在 2016/6/14 7:04, Douglas Anderson 写道:
There's no reason to store the return value of rockchip_emmc_phy_power() in a variable nor to check it. Just return it. Signed-off-by: Douglas Anderson <dianders@xxxxxxxxxxxx> --- Changes in v2: - Move code cleanup before set phyctrl_frqsel based on card clock (Shawn)
Looks good to me. Reviewed-by: Shawn Lin <shawn.lin@xxxxxxxxxxxxxx>
drivers/phy/phy-rockchip-emmc.c | 14 ++------------ 1 file changed, 2 insertions(+), 12 deletions(-) diff --git a/drivers/phy/phy-rockchip-emmc.c b/drivers/phy/phy-rockchip-emmc.c index 2d059c046978..23fe50864526 100644 --- a/drivers/phy/phy-rockchip-emmc.c +++ b/drivers/phy/phy-rockchip-emmc.c @@ -169,20 +169,14 @@ static int rockchip_emmc_phy_power(struct rockchip_emmc_phy *rk_phy, static int rockchip_emmc_phy_power_off(struct phy *phy) { struct rockchip_emmc_phy *rk_phy = phy_get_drvdata(phy); - int ret = 0; /* Power down emmc phy analog blocks */ - ret = rockchip_emmc_phy_power(rk_phy, PHYCTRL_PDB_PWR_OFF); - if (ret) - return ret; - - return 0; + return rockchip_emmc_phy_power(rk_phy, PHYCTRL_PDB_PWR_OFF); } static int rockchip_emmc_phy_power_on(struct phy *phy) { struct rockchip_emmc_phy *rk_phy = phy_get_drvdata(phy); - int ret = 0; /* DLL operation: 200 MHz */ regmap_write(rk_phy->reg_base, @@ -213,11 +207,7 @@ static int rockchip_emmc_phy_power_on(struct phy *phy) PHYCTRL_OTAPDLYSEL_SHIFT)); /* Power up emmc phy analog blocks */ - ret = rockchip_emmc_phy_power(rk_phy, PHYCTRL_PDB_PWR_ON); - if (ret) - return ret; - - return 0; + return rockchip_emmc_phy_power(rk_phy, PHYCTRL_PDB_PWR_ON); } static const struct phy_ops ops = {
-- Best Regards Shawn Lin -- To unsubscribe from this list: send the line "unsubscribe linux-mmc" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html