On 14/06/16 11:19, Gregory CLEMENT wrote:
> Hi Adrian,
>
> On mar., juin 14 2016, Adrian Hunter <adrian.hunter@xxxxxxxxx> wrote:
>
>> On 09/06/16 10:10, Gregory CLEMENT wrote:
>>> From: Victor Gu <xigu@xxxxxxxxxxx>
>>>
>>> This path adds the driver for the Marvell Xenon eMMC host controller
>>> which supports eMMC 5.1, SD 3.0.
>>>
>>> However this driver supports only up to eMMC 5.0 since the command queue
>>> feature is not included (yet) in the driver.
>>>
>>> [gregory.clement@xxxxxxxxxxxxxxxxxx:
>>> - reformulate commit log
>>> - overload the sdhci_set_uhs_signaling function instead of using a quirk
>>> - fix a kconfig dependency
>>> - remove dead code]
>>>
>>> Signed-off-by: Victor Gu <xigu@xxxxxxxxxxx>
>>> Signed-off-by: Gregory CLEMENT <gregory.clement@xxxxxxxxxxxxxxxxxx>
>>> ---
>>> drivers/mmc/host/Kconfig | 10 +
>>> drivers/mmc/host/Makefile | 1 +
>>> drivers/mmc/host/sdhci-xenon.c | 1164 ++++++++++++++++++++++++++++++++++++++++
>>> 3 files changed, 1175 insertions(+)
>>> create mode 100644 drivers/mmc/host/sdhci-xenon.c
>>>
>>
>> <SNIP>
>>
>>> diff --git a/drivers/mmc/host/sdhci-xenon.c b/drivers/mmc/host/sdhci-xenon.c
>>> new file mode 100644
>>> index 000000000000..43c06db95872
>>> --- /dev/null
>>> +++ b/drivers/mmc/host/sdhci-xenon.c
>>
>> <SNIP>
>>
>>> +static int sdhci_xenon_delay_adj_test(struct sdhci_host *host,
>>> + struct mmc_card *card, unsigned int delay,
>>> + bool invert, bool phase)
>>> +{
>>> + int ret;
>>> + struct mmc_card *oldcard;
>>> +
>>> + sdhci_xenon_set_fix_delay(host, delay, invert, phase);
>>> +
>>> + /*
>>> + * If the card is not yet associated to the host, we
>>> + * temporally do it
>>> + */
>>> + oldcard = card->host->card;
>>> + if (!oldcard)
>>> + card->host->card = card;
>>> + ret = card_alive(card);
>>
>> This looks like an abuse of bus_ops->alive(). You will need to get
>> agreement with Ulf how to handle this. I will wait for Ulf's comments
>> before reviewing this patch set further.
>
> Actually I modified this part of the driver to use
> bus_ops->alive(). Initially, the alive() code was more or less copied
> and paste from the mmc core with ugly include from mmc_ops.h and
> sdio_ops.h to make it work. I find it cleaner to directly access the
> alive() function.
>
> Could you explain why it is an abuse of bus_ops->alive()?
bus_ops->alive() is used to determine if the card is present and able to
respond. You seem to be using it for a different purpose. I will wait for
Ulf's comments.
--
To unsubscribe from this list: send the line "unsubscribe linux-mmc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
