Thanks for reviewing v3. This patchset aims at converting the pwrseq devices to proper in drivers, The issue is that on Qualcomm based platforms, most of the gpios require a pinctrl setup. Existing pwrseq code does not do any kind of pinctrl setup. So this makes the pwrseq unusable on those platfroms. Convert the pwrseq to proper drivers so that they can reuse common driver setup like pinctrl from drivers/base/pinctrl.c and clocks. This solution works much better and would make pwrseq to reuse all the driver setup done in the common code. Changes since v3: - Add error handling for try_module_get failures, suggested by Ulf. Changes since v2: All changes suggested by Ulf - Moved all the allocations/gpio_get/clk_get to probe - Removed alloc and free callbacks - try_get_module inside a mutex - Fixed Kconfigs - renamed list to pwrseq_node - add mssing pdev_set_drvdata() Changes since v1: - Fixed issue while building as module. Changes since RFC: - Fixed issues reported by kbuild test robot. - return EPROBE_DEFER from *_alloc() suggested by Ulf. Thanks, srini Srinivas Kandagatla (3): mmc: pwrseq_simple: add to_pwrseq_simple() macro mmc: pwrseq_emmc: add to_pwrseq_emmc() macro mmc: pwrseq: convert to proper platform device drivers/mmc/core/Kconfig | 21 ++++++++ drivers/mmc/core/Makefile | 4 +- drivers/mmc/core/pwrseq.c | 108 ++++++++++++++++++--------------------- drivers/mmc/core/pwrseq.h | 19 ++++--- drivers/mmc/core/pwrseq_emmc.c | 81 ++++++++++++++++++----------- drivers/mmc/core/pwrseq_simple.c | 91 ++++++++++++++++++--------------- 6 files changed, 185 insertions(+), 139 deletions(-) -- 2.5.0 -- To unsubscribe from this list: send the line "unsubscribe linux-mmc" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
