On Thu, May 05, 2016 at 10:09:47AM -0400, Alan Stern wrote: > On Thu, 5 May 2016, Krzysztof Kozlowski wrote: > > > The autodetection of attached USB device might not work on certain > > boards where the power is delivered externally. These devices also might > > require a hard reset. Use pwrseq for that in USB hub. > > > > Signed-off-by: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx> > > --- > > drivers/usb/core/hub.c | 11 +++++++++++ > > 1 file changed, 11 insertions(+) > > > > diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c > > index 1c82fcc448f5..0fddaacc62bf 100644 > > --- a/drivers/usb/core/hub.c > > +++ b/drivers/usb/core/hub.c > > @@ -26,6 +26,7 @@ > > #include <linux/mutex.h> > > #include <linux/random.h> > > #include <linux/pm_qos.h> > > +#include <linux/pwrseq.h> > > > > #include <asm/uaccess.h> > > #include <asm/byteorder.h> > > @@ -1661,7 +1662,17 @@ static int hub_configure(struct usb_hub *hub, > > > > usb_hub_adjust_deviceremovable(hdev, hub->descriptor); > > > > + /* FIXME: When do the pre-power-on? */ > > It's hard to answer this without knowing what pre-power-on involves. In my particular case, I want to achieve a full reset through regulator (off and on) because the bootloader left it in initialized state. I assume that if bootloader did not configure the device, the reset won't be harmful. In a MMC case, this pre-power-on on is setting the 'reset' GPIO (thus triggering the reset) and post-power-on is clearing the 'reset'. > Why not create a pwrseq_power_on() routine that does pre_power_on > followed by post_power_on? For my purpose it seems sensible. > > > + /* > > + for (i = 0; i < maxchild; i++) > > + pwrseq_pre_power_on(hub->ports[i]->pwrseq); > > + */ > > + > > + for (i = 0; i < maxchild; i++) > > + pwrseq_post_power_on(hub->ports[i]->pwrseq); > > This is patch 10/13. hub->ports[i]->pwrseq doesn't get added until > 11/13. Obviously you never tried compiling each patch in the series. Ahh yes, I forgot to reorder them. Thanks for spotting this. > > > + > > hub_activate(hub, HUB_INIT); > > + > > Unnecessary blank line added. Thanks for feedback, Krzysztof -- To unsubscribe from this list: send the line "unsubscribe linux-mmc" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
