Re: [PATCH 2/2] mmc: mediatek: Use mmc_regulator_set_vqmmc in start_signal_voltage_switch

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 3 March 2016 at 11:19, Nicolas Boichat <drinkcat@xxxxxxxxxxxx> wrote:
> We've introduced a new helper in the MMC core:
> mmc_regulator_set_vqmmc().  Let's use this in mtk-sd.  Using this new
> helper has some advantages:
>
>     1. We get the mmc_regulator_set_vqmmc() behavior of trying to match
>        VQMMC and VMMC when the signal voltage is 3.3V.  This ensures max
>        compatibility.
>
>     2. We get rid of a few more warnings when probing unsupported
>        voltages.
>
>     3. We get rid of some non-mediatek specific code in mtk-sd.
>
> Signed-off-by: Nicolas Boichat <drinkcat@xxxxxxxxxxxx>

Thanks, applied for next!

Kind regards
Uffe

> ---
>
> Similar to e0848f5d294c703917260a6228cc08b8be46c527
> mmc: dw_mmc: Use mmc_regulator_set_vqmmc in start_signal_voltage_switch ,
> where I copied the commit message from.
>
>  drivers/mmc/host/mtk-sd.c | 17 +++++------------
>  1 file changed, 5 insertions(+), 12 deletions(-)
>
> diff --git a/drivers/mmc/host/mtk-sd.c b/drivers/mmc/host/mtk-sd.c
> index 07809f4..b17f30d 100644
> --- a/drivers/mmc/host/mtk-sd.c
> +++ b/drivers/mmc/host/mtk-sd.c
> @@ -1021,26 +1021,19 @@ static void msdc_set_buswidth(struct msdc_host *host, u32 width)
>  static int msdc_ops_switch_volt(struct mmc_host *mmc, struct mmc_ios *ios)
>  {
>         struct msdc_host *host = mmc_priv(mmc);
> -       int min_uv, max_uv;
>         int ret = 0;
>
>         if (!IS_ERR(mmc->supply.vqmmc)) {
> -               if (ios->signal_voltage == MMC_SIGNAL_VOLTAGE_330) {
> -                       min_uv = 3300000;
> -                       max_uv = 3300000;
> -               } else if (ios->signal_voltage == MMC_SIGNAL_VOLTAGE_180) {
> -                       min_uv = 1800000;
> -                       max_uv = 1800000;
> -               } else {
> +               if (ios->signal_voltage != MMC_SIGNAL_VOLTAGE_330 &&
> +                   ios->signal_voltage != MMC_SIGNAL_VOLTAGE_180) {
>                         dev_err(host->dev, "Unsupported signal voltage!\n");
>                         return -EINVAL;
>                 }
>
> -               ret = regulator_set_voltage(mmc->supply.vqmmc, min_uv, max_uv);
> +               ret = mmc_regulator_set_vqmmc(mmc, ios);
>                 if (ret) {
> -                       dev_dbg(host->dev,
> -                                       "Regulator set error %d: %d - %d\n",
> -                                       ret, min_uv, max_uv);
> +                       dev_dbg(host->dev, "Regulator set error %d (%d)\n",
> +                               ret, ios->signal_voltage);
>                 } else {
>                         /* Apply different pinctrl settings for different signal voltage */
>                         if (ios->signal_voltage == MMC_SIGNAL_VOLTAGE_180)
> --
> 2.7.0.rc3.207.g0ac5344
>
--
To unsubscribe from this list: send the line "unsubscribe linux-mmc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Linux USB Devel]     [Linux Media]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux