On 03/24/2016 05:12 PM, Krzysztof Kozlowski wrote:
> The buck9 regulator of S2MPS11 PMIC had incorrect maximum voltage -
> lower by 5 mV than specified by datasheet. This buck9 provides power to
> other regulators, including LDO13 and LDO19 which supply the MMC2 (SD
> card).
>
> When constraints were applied, the depending regulators were not
> providing enough power, leading to SD card detection errors:
> mmc1: card never left busy state
> mmc1: error -110 whilst initialising SD card
>
> Fixes: 86a2d2ac5e5d ("ARM: dts: Add dts file for Odroid XU3 board")
> Signed-off-by: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>
Tested-by: Jaehoon Chung <jh80.chung@xxxxxxxxxxx>
Best Regards,
Jaehoon Chung
>
> ---
>
> The issue can be reproduced on next-20160324 with
> bae4fdc88d7f7dda1 (regulator: core: Ensure we are at least in bounds for our constraints).
> ---
> arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi | 2 +-
> 1 file changed, 1 insertion(+), 1 deletion(-)
>
> diff --git a/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi b/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi
> index 1bd507bfa750..82b2ba632cf6 100644
> --- a/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi
> +++ b/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi
> @@ -299,7 +299,7 @@
> buck9_reg: BUCK9 {
> regulator-name = "vdd_2.8v_ldo";
> regulator-min-microvolt = <3000000>;
> - regulator-max-microvolt = <3750000>;
> + regulator-max-microvolt = <3755000>;
> regulator-always-on;
> regulator-boot-on;
> };
>
--
To unsubscribe from this list: send the line "unsubscribe linux-mmc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
