On 01/17/2016 07:59 AM, Stefan Wahren wrote:
> Scott Branden from Broadcom said that the BCM2835 eMMC IP core is
> very similar to IPROC and share most of the quirks. So use this driver
> instead of separate one.
>
> The sdhci-iproc contains a better workaround for the clock domain
> crossing problem which doesn't need any delays. This results in a
> better write performance.
>
> Btw we get the rid of the SDHCI_CAPABILITIES hack in the sdhci_readl
> function.
> diff --git a/drivers/mmc/host/sdhci-iproc.c b/drivers/mmc/host/sdhci-iproc.c
> +static const struct sdhci_pltfm_data sdhci_bcm2835_pltfm_data = {
> + .quirks = SDHCI_QUIRK_DATA_TIMEOUT_USES_SDCLK
> + | SDHCI_QUIRK_MISSING_CAPS,
> + .ops = &sdhci_iproc_ops,
> +};
> +
> +static const struct sdhci_iproc_data bcm2835_data = {
> + .pdata = &sdhci_bcm2835_pltfm_data,
> + .caps = SDHCI_CAN_VDD_330,
> + .caps1 = 0x00000000,
> +};
> @@ -199,8 +213,10 @@ static int sdhci_iproc_probe(struct platform_device *pdev)
> - /* Enable EMMC 1/8V DDR capable */
> - host->mmc->caps |= MMC_CAP_1_8V_DDR;
> + if (of_device_is_compatible(np, "brcm,sdhci-iproc-cygnus")) {
> + /* Enable EMMC 1/8V DDR capable */
> + host->mmc->caps |= MMC_CAP_1_8V_DDR;
> + }
Rather that placing device-specific of_device_is_compatible() throughout
the driver, I think it'd be better to key off a field in bcm2835_data or
sdhci_bcm2835_pltfm_data. That way, if the driver starts supporting
additional devices that want this MMC_CAP_1_8V_DDR, you can simply set
that up in the relevant data structure, rather than adding a mess of
of_device_is_compatible("a") || of_device_is_compatible("b") || ... to
the code.
--
To unsubscribe from this list: send the line "unsubscribe linux-mmc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
