On Tue, Apr 26, 2016 at 10:58:45AM +0200, Ludovic Desroches wrote:
> On Wed, Apr 20, 2016 at 12:22:59PM +0000, Prabu Thangamuthu wrote:
> > Patch for Standard SD Host Controller Interface compliant Synopsys
> > sdhci-dwc controller driver. This code supports PCI based interface.
> >
> > Signed-off-by: Prabu Thangamuthu <prabu.t@xxxxxxxxxxxx>
> > ---
> > Change log v3:
> > -Removed unused code.
> > -Updated review comments.
> >
> > Change log v2:
> > -Removed Synopsys specific PCI device ID's from pci_ids.h.
> > -Updated the PCI device ID's in sdhci-pci-core.c.
> >
> > MAINTAINERS | 7 +
> > drivers/mmc/host/Makefile | 3 +-
> > drivers/mmc/host/sdhci-pci-core.c | 14 ++
> > drivers/mmc/host/sdhci-pci-dwc.c | 260 ++++++++++++++++++++++++++++++++++++++
> > drivers/mmc/host/sdhci-pci-dwc.h | 55 ++++++++
> > 5 files changed, 338 insertions(+), 1 deletion(-)
> > create mode 100644 drivers/mmc/host/sdhci-pci-dwc.c
> > create mode 100644 drivers/mmc/host/sdhci-pci-dwc.h
> >
[snip]
> > +static int snps_init_clock(struct sdhci_host *host)
> > +{
> > + int div = 0;
> > + int mul = 0;
> > + int div_val = 0;
> > + int mul_val = 0;
> > + int mul_div_val = 0;
> > + int reg = 0;
> > + u32 mask = 0;
> > +
>
> Some variables don't need initialization here or you can directly assign
> the right value: int div = 2, mul = 2, etc.
div and mul are even useless, they are const. You can directly declare
mul_val = 1, div_val = 1.
Regards
Ludovic
>
> > + /* Configure the BCLK DRP to get 100 MHZ Clock */
> > +
> > + /*
> > + * To get 100MHz from 100MHz input freq,
> > + * mul=2 and div=2
> > + * Formula: output_clock = (input clock * mul) / div
> > + */
> > + mul = 2;
> > + div = 2;
> > + mul_val = mul - 1;
> > + div_val = div - 1;
> > + /*
> > + * Program the DCM DRP
> > + * Step 1: Assert DCM Reset
> > + * Step 2: Program the mul and div values in DRP
> > + * Step 3: Read from DRP base 0x00 to restore DCM output as per
> > + * www.xilinx.com/support/documentation/user_guides/ug191.pdf
> > + * Step 4: De-Assert reset to DCM
> > + */
> > + mask = SDHC_BCLK_DCM_RST;
> > + snps_reset_dcm(host, mask, 1);
> > +
> > + mul_div_val = (mul_val << 8) | div_val;
> > + sdhci_writew(host, mul_div_val, BCLK_DCM_MUL_DIV_DRP);
> > +
> > + reg = sdhci_readl(host, BCLK_DCM_DRP_BASE_51);
> > +
> > + snps_reset_dcm(host, mask, 0);
> > +
> > + /*
> > + * By Default Clocks to Controller are OFF.
> > + * Before stack applies reset; we need to turn on the clock
> > + */
> > + sdhci_writew(host, SDHCI_CLOCK_INT_EN, SDHCI_CLOCK_CONTROL);
> > +
> > + return 0;
> > +
> > +}
--
To unsubscribe from this list: send the line "unsubscribe linux-mmc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
