If a driver PM runtime is disabled via sysfs, and the module is
unloaded, PM runtime can't do anything to disable the device. Let's
let the interconnect disable the device on BUS_NOTIFY_UNBOUND_DRIVER.
Otherwise omap_device will produce and error on the following module
reload. This can be easily tested with something like:
# modprobe omap_hsmmc
# echo on > /sys/devices/platform/68000000.ocp/4809c000.mmc/power/control
# rmmod omap_hsmmc
# modprobe omap_hsmmc
Cc: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
Cc: Kevin Hilman <khilman@xxxxxxxxxxxx>
Cc: Nishanth Menon <nm@xxxxxx>
Cc: Rafael J. Wysocki <rafael@xxxxxxxxxx>
Cc: Tero Kristo <t-kristo@xxxxxx>
Reported-by: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
Signed-off-by: Tony Lindgren <tony@xxxxxxxxxxx>
---
arch/arm/mach-omap2/omap_device.c | 10 ++++++++++
1 file changed, 10 insertions(+)
diff --git a/arch/arm/mach-omap2/omap_device.c b/arch/arm/mach-omap2/omap_device.c
index ebd8369..f7ff3b9 100644
--- a/arch/arm/mach-omap2/omap_device.c
+++ b/arch/arm/mach-omap2/omap_device.c
@@ -191,12 +191,22 @@ static int _omap_device_notifier_call(struct notifier_block *nb,
{
struct platform_device *pdev = to_platform_device(dev);
struct omap_device *od;
+ int err;
switch (event) {
case BUS_NOTIFY_DEL_DEVICE:
if (pdev->archdata.od)
omap_device_delete(pdev->archdata.od);
break;
+ case BUS_NOTIFY_UNBOUND_DRIVER:
+ od = to_omap_device(pdev);
+ if (od && (od->_state == OMAP_DEVICE_STATE_ENABLED)) {
+ dev_info(dev, "enabled after unload, idling\n");
+ err = omap_device_idle(pdev);
+ if (err)
+ dev_err(dev, "failed to idle\n");
+ }
+ break;
case BUS_NOTIFY_ADD_DEVICE:
if (pdev->dev.of_node)
omap_device_build_from_dt(pdev);
--
2.7.0
--
To unsubscribe from this list: send the line "unsubscribe linux-mmc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
