On 13/06/16 15:18, Al Cooper wrote:
> Signed-off-by: Al Cooper <alcooperx@xxxxxxxxx>
The absence of a commit message is a red flag to some people. You could
write, for example, whether the driver is missing any features that still
need to be added.
> ---
> MAINTAINERS | 7 ++
> drivers/mmc/host/Kconfig | 11 ++++
> drivers/mmc/host/Makefile | 1 +
> drivers/mmc/host/sdhci-brcmstb.c | 137 +++++++++++++++++++++++++++++++++++++++
> 4 files changed, 156 insertions(+)
> create mode 100644 drivers/mmc/host/sdhci-brcmstb.c
>
> diff --git a/MAINTAINERS b/MAINTAINERS
> index 7304d2e..e5528cf 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -10187,6 +10187,13 @@ F: tools/testing/selftests/seccomp/*
> K: \bsecure_computing
> K: \bTIF_SECCOMP\b
>
> +SECURE DIGITAL HOST CONTROLLER INTERFACE (SDHCI) Broadcom BRCMSTB DRIVER
> +M: Al Cooper <alcooperx@xxxxxxxxx>
> +L: linux-mmc@xxxxxxxxxxxxxxx
> +L: bcm-kernel-feedback-list@xxxxxxxxxxxx
> +S: Maintained
> +F: drivers/mmc/host/sdhci-brcmstb*
> +
> SECURE DIGITAL HOST CONTROLLER INTERFACE (SDHCI) SAMSUNG DRIVER
> M: Ben Dooks <ben-linux@xxxxxxxxx>
> M: Jaehoon Chung <jh80.chung@xxxxxxxxxxx>
> diff --git a/drivers/mmc/host/Kconfig b/drivers/mmc/host/Kconfig
> index 0aa484c..1038c9a 100644
> --- a/drivers/mmc/host/Kconfig
> +++ b/drivers/mmc/host/Kconfig
> @@ -798,3 +798,14 @@ config MMC_SDHCI_MICROCHIP_PIC32
> If you have a controller with this interface, say Y or M here.
>
> If unsure, say N.
> +config MMC_SDHCI_BRCMSTB
> + tristate "Broadcom SDIO/SD/MMC support"
> + depends on ARCH_BRCMSTB || BMIPS_GENERIC
> + depends on MMC_SDHCI_PLTFM
> + default y
> + select MMC_SDHCI_IO_ACCESSORS
> + help
> + This selects support for the SDIO/SD/MMC Host Controller on
> + Broadcom STB SoCs.
> +
> + If unsure, say Y.
> diff --git a/drivers/mmc/host/Makefile b/drivers/mmc/host/Makefile
> index af918d2..2075c11 100644
> --- a/drivers/mmc/host/Makefile
> +++ b/drivers/mmc/host/Makefile
> @@ -76,6 +76,7 @@ obj-$(CONFIG_MMC_SDHCI_IPROC) += sdhci-iproc.o
> obj-$(CONFIG_MMC_SDHCI_MSM) += sdhci-msm.o
> obj-$(CONFIG_MMC_SDHCI_ST) += sdhci-st.o
> obj-$(CONFIG_MMC_SDHCI_MICROCHIP_PIC32) += sdhci-pic32.o
> +obj-$(CONFIG_MMC_SDHCI_BRCMSTB) += sdhci-brcmstb.o
>
> ifeq ($(CONFIG_CB710_DEBUG),y)
> CFLAGS-cb710-mmc += -DDEBUG
> diff --git a/drivers/mmc/host/sdhci-brcmstb.c b/drivers/mmc/host/sdhci-brcmstb.c
> new file mode 100644
> index 0000000..38882ef
> --- /dev/null
> +++ b/drivers/mmc/host/sdhci-brcmstb.c
> @@ -0,0 +1,137 @@
> +/*
> + * sdhci-brcmstb.c Support for SDHCI on Broadcom BRCMSTB SoC's
> + *
> + * Copyright (C) 2015 Broadcom Corporation
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + *
> + */
> +
> +#include <linux/io.h>
> +#include <linux/mmc/host.h>
> +#include <linux/module.h>
> +#include <linux/of.h>
> +
> +#include "sdhci-pltfm.h"
> +
> +#ifdef CONFIG_PM_SLEEP
> +
> +static int sdhci_brcmstb_suspend(struct device *dev)
> +{
> + struct sdhci_host *host = dev_get_drvdata(dev);
> + struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
> + int res;
> +
> + res = sdhci_suspend_host(host);
> + if (res)
> + return res;
> + clk_disable_unprepare(pltfm_host->clk);
> + return res;
> +}
> +
> +static int sdhci_brcmstb_resume(struct device *dev)
> +{
> + struct sdhci_host *host = dev_get_drvdata(dev);
> + struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
> + int err;
> +
> + err = clk_prepare_enable(pltfm_host->clk);
> + if (err)
> + return err;
> + return sdhci_resume_host(host);
> +}
> +
> +#endif /* CONFIG_PM_SLEEP */
> +
> +static SIMPLE_DEV_PM_OPS(sdhci_brcmstb_pmops, sdhci_brcmstb_suspend,
> + sdhci_brcmstb_resume);
> +
> +static const struct sdhci_ops sdhci_brcmstb_ops = {
> + .set_clock = sdhci_set_clock,
> + .set_bus_width = sdhci_set_bus_width,
> + .reset = sdhci_reset,
> + .set_uhs_signaling = sdhci_set_uhs_signaling,
> +};
> +
> +static struct sdhci_pltfm_data sdhci_brcmstb_pdata = {
> + .ops = &sdhci_brcmstb_ops,
> +};
> +
> +static int sdhci_brcmstb_probe(struct platform_device *pdev)
> +{
> + struct sdhci_host *host;
> + struct sdhci_pltfm_host *pltfm_host;
> + struct clk *clk;
> + int res;
> +
> + clk = devm_clk_get(&pdev->dev, NULL);
> + if (IS_ERR(clk)) {
> + dev_err(&pdev->dev, "Clock not found in Device Tree\n");
> + clk = NULL;
> + }
> + res = clk_prepare_enable(clk);
> + if (res)
> + return res;
> +
> + host = sdhci_pltfm_init(pdev, &sdhci_brcmstb_pdata, 0);
> + if (IS_ERR(host))
Don't you need clk_disable_unprepare(clk) here.
> + return PTR_ERR(host);
> +
> + /* Enable MMC_CAP2_HC_ERASE_SZ for better max discard calculations */
> + host->mmc->caps2 |= MMC_CAP2_HC_ERASE_SZ;
> +
> + sdhci_get_of_property(pdev);
> + mmc_of_parse(host->mmc);
> +
> + /*
> + * Supply the existing CAPS, but clear the UHS modes. This
> + * will allow these modes to be specified by device tree
> + * properties through mmc_of_parse().
> + */
> + host->caps = sdhci_readl(host, SDHCI_CAPABILITIES);
> + host->caps1 = sdhci_readl(host, SDHCI_CAPABILITIES_1);
> + host->caps1 &= ~(SDHCI_SUPPORT_SDR50 | SDHCI_SUPPORT_SDR104 |
> + SDHCI_SUPPORT_DDR50);
> + host->quirks |= SDHCI_QUIRK_MISSING_CAPS |
> + SDHCI_QUIRK_BROKEN_TIMEOUT_VAL;
> +
> + res = sdhci_add_host(host);
> + if (res) {
And here
> + sdhci_pltfm_free(pdev);
> + return res;
> + }
> +
> + pltfm_host = sdhci_priv(host);
> + pltfm_host->clk = clk;
> + return res;
> +}
> +
> +static const struct of_device_id sdhci_brcm_of_match[] = {
> + { .compatible = "brcm,bcm7425-sdhci" },
> + {},
> +};
> +MODULE_DEVICE_TABLE(of, sdhci_brcm_of_match);
> +
> +static struct platform_driver sdhci_brcmstb_driver = {
> + .driver = {
> + .name = "sdhci-brcmstb",
> + .owner = THIS_MODULE,
> + .pm = &sdhci_brcmstb_pmops,
> + .of_match_table = of_match_ptr(sdhci_brcm_of_match),
> + },
> + .probe = sdhci_brcmstb_probe,
> + .remove = sdhci_pltfm_unregister,
> +};
> +
> +module_platform_driver(sdhci_brcmstb_driver);
> +
> +MODULE_DESCRIPTION("SDHCI driver for Broadcom BRCMSTB SoCs");
> +MODULE_AUTHOR("Broadcom");
> +MODULE_LICENSE("GPL v2");
>
--
To unsubscribe from this list: send the line "unsubscribe linux-mmc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
