From: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx> Rcar2 & 3 docs state that for going to and coming from the 0xff setting, the clock must first be disabled before the DIV bits are changed. Instead of tracking this, let's just do this unconditionally. Signed-off-by: Wolfram Sang <wsa+renesas@xxxxxxxxxxxxxxxxxxxx> --- drivers/mmc/host/tmio_mmc_pio.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/mmc/host/tmio_mmc_pio.c b/drivers/mmc/host/tmio_mmc_pio.c index 7f6b5adf12094b..03f6e74c190691 100644 --- a/drivers/mmc/host/tmio_mmc_pio.c +++ b/drivers/mmc/host/tmio_mmc_pio.c @@ -174,6 +174,8 @@ static void tmio_mmc_set_clock(struct tmio_mmc_host *host, if (host->set_clk_div) host->set_clk_div(host->pdev, (clk >> 22) & 1); + sd_ctrl_write16(host, CTL_SD_CARD_CLK_CTL, ~CLK_CTL_SCLKEN & + sd_ctrl_read16(host, CTL_SD_CARD_CLK_CTL)); sd_ctrl_write16(host, CTL_SD_CARD_CLK_CTL, clk & CLK_CTL_DIV_MASK); if (!(host->pdata->flags & TMIO_MMC_FAST_CLK_CHG)) msleep(10); -- 2.1.4 -- To unsubscribe from this list: send the line "unsubscribe linux-mmc" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
