> -----Original Message----- > From: Scott Wood [mailto:oss@xxxxxxxxxxxx] > Sent: Friday, April 22, 2016 7:08 AM > To: Yangbo Lu; linux-mmc@xxxxxxxxxxxxxxx; linuxppc-dev@xxxxxxxxxxxxxxxx; > devicetree@xxxxxxxxxxxxxxx > Cc: ulf.hansson@xxxxxxxxxx; Rob Herring; Scott Wood > Subject: Re: [PATCH 1/2] powerpc/85xx: adapt QorIQ eSDHC to the new > clocking model > > On Wed, 2016-04-20 at 18:20 +0800, Yangbo Lu wrote: > > Provide clocks property instead of clock-frequency for QorIQ eSDHC dts > > node to adapt to the new clocking model, so that the driver could get > > clock value by the common clk API and the u-boot could remove the > > clock fixup. > > > > Signed-off-by: Yangbo Lu <yangbo.lu@xxxxxxx> > > --- > > arch/powerpc/boot/dts/fsl/qoriq-esdhc-0.dtsi | 2 +- > > 1 file changed, 1 insertion(+), 1 deletion(-) > > > > diff --git a/arch/powerpc/boot/dts/fsl/qoriq-esdhc-0.dtsi > > b/arch/powerpc/boot/dts/fsl/qoriq-esdhc-0.dtsi > > index 20835ae..ddbe562 100644 > > --- a/arch/powerpc/boot/dts/fsl/qoriq-esdhc-0.dtsi > > +++ b/arch/powerpc/boot/dts/fsl/qoriq-esdhc-0.dtsi > > @@ -36,5 +36,5 @@ sdhc: sdhc@114000 { > > compatible = "fsl,esdhc"; > > reg = <0x114000 0x1000>; > > interrupts = <48 2 0 0>; > > - clock-frequency = <0>; > > + clocks = <&clockgen 4 1>; > > }; > > Binding update? > > -Scott [Lu Yangbo-B47093] Sorry, did you mean the doc update? ... It has already had a description in Documentation/devicetree/bindings/clock/qoriq-clock.txt - clock-frequency: Input system clock frequency (SYSCLK) - clocks: If clock-frequency is not specified, sysclk may be provided as an input clock. Either clock-frequency or clocks must be provided. ��.n��������+%������w��{.n�����{��i��)�� jg��� �����ݢj����G���� ���j:+v���w�m������w�������h�����٥
