The tuning bits like FBCLK_SEL, SMP_CLK_SEL and DLY_CELL which affects timing may have already been set by ROM if booting from SD3.0 mode like SDR104. Let's clear it first during hw initialization before do the new card enumeration. For system resume case, it's safe to clear them too since the following card re-initialization in mmc_xx_init_card() will do retuning and set correct value again. Signed-off-by: Dong Aisheng <aisheng.dong@xxxxxxx> --- drivers/mmc/host/sdhci-esdhc-imx.c | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/drivers/mmc/host/sdhci-esdhc-imx.c b/drivers/mmc/host/sdhci-esdhc-imx.c index 98aa6b5..6a699d1 100644 --- a/drivers/mmc/host/sdhci-esdhc-imx.c +++ b/drivers/mmc/host/sdhci-esdhc-imx.c @@ -1018,6 +1018,11 @@ static void sdhci_esdhc_imx_hwinit(struct sdhci_host *host) } writel(tmp, host->ioaddr + ESDHC_TUNING_CTRL); } + + /* clear tuning bits in case ROM has set it already */ + writel(0x0, host->ioaddr + ESDHC_MIX_CTRL); + writel(0x0, host->ioaddr + SDHCI_ACMD12_ERR); + writel(0x0, host->ioaddr + ESDHC_TUNE_CTRL_STATUS); } } -- 1.9.1 -- To unsubscribe from this list: send the line "unsubscribe linux-mmc" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
