Hi,
> Ulf Hansson <ulf.hansson@xxxxxxxxxx> hat am 27. Januar 2016 um 15:16
> geschrieben:
>
>
> On 17 January 2016 at 15:59, Stefan Wahren <stefan.wahren@xxxxxxxx> wrote:
> > The RPi firmware-based clocks driver can actually disable
> > unused clocks, so when switching to use it we ended up losing
> > our MMC clock once all devices were probed.
> >
> > This patch adopts the changes from 1e5a0a9a58e2 ("mmc: sdhci-bcm2835:
> > Actually enable the clock") to sdhci-iproc.
> >
> > Signed-off-by: Stefan Wahren <stefan.wahren@xxxxxxxx>
> > ---
> > drivers/mmc/host/sdhci-iproc.c | 9 ++++++++-
> > 1 file changed, 8 insertions(+), 1 deletion(-)
> >
> > diff --git a/drivers/mmc/host/sdhci-iproc.c b/drivers/mmc/host/sdhci-iproc.c
> > index e22060a..55bc348 100644
> > --- a/drivers/mmc/host/sdhci-iproc.c
> > +++ b/drivers/mmc/host/sdhci-iproc.c
> > @@ -207,6 +207,11 @@ static int sdhci_iproc_probe(struct platform_device
> > *pdev)
> > ret = PTR_ERR(pltfm_host->clk);
> > goto err;
> > }
> > + ret = clk_prepare_enable(pltfm_host->clk);
> > + if (ret) {
> > + dev_err(&pdev->dev, "failed to enable host clk\n");
> > + goto err;
> > + }
> >
> > if (iproc_host->data->pdata->quirks & SDHCI_QUIRK_MISSING_CAPS) {
> > host->caps = iproc_host->data->caps;
> > @@ -215,10 +220,12 @@ static int sdhci_iproc_probe(struct platform_device
> > *pdev)
> >
> > ret = sdhci_add_host(host);
> > if (ret)
> > - goto err;
> > + goto err_clk;
> >
> > return 0;
> >
> > +err_clk:
> > + clk_disable_unprepare(pltfm_host->clk);
> > err:
> > sdhci_pltfm_free(pdev);
> > return ret;
> > --
> > 1.7.9.5
> >
>
> There's a missing clk_disable_unprepare() from the ->remove()
> callback. Otherwise this looks good.
this shouldn't be necessary, because clk_disable_unprepare() is already called
by sdhci_pltfm_unregister().
Regards
Stefan
>
> Kind regards
> Uffe
--
To unsubscribe from this list: send the line "unsubscribe linux-mmc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
