On 05/06/2016 07:44 AM, Peter Chen wrote: > On Thu, May 05, 2016 at 05:42:40PM -0500, Rob Herring wrote: >> On Thu, May 05, 2016 at 02:34:13PM +0200, Krzysztof Kozlowski wrote: >>> Hi, >>> >>> This is a different, second try to fix usb3503+lan on Odroid U3 board >>> if it was initialized by bootloader (e.g. for TFTP boot). >>> >>> First version: >>> http://www.spinics.net/lists/linux-usb/msg140042.html >>> >>> >>> Problem >>> ======= >>> When Odroid U3 (usb3503 + smsc95xx + max77686) boots from network (TFTP), >>> the usb3503 and LAN smsc95xx do not show up in "lsusb". Hard-reset >>> is required, e.g. by suspend to RAM. The actual TFTP boot does >>> not have to happen. Just "usb start" from U-Boot is sufficient. >>> >>> From the schematics, the regulator is a supply only to LAN, however >>> without toggling it off/on, the usb3503 hub won appear neither. >>> >>> >>> Solution >>> ======== >>> This is very similar to the MMC pwrseq behavior so the idea is to: >>> 1. Move MMC pwrseq drivers to generic place, >> >> You can do that, but I'm going to NAK any use of pwrseq bindings outside >> of MMC. I think it is the wrong way to do things. The DT should describe >> the devices. If they happen to be "simple" then the core can walk the >> tree and do any setup. For example, look for "reset-gpios" and toggle >> that GPIO. There is no need for a special node. >> > > Oh, I am doing the same thing like this patch set doing. Shame on me that I did not use Google before starting the work. I could just extend your patchset. I think we can combine our efforts. Best regards, Krzysztof -- To unsubscribe from this list: send the line "unsubscribe linux-mmc" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
