On Tue, 2016-04-12 at 14:55 +0200, Geert Uytterhoeven wrote:
> On Fri, Apr 1, 2016 at 5:44 PM, Wolfram Sang <wsa@xxxxxxxxxxxxx> wrote:
> > From: Ben Hutchings <ben.hutchings@xxxxxxxxxxxxxxx>
> >
> > Currently tmio_mmc assumes that the input clock frequency is fixed and
> > only its own clock divider can be changed. This is not true in the
> > case of sh_mobile_sdhi; we can use the clock API to change it.
> >
> > In tmio_mmc:
> > - Delegate setting of f_min from tmio to the clk_enable operation (if
> > implemented), as it can be smaller than f_max / 512
> > - Add an optional clk_update operation called from tmio_mmc_set_clock()
> > that updates the input clock frequency
> > - Rename tmio_mmc_clk_update() to tmio_mmc_clk_enable(), to avoid
> > confusion with the clk_update operation
> >
> > In sh_mobile_sdhi:
> > - Make the setting of f_max conditional; it should be set through the
> > max-frequency property in the device tree in future
> > - Set f_min based on the input clock's minimum frequency
> > - Implement the clk_update operation, selecting the best input clock
> > frequency for the bus frequency that's wanted
> >
> > sh_mobile_sdhi_clk_update() is loosely based on Kuninori Morimoto's work
> > in sh_mmcif.
> >
> > Signed-off-by: Ben Hutchings <ben.hutchings@xxxxxxxxxxxxxxx>
> > Signed-off-by: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx>
>
> This is now commit 2e21101df4fe8bdc ("mmc: tmio, sh_mobile_sdhi: Add support
> for variable input clock frequency") in the next branch of Ulf's mmc.git.
>
> 1. The SDHI/MMC clocks now run much slower than before. Perhaps this is
> intentional, and a consequence of finding the best way to drive the SD
> card at the target frequency?
I don't think is generally a problem. Probably even saves a little
power.
> 2. On r8a7740, the situation is worse: the HP ("High-speed Peripheral")
> clock is also scaled down from 99 MHz to 12.375 MHz.
> As the HP clock is the parent of lots of on-chip devices, this may affect
> performance for all of them.
>
> On r8a73a4, r8a7791, and sh73a0, the SDHI clocks are children of the pll1_div2
> clocks, which are fixed.
> On r8a7740, the SDHI and MMC clocks are children of the HP clock,
> which is also scaled down, affecting all other siblings.
[...]
That seems like a bug in the clock driver. If it doesn't have
independent dividers for each clock client then it shouldn't allow any
client to change the frequency.
Ben.
--
Ben Hutchings
Software Developer, Codethink Ltd.
--
To unsubscribe from this list: send the line "unsubscribe linux-mmc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
