Re: [PATCH v6 2/2] mmc: sdhci-of-arasan: add phy support for sdhci-of-arasan

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 07/03/16 14:48, Shawn Lin wrote:
> 在 2016/3/7 20:07, Adrian Hunter 写道:
>> On 05/03/16 04:24, Shawn Lin wrote:
>>> This patch adds Generic PHY access for sdhci-of-arasan. Driver
>>> can get PHY handler from dt-binding, and power-on/init the PHY.
>>> Currently, it's just mandatory for arasan,sdhci-5.1.
>>>
>>> Signed-off-by: Shawn Lin <shawn.lin@xxxxxxxxxxxxxx>
>>>
>>> Serise-changes: 6
>>> - rebase on Ulf's next
>>> - fix some preexisting problems of err handling suggested
>>>    by Adrian
>>>
>>> Serise-changes: 5
>>> - remove rpm support from this serise
>>> - fix some err case for handling phy
>>>
>>> Serise-changes: 4
>>> - remove suspend/resume_phy
>>> - add err handle label for system PM callback
>>> - fix comments of struct sdhci_arasan_data and system PM
>>>    callback suggested by Michal
>>>
>>> Serise-changes: 3
>>> - remove phy_init/exit for suspend/resume
>>> - adjust phy_int/power_on seq to make code more reasonable
>>>    simplify suspend/resume_phy
>>>
>>> Serise-changes: 2
>>> - Keep phy as a mandatory requirement for arasan,sdhci-5.1
>>>
>>
>>
>> It looks good, but, sorry to be a pain, the fixes to the error handling
>> really have to be separate patches.  I would make a separate patch for
>> removing clk_disable(sdhci_arasan->clk_ahb) from sdhci_arasan_resume() and
>> another for the error handling fixes in sdhci_arasan_probe().
> 
> Thanks. Does that mean you will split these two changes out of this
> single patch by youself? :)

You need to do it.  I am just Ack/Nack'ing at the moment.

> 
>>
>> By the way, those "Serise-changes" should not be in the commit msg.
> 
> My fault, sorry for forgeting to check the format after generating it by
> patman.py
> 
>>
>>> ---
>>>
>>> Changes in v6: None
>>> Changes in v2: None
>>>
>>>   drivers/mmc/host/sdhci-of-arasan.c | 71
>>> +++++++++++++++++++++++++++++++++-----
>>>   1 file changed, 63 insertions(+), 8 deletions(-)
>>>
>>> diff --git a/drivers/mmc/host/sdhci-of-arasan.c
>>> b/drivers/mmc/host/sdhci-of-arasan.c
>>> index 1e4b5e0..2e482b1 100644
>>> --- a/drivers/mmc/host/sdhci-of-arasan.c
>>> +++ b/drivers/mmc/host/sdhci-of-arasan.c
>>> @@ -21,6 +21,7 @@
>>>
>>>   #include <linux/module.h>
>>>   #include <linux/of_device.h>
>>> +#include <linux/phy/phy.h>
>>>   #include "sdhci-pltfm.h"
>>>
>>>   #define SDHCI_ARASAN_CLK_CTRL_OFFSET    0x2c
>>> @@ -32,9 +33,11 @@
>>>   /**
>>>    * struct sdhci_arasan_data
>>>    * @clk_ahb:    Pointer to the AHB clock
>>> + * @phy: Pointer to the generic phy
>>>    */
>>>   struct sdhci_arasan_data {
>>>       struct clk    *clk_ahb;
>>> +    struct phy    *phy;
>>>   };
>>>
>>>   static unsigned int sdhci_arasan_get_timeout_clock(struct sdhci_host
>>> *host)
>>> @@ -88,6 +91,15 @@ static int sdhci_arasan_suspend(struct device *dev)
>>>       if (ret)
>>>           return ret;
>>>
>>> +    if (!IS_ERR(sdhci_arasan->phy)) {
>>> +        ret = phy_power_off(sdhci_arasan->phy);
>>> +        if (ret) {
>>> +            dev_err(dev, "Cannot power off phy.\n");
>>> +            sdhci_resume_host(host);
>>> +            return ret;
>>> +        }
>>> +    }
>>> +
>>>       clk_disable(pltfm_host->clk);
>>>       clk_disable(sdhci_arasan->clk_ahb);
>>>
>>> @@ -118,10 +130,17 @@ static int sdhci_arasan_resume(struct device *dev)
>>>       ret = clk_enable(pltfm_host->clk);
>>>       if (ret) {
>>>           dev_err(dev, "Cannot enable SD clock.\n");
>>> -        clk_disable(sdhci_arasan->clk_ahb);
>>>           return ret;
>>>       }
>>>
>>> +    if (!IS_ERR(sdhci_arasan->phy)) {
>>> +        ret = phy_power_on(sdhci_arasan->phy);
>>> +        if (ret) {
>>> +            dev_err(dev, "Cannot power on phy.\n");
>>> +            return ret;
>>> +        }
>>> +    }
>>> +
>>>       return sdhci_resume_host(host);
>>>   }
>>>   #endif /* ! CONFIG_PM_SLEEP */
>>> @@ -148,19 +167,21 @@ static int sdhci_arasan_probe(struct
>>> platform_device *pdev)
>>>       sdhci_arasan->clk_ahb = devm_clk_get(&pdev->dev, "clk_ahb");
>>>       if (IS_ERR(sdhci_arasan->clk_ahb)) {
>>>           dev_err(&pdev->dev, "clk_ahb clock not found.\n");
>>> -        return PTR_ERR(sdhci_arasan->clk_ahb);
>>> +        ret = PTR_ERR(sdhci_arasan->clk_ahb);
>>> +        goto err_pltfm_free;
>>>       }
>>>
>>>       clk_xin = devm_clk_get(&pdev->dev, "clk_xin");
>>>       if (IS_ERR(clk_xin)) {
>>>           dev_err(&pdev->dev, "clk_xin clock not found.\n");
>>> -        return PTR_ERR(clk_xin);
>>> +        ret = PTR_ERR(clk_xin);
>>> +        goto err_pltfm_free;
>>>       }
>>>
>>>       ret = clk_prepare_enable(sdhci_arasan->clk_ahb);
>>>       if (ret) {
>>>           dev_err(&pdev->dev, "Unable to enable AHB clock.\n");
>>> -        return ret;
>>> +        goto err_pltfm_free;
>>>       }
>>>
>>>       ret = clk_prepare_enable(clk_xin);
>>> @@ -178,19 +199,48 @@ static int sdhci_arasan_probe(struct
>>> platform_device *pdev)
>>>           goto clk_disable_all;
>>>       }
>>>
>>> +    sdhci_arasan->phy = ERR_PTR(-ENODEV);
>>> +    if (of_device_is_compatible(pdev->dev.of_node,
>>> +                    "arasan,sdhci-5.1")) {
>>> +        sdhci_arasan->phy = devm_phy_get(&pdev->dev,
>>> +                         "phy_arasan");
>>> +        if (IS_ERR(sdhci_arasan->phy)) {
>>> +            ret = PTR_ERR(sdhci_arasan->phy);
>>> +            dev_err(&pdev->dev, "No phy for arasan,sdhci-5.1.\n");
>>> +            goto clk_disable_all;
>>> +        }
>>> +
>>> +        ret = phy_init(sdhci_arasan->phy);
>>> +        if (ret < 0) {
>>> +            dev_err(&pdev->dev, "phy_init err.\n");
>>> +            goto clk_disable_all;
>>> +        }
>>> +
>>> +        ret = phy_power_on(sdhci_arasan->phy);
>>> +        if (ret < 0) {
>>> +            dev_err(&pdev->dev, "phy_power_on err.\n");
>>> +            goto err_phy_power;
>>> +        }
>>> +    }
>>> +
>>>       ret = sdhci_add_host(host);
>>>       if (ret)
>>> -        goto err_pltfm_free;
>>> +        goto err_add_host;
>>>
>>>       return 0;
>>>
>>> -err_pltfm_free:
>>> -    sdhci_pltfm_free(pdev);
>>> +err_add_host:
>>> +    if (!IS_ERR(sdhci_arasan->phy))
>>> +        phy_power_off(sdhci_arasan->phy);
>>> +err_phy_power:
>>> +    if (!IS_ERR(sdhci_arasan->phy))
>>> +        phy_exit(sdhci_arasan->phy);
>>>   clk_disable_all:
>>>       clk_disable_unprepare(clk_xin);
>>>   clk_dis_ahb:
>>>       clk_disable_unprepare(sdhci_arasan->clk_ahb);
>>> -
>>> +err_pltfm_free:
>>> +    sdhci_pltfm_free(pdev);
>>>       return ret;
>>>   }
>>>
>>> @@ -202,6 +252,11 @@ static int sdhci_arasan_remove(struct
>>> platform_device *pdev)
>>>       struct sdhci_arasan_data *sdhci_arasan = sdhci_pltfm_priv(pltfm_host);
>>>       struct clk *clk_ahb = sdhci_arasan->clk_ahb;
>>>
>>> +    if (!IS_ERR(sdhci_arasan->phy)) {
>>> +        phy_power_off(sdhci_arasan->phy);
>>> +        phy_exit(sdhci_arasan->phy);
>>> +    }
>>> +
>>>       ret = sdhci_pltfm_unregister(pdev);
>>>
>>>       clk_disable_unprepare(clk_ahb);
>>>
>>
>>
>>
>>
> 
> 

--
To unsubscribe from this list: send the line "unsubscribe linux-mmc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Linux USB Devel]     [Linux Media]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux