Re: [RFC PATCH 0/21] Totally remove SDHCI_QUIRK_BROKEN_CARD_DETECTION quirk

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 29/01/16 19:28, Russell King - ARM Linux wrote:
> On Fri, Jan 29, 2016 at 02:08:21PM +0200, Adrian Hunter wrote:
>> I might make a tree because I want to try to separate Russell's bug fixes
>> from the clean-ups, and then cc stable on the bug fixes.
> 
> It would be good if you could ask for that, I'll look at rearranging
> (and re-testing) the patches to achieve that.  Had I known that, I
> could've done it before posting the latest set of patches.

If you don't mind doing that, that would be great!

So far the fixes, I have identified:

1. mmc: sdhci: command response CRC error handling

Could have "fix" in the subject i.e. "fix command response CRC error handling".

Could change to be dependent only on "mmc: sdhci: move initialisation of
command error member".  Also I would treat end-bit and index errors the same
as CRC errors i.e. probably end up with:

diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c
index d622435d1bcc..6cae93a89eba 100644
--- a/drivers/mmc/host/sdhci.c
+++ b/drivers/mmc/host/sdhci.c
@@ -2325,8 +2325,23 @@ static void sdhci_cmd_irq(struct sdhci_host *host,
u32 intmask, u32 *mask)
 	if (intmask & SDHCI_INT_TIMEOUT)
 		host->cmd->error = -ETIMEDOUT;
 	else if (intmask & (SDHCI_INT_CRC | SDHCI_INT_END_BIT |
-			SDHCI_INT_INDEX))
+			SDHCI_INT_INDEX)) {
 		host->cmd->error = -EILSEQ;
+		/*
+		 * If this command initiates a data phase and a response
+		 * CRC error is signalled, the card can start transferring
+		 * data - the card may have received the command without
+		 * error.  We must not terminate the mmc_request early.
+		 *
+		 * If the card did not receive the command or returned an
+		 * error which prevented it sending data, the data phase
+		 * will time out.
+		 */
+		if (host->cmd->data) {
+			host->cmd = NULL;
+			return;
+		}
+	}

 	if (host->cmd->error) {
 		tasklet_schedule(&host->finish_tasklet);

2. mmc: sdhci: avoid unnecessary mapping/unmapping of align buffer

This looks like a bug fix because the mapping can be leaked on the error
path i.e. similar problem to the one fixed by "mmc: sdhci: plug DMA mapping
leak on error"

3. mmc: sdhci: plug DMA mapping leak on error

It looks like the 2nd chunk could be taken as a separate fix without
dependence on other patches.

4. mmc: sdhci-pxav3: fix higher speed mode capabilities

I can't test this so please indicate if you want it for stable.

5. mmc: sdhci: further fix for DMA unmapping in sdhci_post_req()

Could be made independent of other patches.

6. mmc: sdhci: fix data timeout (part 1)
mmc: sdhci: fix data timeout (part 2)

Could be just 1 patch.


--
To unsubscribe from this list: send the line "unsubscribe linux-mmc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Linux USB Devel]     [Linux Media]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux