In order to support commands during data transfer, there will have to be up
to two active requests (mrqs) at a time, instead of just one. That means
host->mrq will not be able to be used.
In several places, host->mrq is used when instead the mrq can be determined
from the cmd or data pointers. Reduce the use of host->mrq by doing that.
Signed-off-by: Adrian Hunter <adrian.hunter@xxxxxxxxx>
---
drivers/mmc/host/sdhci.c | 16 ++++++++--------
1 file changed, 8 insertions(+), 8 deletions(-)
diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c
index 82e8786098b2..02a8522dc74e 100644
--- a/drivers/mmc/host/sdhci.c
+++ b/drivers/mmc/host/sdhci.c
@@ -906,12 +906,12 @@ static void sdhci_set_transfer_mode(struct sdhci_host *host,
* If we are sending CMD23, CMD12 never gets sent
* on successful completion (so no Auto-CMD12).
*/
- if (!host->mrq->sbc && (host->flags & SDHCI_AUTO_CMD12) &&
+ if (!cmd->mrq->sbc && (host->flags & SDHCI_AUTO_CMD12) &&
(cmd->opcode != SD_IO_RW_EXTENDED))
mode |= SDHCI_TRNS_AUTO_CMD12;
- else if (host->mrq->sbc && (host->flags & SDHCI_AUTO_CMD23)) {
+ else if (cmd->mrq->sbc && (host->flags & SDHCI_AUTO_CMD23)) {
mode |= SDHCI_TRNS_AUTO_CMD23;
- sdhci_writel(host, host->mrq->sbc->arg, SDHCI_ARGUMENT2);
+ sdhci_writel(host, cmd->mrq->sbc->arg, SDHCI_ARGUMENT2);
}
}
@@ -954,7 +954,7 @@ static void sdhci_finish_data(struct sdhci_host *host)
*/
if (data->stop &&
(data->error ||
- !host->mrq->sbc)) {
+ !data->mrq->sbc)) {
/*
* The controller needs a reset of internal state machines
@@ -990,7 +990,7 @@ void sdhci_send_command(struct sdhci_host *host, struct mmc_command *cmd)
/* We shouldn't wait for data inihibit for stop commands, even
though they might use busy signaling */
- if (host->mrq->data && (cmd == host->mrq->data->stop))
+ if (cmd->mrq->data && (cmd == cmd->mrq->data->stop))
mask &= ~SDHCI_DATA_INHIBIT;
while (sdhci_readl(host, SDHCI_PRESENT_STATE) & mask) {
@@ -1100,8 +1100,8 @@ static void sdhci_finish_command(struct sdhci_host *host)
}
/* Finished CMD23, now send actual command. */
- if (cmd == host->mrq->sbc) {
- sdhci_send_command(host, host->mrq->cmd);
+ if (cmd == cmd->mrq->sbc) {
+ sdhci_send_command(host, cmd->mrq->cmd);
} else {
/* Processed actual command. */
@@ -1408,7 +1408,7 @@ static void sdhci_request(struct mmc_host *mmc, struct mmc_request *mrq)
host->mrq = mrq;
if (!present || host->flags & SDHCI_DEVICE_DEAD) {
- host->mrq->cmd->error = -ENOMEDIUM;
+ mrq->cmd->error = -ENOMEDIUM;
tasklet_schedule(&host->finish_tasklet);
} else {
if (mrq->sbc && !(host->flags & SDHCI_AUTO_CMD23))
--
1.9.1
--
To unsubscribe from this list: send the line "unsubscribe linux-mmc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
