Re: [PATCHv2 4/5] mmc: shdci-bcm2835: add verify for 32-bit back-to-back workaround

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Stefan,

On 15-12-22 07:55 AM, Stefan Wahren wrote:
Hi Scott,

Am 07.11.2014 um 19:31 schrieb Scott Branden:
On 14-11-05 09:01 PM, Stephen Warren wrote:
On 11/05/2014 12:00 AM, Scott Branden wrote:
On 14-11-04 08:59 PM, Stephen Warren wrote:
On 10/30/2014 12:36 AM, Scott Branden wrote:
Add a verify option to driver to print out an error message if a
potential back to back write could cause a clock domain issue.
index f8c450a..11af27f 100644
+#ifdef CONFIG_MMC_SDHCI_BCM2835_VERIFY_WORKAROUND
+    struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
+    struct bcm2835_sdhci_host *bcm2835_host = pltfm_host->priv;
+
+    if (bcm2835_host->previous_reg == reg) {
+        if ((reg != SDHCI_HOST_CONTROL)
+            && (reg != SDHCI_CLOCK_CONTROL)) {
The comment in patch 3 says the problem doesn't apply to the data
register. Why does this check for these two registers rather than data?
This Verify workaround patch still a work in progress.  I'm still
getting more info from the silicon designers on the back-to-back
register writes that are affect.  The spew of 0x20 or 0x28 or 0x2c
register writes are all ok locations that don't need to be worked
around.  This patch needs to be corrected with the proper register rules
still.
Thanks for testing.  Yes, I have work to do on the verify patch above
still.
do you still have plans to submit a V3 of this patch series?
No, I do not have plans to submit a V3 of this patch series.

I submitted this patch as RPI has a similar controller to the SoCs I am familiar with as well as needing similar work arounds You can take over the patchset. Or, try and get the sdhci-iproc.c driver going on RPI. The sdhci-iproc is the production driver we use on a variety of SoCs and support and test this driver.
I attached an improved version of this patch which avoids a possible
endless loop caused by the dev_err call. So only the first occurence
of a specific register will be logged.
OK, but is this really necessary? If veryify workaround ever prints anything then the driver workarounds aren't doing what it is supposed to anyway?
Regards
Stefan


-------------------8<-------------------------------------------

diff --git a/drivers/mmc/host/Kconfig b/drivers/mmc/host/Kconfig
index 1526b8a..7b0990f 100644
--- a/drivers/mmc/host/Kconfig
+++ b/drivers/mmc/host/Kconfig
@@ -306,6 +306,15 @@ config MMC_SDHCI_BCM2835

  	  If unsure, say N.

+config MMC_SDHCI_BCM2835_VERIFY_WORKAROUND
+	bool "Verify BCM2835 workaround does not do back to back writes"
+	depends on MMC_SDHCI_BCM2835
+	default y
+	help
+	  This enables code that verifies the bcm2835 workaround.
+	  The verification code checks that back to back writes to the same
+	  register do not occur.
+
  config MMC_SDHCI_F_SDH30
  	tristate "SDHCI support for Fujitsu Semiconductor F_SDH30"
  	depends on MMC_SDHCI_PLTFM
diff --git a/drivers/mmc/host/sdhci-bcm2835.c
b/drivers/mmc/host/sdhci-bcm2835.c
index 01ce193d..c1c70df 100644
--- a/drivers/mmc/host/sdhci-bcm2835.c
+++ b/drivers/mmc/host/sdhci-bcm2835.c
@@ -20,15 +20,27 @@
   */

  #include <linux/delay.h>
+#include <linux/hashtable.h>
  #include <linux/module.h>
  #include <linux/mmc/host.h>
+#include <linux/slab.h>
  #include "sdhci-pltfm.h"

  struct bcm2835_sdhci_host {
  	u32 shadow_cmd;
  	u32 shadow_blk;
+	int previous_reg;
  };

+struct reg_hash {
+	struct hlist_node node;
+	int reg;
+};
+
+#define BCM2835_REG_HT_BITS 4
+
+static DEFINE_HASHTABLE(bcm2835_used_regs, BCM2835_REG_HT_BITS);
+
  #define REG_OFFSET_IN_BITS(reg) ((reg) << 3 & 0x18)

  static inline u32 bcm2835_sdhci_readl(struct sdhci_host *host, int reg)
@@ -56,8 +68,37 @@ static u8 bcm2835_sdhci_readb(struct sdhci_host
*host, int reg)
  }

  static inline void bcm2835_sdhci_writel(struct sdhci_host *host,
+					u32 val, int reg)
+{
+	writel(val, host->ioaddr + reg);
+}
+
+static inline void bcm2835_sdhci_writel_verify(struct sdhci_host *host,
  						u32 val, int reg)
  {
+	struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
+	struct bcm2835_sdhci_host *bcm2835_host = pltfm_host->priv;
+	struct reg_hash *rh;
+	struct hlist_head *head;
+
+	head = &bcm2835_used_regs[hash_min(reg, BCM2835_REG_HT_BITS)];
+
+	if (bcm2835_host->previous_reg == reg) {
+		if ((reg != SDHCI_HOST_CONTROL) &&
+		    (reg != SDHCI_CLOCK_CONTROL) &&
+		    (hlist_empty(head))) {
+			rh = kzalloc(sizeof(*rh), GFP_KERNEL);
+			if (WARN_ON(!rh))
+				return;
+
+			rh->reg = reg;
+			hash_add(bcm2835_used_regs, &rh->node, rh->reg);
+			dev_err(mmc_dev(host->mmc), "back-to-back write to 0x%x\n",
+				reg);
+		}
+	}
+	bcm2835_host->previous_reg = reg;
+
  	writel(val, host->ioaddr + reg);
  }

@@ -131,7 +172,11 @@ static const struct sdhci_ops bcm2835_sdhci_ops = {
  	.read_l = bcm2835_sdhci_readl,
  	.read_w = bcm2835_sdhci_readw,
  	.read_b = bcm2835_sdhci_readb,
+#ifdef CONFIG_MMC_SDHCI_BCM2835_VERIFY_WORKAROUND
+	.write_l = bcm2835_sdhci_writel_verify,
+#else
  	.write_l = bcm2835_sdhci_writel,
+#endif
  	.write_w = bcm2835_sdhci_writew,
  	.write_b = bcm2835_sdhci_writeb,
  	.set_clock = sdhci_set_clock,




--
To unsubscribe from this list: send the line "unsubscribe linux-mmc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Linux USB Devel]     [Linux Media]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux