Trn mode: 0x%08x\n",
+ sdhci_readl(host, SDHCI_ARGUMENT),
+ sdhci_readw(host, SDHCI_TRANSFER_MODE));
+ pr_err(DRIVER_NAME ": Present: 0x%08x | Host ctl: 0x%08x\n",
+ sdhci_readl(host, SDHCI_PRESENT_STATE),
+ sdhci_readb(host, SDHCI_HOST_CONTROL));
+ pr_err(DRIVER_NAME ": Power: 0x%08x | Blk gap: 0x%08x\n",
+ sdhci_readb(host, SDHCI_POWER_CONTROL),
+ sdhci_readb(host, SDHCI_BLOCK_GAP_CONTROL));
+ pr_err(DRIVER_NAME ": Wake-up: 0x%08x | Clock: 0x%08x\n",
+ sdhci_readb(host, SDHCI_WAKE_UP_CONTROL),
+ sdhci_readw(host, SDHCI_CLOCK_CONTROL));
+ pr_err(DRIVER_NAME ": Timeout: 0x%08x | Int stat: 0x%08x\n",
+ sdhci_readb(host, SDHCI_TIMEOUT_CONTROL),
+ sdhci_readl(host, SDHCI_INT_STATUS));
+ pr_err(DRIVER_NAME ": Int enab: 0x%08x | Sig enab: 0x%08x\n",
+ sdhci_readl(host, SDHCI_INT_ENABLE),
+ sdhci_readl(host, SDHCI_SIGNAL_ENABLE));
+ pr_err(DRIVER_NAME ": AC12 err: 0x%08x | Slot int: 0x%08x\n",
+ sdhci_readw(host, SDHCI_ACMD12_ERR),
+ sdhci_readw(host, SDHCI_SLOT_INT_STATUS));
+ pr_err(DRIVER_NAME ": Caps: 0x%08x | Caps_1: 0x%08x\n",
+ sdhci_readl(host, SDHCI_CAPABILITIES),
+ sdhci_readl(host, SDHCI_CAPABILITIES_1));
+ pr_err(DRIVER_NAME ": Cmd: 0x%08x | Max curr: 0x%08x\n",
+ sdhci_readw(host, SDHCI_COMMAND),
+ sdhci_readl(host, SDHCI_MAX_CURRENT));
+ pr_err(DRIVER_NAME ": Host ctl2: 0x%08x\n",
+ sdhci_readw(host, SDHCI_HOST_CONTROL2));
if (host->flags & SDHCI_USE_ADMA) {
if (host->flags & SDHCI_USE_64_BIT_DMA)
- pr_debug(DRIVER_NAME ": ADMA Err: 0x%08x | ADMA Ptr: 0x%08x%08x\n",
- readl(host->ioaddr + SDHCI_ADMA_ERROR),
- readl(host->ioaddr + SDHCI_ADMA_ADDRESS_HI),
- readl(host->ioaddr + SDHCI_ADMA_ADDRESS));
+ pr_err(DRIVER_NAME ": ADMA Err: 0x%08x | ADMA Ptr: 0x%08x%08x\n",
+ readl(host->ioaddr + SDHCI_ADMA_ERROR),
+ readl(host->ioaddr + SDHCI_ADMA_ADDRESS_HI),
+ readl(host->ioaddr + SDHCI_ADMA_ADDRESS));
else
- pr_debug(DRIVER_NAME ": ADMA Err: 0x%08x | ADMA Ptr: 0x%08x\n",
- readl(host->ioaddr + SDHCI_ADMA_ERROR),
- readl(host->ioaddr + SDHCI_ADMA_ADDRESS));
+ pr_err(DRIVER_NAME ": ADMA Err: 0x%08x | ADMA Ptr: 0x%08x\n",
+ readl(host->ioaddr + SDHCI_ADMA_ERROR),
+ readl(host->ioaddr + SDHCI_ADMA_ADDRESS));
}
- pr_debug(DRIVER_NAME ": ===========================================\n");
+ pr_err(DRIVER_NAME ": ===========================================\n");
}
/*****************************************************************************\
--
1.9.1
--
To unsubscribe from this list: send the line "unsubscribe linux-mmc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
