[PATCH RFC 20/46] mmc: sdhci: Support cap_cmd_during_tfr requests

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Now SDHCI supports commands during transfer, enable support for the core
API.

There are 3 small changes needed:

First, auto-CMD12 cannot be used with a cap_cmd_during_tfr request because
the host controller cannot expect the command line to be available.

Secondly, a cap_cmd_during_tfr request must not send a stop command, again
because the host controller cannot expect the command line to be available.

Thirdly, when a cap_cmd_during_tfr command completes, use
mmc_command_complete() to notify the upper layers that the command line is
now available for further commands.

Signed-off-by: Adrian Hunter <adrian.hunter@xxxxxxxxx>
---
 drivers/mmc/host/sdhci.c | 16 ++++++++++++++--
 1 file changed, 14 insertions(+), 2 deletions(-)

diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c
index e9eb71861764..aa2aa16386b9 100644
--- a/drivers/mmc/host/sdhci.c
+++ b/drivers/mmc/host/sdhci.c
@@ -884,7 +884,8 @@ static void sdhci_prepare_data(struct sdhci_host *host, struct mmc_command *cmd)
 static inline bool sdhci_auto_cmd12(struct sdhci_host *host,
 				    struct mmc_request *mrq)
 {
-	return !mrq->sbc && (host->flags & SDHCI_AUTO_CMD12);
+	return !mrq->sbc && (host->flags & SDHCI_AUTO_CMD12) &&
+	       !mrq->cap_cmd_during_tfr;
 }
 
 static void sdhci_set_transfer_mode(struct sdhci_host *host,
@@ -1027,7 +1028,15 @@ static void sdhci_finish_data(struct sdhci_host *host)
 			sdhci_do_reset(host, SDHCI_RESET_DATA);
 		}
 
-		sdhci_send_command(host, data->stop);
+		/*
+		 * 'cap_cmd_during_tfr' request must not use the command line
+		 * after mmc_command_done() has been called. It is upper layer's
+		 * responsibility to send the stop command if required.
+		 */
+		if (data->mrq->cap_cmd_during_tfr)
+			sdhci_finish_mrq(host, data->mrq);
+		else
+			sdhci_send_command(host, data->stop);
 	} else {
 		sdhci_finish_mrq(host, data->mrq);
 	}
@@ -1159,6 +1168,9 @@ static void sdhci_finish_command(struct sdhci_host *host)
 		}
 	}
 
+	if (cmd->mrq->cap_cmd_during_tfr && cmd == cmd->mrq->cmd)
+		mmc_command_done(host->mmc, cmd->mrq);
+
 	/*
 	 * The host can send and interrupt when the busy state has
 	 * ended, allowing us to wait without wasting CPU cycles.
-- 
1.9.1

--
To unsubscribe from this list: send the line "unsubscribe linux-mmc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Linux USB Devel]     [Linux Media]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux