On 05/30/2016 06:45 PM, Shawn Lin wrote: > Hi, > > 在 2016/5/30 15:40, Jaehoon Chung 写道: >> After applied "remove lots of IS_ERR_VALUE abuses", it shoold be >> misoperation. (commit 287980e49) >> If mmc_bus_test is successful, it returned the bus-witdh bit. >> >> The below log is error log >> [ 2.542260] mmc0: mmc_select_hs200 failed, error 3 >> [ 2.542275] mmc0: error 3 whilst initialising MMC card >> > > The same as this patch[0]? Yes, discard this patch. Thanks for noticing this. Best Regards, Jaehoon Chung > > [0]https://patchwork.kernel.org/patch/9139673/ > >> Signed-off-by: Jaehoon Chung <jh80.chung@xxxxxxxxxxx> >> --- >> drivers/mmc/core/mmc.c | 4 ++-- >> 1 file changed, 2 insertions(+), 2 deletions(-) >> >> diff --git a/drivers/mmc/core/mmc.c b/drivers/mmc/core/mmc.c >> index c984321..aafb73d 100644 >> --- a/drivers/mmc/core/mmc.c >> +++ b/drivers/mmc/core/mmc.c >> @@ -1276,7 +1276,7 @@ static int mmc_select_hs200(struct mmc_card *card) >> * switch to HS200 mode if bus width is set successfully. >> */ >> err = mmc_select_bus_width(card); >> - if (!err) { >> + if (err > 0) { >> val = EXT_CSD_TIMING_HS200 | >> card->drive_strength << EXT_CSD_DRV_STR_SHIFT; >> err = __mmc_switch(card, EXT_CSD_CMD_SET_NORMAL, >> @@ -1583,7 +1583,7 @@ static int mmc_init_card(struct mmc_host *host, u32 ocr, >> } else if (mmc_card_hs(card)) { >> /* Select the desired bus width optionally */ >> err = mmc_select_bus_width(card); >> - if (!err) { >> + if (err > 0) { >> err = mmc_select_hs_ddr(card); >> if (err) >> goto free_card; >> > > -- > To unsubscribe from this list: send the line "unsubscribe linux-mmc" in > the body of a message to majordomo@xxxxxxxxxxxxxxx > More majordomo info at http://vger.kernel.org/majordomo-info.html > > > -- To unsubscribe from this list: send the line "unsubscribe linux-mmc" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
