Enhanced strobe stuff currently is beyond the scope
of Secure Digital Host Controller Interface. So we can't
find a register here to enable/disable it. We experct
variant drivers to finish the details according to their
vendor settings.
Signed-off-by: Shawn Lin <shawn.lin@xxxxxxxxxxxxxx>
---
drivers/mmc/host/sdhci.c | 11 +++++++++++
1 file changed, 11 insertions(+)
diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c
index 03fbb36..61a1af1 100644
--- a/drivers/mmc/host/sdhci.c
+++ b/drivers/mmc/host/sdhci.c
@@ -2007,6 +2007,16 @@ out_unlock:
return err;
}
+static int sdhci_prepare_enhanced_strobe(struct mmc_host *mmc, bool enable)
+{
+ /*
+ * Currently we can't find a register to enable enhanced strobe
+ * function for standard sdhci, so we expect variant drivers to
+ * overwrite it.
+ */
+ return -EINVAL;
+}
+
static int sdhci_select_drive_strength(struct mmc_card *card,
unsigned int max_dtr, int host_drv,
int card_drv, int *drv_type)
@@ -2116,6 +2126,7 @@ static const struct mmc_host_ops sdhci_ops = {
.enable_sdio_irq = sdhci_enable_sdio_irq,
.start_signal_voltage_switch = sdhci_start_signal_voltage_switch,
.prepare_hs400_tuning = sdhci_prepare_hs400_tuning,
+ .prepare_enhanced_strobe = sdhci_prepare_enhanced_strobe,
.execute_tuning = sdhci_execute_tuning,
.select_drive_strength = sdhci_select_drive_strength,
.card_event = sdhci_card_event,
--
2.3.7
--
To unsubscribe from this list: send the line "unsubscribe linux-mmc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
