Hi,
On 21-01-16 06:26, Chen-Yu Tsai wrote:
According to Allwinner, only mmc3 supports 8 bit DDR transfers for eMMC.
Switch to mmc3 for the onboard eMMC, and also assign vqmmc for signal
voltage sensing/switching, and "cap-mmc-hw-reset" to denote this
instance can use eMMC hardware reset.
This is going to need some more explanation, does this mean
that the old dtsi is wrong and the emmc does not work there are all ?
Regards,
Hans
Signed-off-by: Chen-Yu Tsai <wens@xxxxxxxx>
---
arch/arm/boot/dts/sun6i-a31s-sina31s-core.dtsi | 6 ++++--
1 file changed, 4 insertions(+), 2 deletions(-)
diff --git a/arch/arm/boot/dts/sun6i-a31s-sina31s-core.dtsi b/arch/arm/boot/dts/sun6i-a31s-sina31s-core.dtsi
index ea69fb8ad4d8..4ec0c8679b2e 100644
--- a/arch/arm/boot/dts/sun6i-a31s-sina31s-core.dtsi
+++ b/arch/arm/boot/dts/sun6i-a31s-sina31s-core.dtsi
@@ -61,12 +61,14 @@
};
/* eMMC on core board */
-&mmc2 {
+&mmc3 {
pinctrl-names = "default";
- pinctrl-0 = <&mmc2_8bit_emmc_pins>;
+ pinctrl-0 = <&mmc3_8bit_emmc_pins>;
vmmc-supply = <®_dcdc1>;
+ vqmmc-supply = <®_dcdc1>;
bus-width = <8>;
non-removable;
+ cap-mmc-hw-reset;
status = "okay";
};
--
To unsubscribe from this list: send the line "unsubscribe linux-mmc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
