From: Peter Chen <peter.chen@xxxxxxxxxxxxx>
The current dts describes USB HUB's property at USB controller's
entry, it is improper. The USB HUB should be the child node
under USB controller, with "usb-pwrseq" phandle to handle power
sequence stuffs.
Signed-off-by: Peter Chen <peter.chen@xxxxxxxxxxxxx>
Signed-off-by: Maciej S. Szmigiero <mail@xxxxxxxxxxxxxxxxxxxxx>
---
arch/arm/boot/dts/imx6qdl-udoo.dtsi | 30 +++++++++++++++++-------------
1 file changed, 17 insertions(+), 13 deletions(-)
diff --git a/arch/arm/boot/dts/imx6qdl-udoo.dtsi b/arch/arm/boot/dts/imx6qdl-udoo.dtsi
index 3bee2f9..f921174 100644
--- a/arch/arm/boot/dts/imx6qdl-udoo.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-udoo.dtsi
@@ -9,6 +9,8 @@
*
*/
+#include <dt-bindings/gpio/gpio.h>
+
/ {
aliases {
backlight = &backlight;
@@ -58,17 +60,6 @@
#address-cells = <1>;
#size-cells = <0>;
- reg_usb_h1_vbus: regulator@0 {
- compatible = "regulator-fixed";
- reg = <0>;
- regulator-name = "usb_h1_vbus";
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- enable-active-high;
- startup-delay-us = <2>; /* USB2415 requires a POR of 1 us minimum */
- gpio = <&gpio7 12 0>;
- };
-
reg_panel: regulator@1 {
compatible = "regulator-fixed";
reg = <1>;
@@ -89,6 +80,13 @@
mux-int-port = <1>;
mux-ext-port = <6>;
};
+
+ usb2415_pwrseq: usb2415_pwrseq {
+ compatible = "usb-pwrseq-generic";
+ clocks = <&clks IMX6QDL_CLK_CKO>;
+ reset-gpios = <&gpio7 12 GPIO_ACTIVE_LOW>;
+ reset-duration-us = <3000>;
+ };
};
&fec {
@@ -259,9 +257,15 @@
&usbh1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usbh>;
- vbus-supply = <®_usb_h1_vbus>;
- clocks = <&clks IMX6QDL_CLK_CKO>;
status = "okay";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+ hub: usb2415@1 {
+ compatible = "usb424,2514";
+ reg = <1>;
+ usb-pwrseq = <&usb2415_pwrseq>;
+ };
};
&usdhc3 {
--
1.9.1
--
To unsubscribe from this list: send the line "unsubscribe linux-mmc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
