From: Carlo Caione <carlo@xxxxxxxxxxxx>
Add a driver for the SD/MMC host found on the Amlogic MesonX SoCs. This
is an MMC controller which provides an interface between the application
processor and various memory cards. It supports the SD specification
v2.0 and the eMMC specification v4.41.
This patch adds also the binding documentation.
Signed-off-by: Carlo Caione <carlo@xxxxxxxxxxxx>
---
Changelog:
v2:
* fix typo in commit message
* avoid the bounce buffer (max_segs == 1)
v3:
* simplify meson_mmc_map_dma() and fix memory leak
v4:
* code and documentation cleanup
* removed redundant variables
* removed useless printing
* introduced MMC_CAP2_NO_SDIO
* removed state machine
* better spinlocks management and positioning
---
.../devicetree/bindings/mmc/meson-mmc.txt | 29 ++
drivers/mmc/host/Kconfig | 7 +
drivers/mmc/host/Makefile | 1 +
drivers/mmc/host/meson-mmc.c | 527 +++++++++++++++++++++
4 files changed, 564 insertions(+)
create mode 100644 Documentation/devicetree/bindings/mmc/meson-mmc.txt
create mode 100644 drivers/mmc/host/meson-mmc.c
diff --git a/Documentation/devicetree/bindings/mmc/meson-mmc.txt b/Documentation/devicetree/bindings/mmc/meson-mmc.txt
new file mode 100644
index 0000000..7ff9e9e
--- /dev/null
+++ b/Documentation/devicetree/bindings/mmc/meson-mmc.txt
@@ -0,0 +1,29 @@
+* Amlogic MesonX MMC controller
+
+The highspeed MMC host controller on Amlogic SoCs provides an interface
+for MMC, SD, SDIO and SDHC types of memory cards.
+
+Supported maximum speeds are the ones of the eMMC standard 4.41 as well
+as the speed of SD standard 2.0.
+
+Required properties:
+ - compatible : "amlogic,meson-mmc"
+ - reg : mmc controller base registers
+ - interrupts : mmc controller interrupt
+ - clocks : phandle to clock provider
+ - pinctrl-names : should contain "sdio_a" or "sdio_b"
+ - pinctrl-0: Should specify pin control groups used for this controller
+
+Optional properties:
+ - for cd, bus-width and additional generic mmc parameters
+ please refer to mmc.txt within this directory
+
+Examples:
+ mmc0: mmc@c1108c20 {
+ pinctrl-names = "sdio_b";
+ pinctrl-0 = <&mmc0_sd_b_pins>;
+ compatible = "amlogic,meson-mmc";
+ reg = <0xc1108c20 0x20>;
+ interrupts = <0 28 1>;
+ clocks = <&clkc CLKID_CLK81>;
+ };
diff --git a/drivers/mmc/host/Kconfig b/drivers/mmc/host/Kconfig
index 1dee533..7f2c5ae 100644
--- a/drivers/mmc/host/Kconfig
+++ b/drivers/mmc/host/Kconfig
@@ -765,6 +765,13 @@ config MMC_REALTEK_USB
Say Y here to include driver code to support SD/MMC card interface
of Realtek RTS5129/39 series card reader
+config MMC_MESON
+ tristate "Amlogic MesonX SD/MMC Host Controller support"
+ depends on ARCH_MESON
+ help
+ This selects support for the SD/MMC Host Controller on
+ Amlogic MesonX SoCs.
+
config MMC_SUNXI
tristate "Allwinner sunxi SD/MMC Host Controller support"
depends on ARCH_SUNXI
diff --git a/drivers/mmc/host/Makefile b/drivers/mmc/host/Makefile
index 3595f83..26ddf76 100644
--- a/drivers/mmc/host/Makefile
+++ b/drivers/mmc/host/Makefile
@@ -54,6 +54,7 @@ obj-$(CONFIG_MMC_VUB300) += vub300.o
obj-$(CONFIG_MMC_USHC) += ushc.o
obj-$(CONFIG_MMC_WMT) += wmt-sdmmc.o
obj-$(CONFIG_MMC_MOXART) += moxart-mmc.o
+obj-$(CONFIG_MMC_MESON) += meson-mmc.o
obj-$(CONFIG_MMC_SUNXI) += sunxi-mmc.o
obj-$(CONFIG_MMC_USDHI6ROL0) += usdhi6rol0.o
obj-$(CONFIG_MMC_TOSHIBA_PCI) += toshsd.o
diff --git a/drivers/mmc/host/meson-mmc.c b/drivers/mmc/host/meson-mmc.c
new file mode 100644
index 0000000..6382470
--- /dev/null
+++ b/drivers/mmc/host/meson-mmc.c
@@ -0,0 +1,527 @@
+/*
+ * meson-mmc.c - Meson SDH Controller
+ *
+ * Copyright (C) 2015 Endless Mobile, Inc.
+ * Author: Carlo Caione <carlo@xxxxxxxxxxxx>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or (at
+ * your option) any later version.
+ */
+
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/dma-mapping.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/ioport.h>
+#include <linux/platform_device.h>
+
+#include <linux/mmc/host.h>
+#include <linux/mmc/mmc.h>
+#include <linux/mmc/sdio.h>
+#include <linux/mmc/slot-gpio.h>
+
+#include <linux/of_address.h>
+#include <linux/of_gpio.h>
+#include <linux/of_platform.h>
+
+#define SDIO_ARGU (0x00)
+#define SDIO_SEND (0x04)
+#define SDIO_CONF (0x08)
+#define SDIO_IRQS (0x0c)
+#define SDIO_IRQC (0x10)
+#define SDIO_MULT (0x14)
+#define SDIO_ADDR (0x18)
+#define SDIO_EXT (0x1c)
+
+#define REG_IRQS_RESP_CRC7 BIT(5)
+#define REG_IRQS_RD_CRC16 BIT(6)
+#define REG_IRQS_WR_CRC16 BIT(7)
+#define REG_IRQS_CMD_INT BIT(9)
+
+#define REG_IRQC_ARC_CMD_INT BIT(4)
+
+#define REG_CONF_CLK_DIV_M (0x3ff)
+#define REG_CONF_BUS_WIDTH BIT(20)
+
+#define REG_MULT_PORT_SEL_M (0x3)
+#define REG_MULT_RD_INDEX_M (0x0f)
+#define REG_MULT_RD_INDEX_S (12)
+#define REG_MULT_WR_RD_OUT_IND BIT(8)
+
+#define REG_SEND_CMD_COMMAND_M (0xff)
+#define REG_SEND_CMD_RESP_S (8)
+#define REG_SEND_RESP_NO_CRC7 BIT(16)
+#define REG_SEND_RESP_HAVE_DATA BIT(17)
+#define REG_SEND_RESP_CRC7_F_8 BIT(18)
+#define REG_SEND_CHECK_BUSY_D0 BIT(19)
+#define REG_SEND_CMD_SEND_DATA BIT(20)
+#define REG_SEND_REP_PACK_N_M (0xff)
+#define REG_SEND_REP_PACK_N_S (24)
+
+#define REG_EXT_DAT_RW_NUM_M (0x3fff)
+#define REG_EXT_DAT_RW_NUM_S (16)
+
+#define SDIO_BOUNCE_REQ_SIZE (128 * 1024)
+
+struct meson_mmc_host {
+ struct mmc_host *mmc;
+ struct mmc_request *mrq;
+ struct delayed_work timeout_work;
+ struct clk *clk;
+ spinlock_t lock;
+ void __iomem *base;
+ long timeout;
+ int irq;
+ int error;
+ unsigned int port;
+ bool cmd_is_stop;
+ bool dying;
+};
+
+static int meson_mmc_clk_set_rate(struct mmc_host *mmc, struct mmc_ios *ios)
+{
+ struct meson_mmc_host *host = mmc_priv(mmc);
+ unsigned long clk_rate;
+ unsigned int clk_ios = ios->clock;
+ unsigned int clk_div;
+ u32 conf_reg;
+
+ clk_rate = clk_get_rate(host->clk);
+ if (clk_rate < 0) {
+ dev_err(mmc_dev(mmc), "cannot get clock rate\n");
+ return -EINVAL;
+ }
+
+ clk_rate >>= 1;
+ clk_div = clk_rate / clk_ios - !(clk_rate % clk_ios);
+
+ conf_reg = readl(host->base + SDIO_CONF);
+ conf_reg &= ~REG_CONF_CLK_DIV_M;
+ conf_reg |= clk_div;
+ writel(conf_reg, host->base + SDIO_CONF);
+
+ dev_dbg(mmc_dev(mmc), "clk_ios: %d, clk_div: %d, clk_rate: %ld\n",
+ clk_ios, clk_div, clk_rate);
+
+ return 0;
+}
+
+static void meson_mmc_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
+{
+ struct meson_mmc_host *host = mmc_priv(mmc);
+ u32 reg;
+
+ reg = readl(host->base + SDIO_CONF);
+
+ switch (ios->bus_width) {
+ case MMC_BUS_WIDTH_1:
+ reg &= ~REG_CONF_BUS_WIDTH;
+ break;
+ case MMC_BUS_WIDTH_4:
+ reg |= REG_CONF_BUS_WIDTH;
+ break;
+ case MMC_BUS_WIDTH_8:
+ default:
+ dev_err(mmc_dev(mmc), "meson controller doesn't support 8bit data bus\n");
+ host->error = -EINVAL;
+ return;
+ }
+
+ writel(reg, host->base + SDIO_CONF);
+
+ if (ios->clock && ios->power_mode)
+ host->error = meson_mmc_clk_set_rate(mmc, ios);
+}
+
+static void meson_mmc_start_cmd(struct mmc_host *mmc,
+ struct mmc_command *cmd)
+{
+ struct meson_mmc_host *host = mmc_priv(mmc);
+ unsigned int pack_size;
+ u32 irqc, irqs, mult;
+ u32 send = 0;
+ u32 ext = 0;
+
+ switch (mmc_resp_type(cmd)) {
+ case MMC_RSP_R1:
+ case MMC_RSP_R1B:
+ case MMC_RSP_R3:
+ send |= (45 << REG_SEND_CMD_RESP_S);
+ break;
+ case MMC_RSP_R2:
+ send |= (133 << REG_SEND_CMD_RESP_S);
+ send |= REG_SEND_RESP_CRC7_F_8;
+ break;
+ default:
+ break;
+ }
+
+ if (!(cmd->flags & MMC_RSP_CRC))
+ send |= REG_SEND_RESP_NO_CRC7;
+
+ if (cmd->flags & MMC_RSP_BUSY)
+ send |= REG_SEND_CHECK_BUSY_D0;
+
+ if (cmd->data) {
+ send &= ~(REG_SEND_REP_PACK_N_M << REG_SEND_REP_PACK_N_S);
+ send |= ((cmd->data->blocks - 1) << REG_SEND_REP_PACK_N_S);
+
+ ext &= ~(REG_EXT_DAT_RW_NUM_M << REG_EXT_DAT_RW_NUM_S);
+ if (mmc->ios.bus_width)
+ pack_size = cmd->data->blksz * 8 + (16 - 1) * 4;
+ else
+ pack_size = cmd->data->blksz * 8 + (16 - 1);
+ ext |= (pack_size << REG_EXT_DAT_RW_NUM_S);
+
+ if (cmd->data->flags & MMC_DATA_WRITE)
+ send |= REG_SEND_CMD_SEND_DATA;
+ else
+ send |= REG_SEND_RESP_HAVE_DATA;
+ }
+
+ send &= ~REG_SEND_CMD_COMMAND_M;
+ send |= (0x40 | cmd->opcode);
+
+ irqc = readl(host->base + SDIO_IRQC);
+ irqc |= REG_IRQC_ARC_CMD_INT;
+
+ irqs = readl(host->base + SDIO_IRQS);
+ irqs |= REG_IRQS_CMD_INT;
+
+ mult = readl(host->base + SDIO_MULT);
+ mult &= ~REG_MULT_PORT_SEL_M;
+ mult |= host->port;
+ mult |= (1 << 31);
+ writel(mult, host->base + SDIO_MULT);
+ writel(irqs, host->base + SDIO_IRQS);
+ writel(irqc, host->base + SDIO_IRQC);
+
+ writel(cmd->arg, host->base + SDIO_ARGU);
+ writel(ext, host->base + SDIO_EXT);
+ writel(send, host->base + SDIO_SEND);
+}
+
+static int meson_mmc_map_dma(struct meson_mmc_host *host,
+ struct mmc_data *data,
+ unsigned int flags)
+{ u32 dma_len;
+ struct scatterlist *sg = data->sg;
+
+ if (sg->offset & 3 || sg->length & 3) {
+ dev_err(mmc_dev(host->mmc),
+ "unaligned scatterlist: os %x length %d\n",
+ sg->offset, sg->length);
+ return -EINVAL;
+ }
+
+ dma_len = dma_map_sg(mmc_dev(host->mmc), data->sg, data->sg_len,
+ ((data->flags & MMC_DATA_READ) ?
+ DMA_FROM_DEVICE : DMA_TO_DEVICE));
+ if (dma_len == 0) {
+ dev_err(mmc_dev(host->mmc), "dma_map_sg failed\n");
+ return -ENOMEM;
+ }
+
+ return 0;
+}
+
+static void meson_mmc_request(struct mmc_host *mmc, struct mmc_request *mrq)
+{
+ struct meson_mmc_host *host = mmc_priv(mmc);
+ struct mmc_command *cmd = mrq->cmd;
+ struct mmc_data *data = mrq->data;
+ unsigned long flags;
+ int ret;
+
+ spin_lock_irqsave(&host->lock, flags);
+
+ if (host->error) {
+ cmd->error = host->error;
+ spin_unlock_irqrestore(&host->lock, flags);
+ mmc_request_done(mmc, mrq);
+ return;
+ }
+
+ if (data) {
+ ret = meson_mmc_map_dma(host, data, data->flags);
+ if (ret < 0) {
+ dev_err(mmc_dev(mmc), "map DMA failed\n");
+ cmd->error = ret;
+ data->error = ret;
+ spin_unlock_irqrestore(&host->lock, flags);
+ mmc_request_done(mmc, mrq);
+ return;
+ }
+ writel(sg_dma_address(data->sg), host->base + SDIO_ADDR);
+ }
+
+ host->mrq = mrq;
+ meson_mmc_start_cmd(mmc, mrq->cmd);
+
+ spin_unlock_irqrestore(&host->lock, flags);
+
+ schedule_delayed_work(&host->timeout_work, host->timeout);
+}
+
+static irqreturn_t meson_mmc_irq(int irq, void *data)
+{
+ struct meson_mmc_host *host = (void *) data;
+ struct mmc_request *mrq = host->mrq;
+ u32 irqs;
+
+ irqs = readl(host->base + SDIO_IRQS);
+ if (mrq && (irqs & REG_IRQS_CMD_INT))
+ return IRQ_WAKE_THREAD;
+
+ return IRQ_HANDLED;
+}
+
+void meson_mmc_read_response(struct meson_mmc_host *host)
+{
+ struct mmc_command *cmd = host->mrq->cmd;
+ u32 mult;
+ int i, resp[4] = { 0 };
+
+ mult = readl(host->base + SDIO_MULT);
+ mult |= REG_MULT_WR_RD_OUT_IND;
+ mult &= ~(REG_MULT_RD_INDEX_M << REG_MULT_RD_INDEX_S);
+ writel(mult, host->base + SDIO_MULT);
+
+ if (cmd->flags & MMC_RSP_136) {
+ for (i = 0; i <= 3; i++)
+ resp[3 - i] = readl(host->base + SDIO_ARGU);
+ cmd->resp[0] = (resp[0] << 8) | ((resp[1] >> 24) & 0xff);
+ cmd->resp[1] = (resp[1] << 8) | ((resp[2] >> 24) & 0xff);
+ cmd->resp[2] = (resp[2] << 8) | ((resp[3] >> 24) & 0xff);
+ cmd->resp[3] = (resp[3] << 8);
+ } else if (cmd->flags & MMC_RSP_PRESENT) {
+ cmd->resp[0] = readl(host->base + SDIO_ARGU);
+ }
+}
+
+static irqreturn_t meson_mmc_irq_thread(int irq, void *irq_data)
+{
+ struct meson_mmc_host *host = (void *) irq_data;
+ struct mmc_data *data;
+ unsigned long flags;
+ struct mmc_request *mrq;
+ u32 irqs, send;
+
+ cancel_delayed_work_sync(&host->timeout_work);
+ spin_lock_irqsave(&host->lock, flags);
+
+ mrq = host->mrq;
+ data = mrq->data;
+
+ if (!mrq) {
+ spin_unlock_irqrestore(&host->lock, flags);
+ return IRQ_HANDLED;
+ }
+
+ if (host->cmd_is_stop)
+ goto out;
+
+ irqs = readl(host->base + SDIO_IRQS);
+ send = readl(host->base + SDIO_SEND);
+
+ mrq->cmd->error = 0;
+
+ if (!data) {
+ if (!((irqs & REG_IRQS_RESP_CRC7) ||
+ (send & REG_SEND_RESP_NO_CRC7)))
+ mrq->cmd->error = -EILSEQ;
+ else
+ meson_mmc_read_response(host);
+ } else {
+ if (!((irqs & REG_IRQS_RD_CRC16) ||
+ (irqs & REG_IRQS_WR_CRC16))) {
+ mrq->cmd->error = -EILSEQ;
+ } else {
+ data->bytes_xfered = data->blksz * data->blocks;
+ dma_unmap_sg(mmc_dev(host->mmc), data->sg, data->sg_len,
+ ((data->flags & MMC_DATA_READ) ?
+ DMA_FROM_DEVICE : DMA_TO_DEVICE));
+ }
+ }
+
+ if (mrq->stop) {
+ host->cmd_is_stop = true;
+ meson_mmc_start_cmd(host->mmc, mrq->stop);
+ spin_unlock_irqrestore(&host->lock, flags);
+ return IRQ_HANDLED;
+ }
+
+out:
+ host->cmd_is_stop = false;
+ host->mrq = NULL;
+ spin_unlock_irqrestore(&host->lock, flags);
+ mmc_request_done(host->mmc, mrq);
+
+ return IRQ_HANDLED;
+}
+
+static void meson_mmc_timeout(struct work_struct *work)
+{
+ struct meson_mmc_host *host = container_of(work,
+ struct meson_mmc_host,
+ timeout_work.work);
+ struct mmc_request *mrq = host->mrq;
+ unsigned long flags;
+ u32 irqc;
+
+ /* Do not run after meson_mmc_remove() */
+ if (host->dying)
+ return;
+
+ spin_lock_irqsave(&host->lock, flags);
+
+ dev_err(mmc_dev(host->mmc), "Timeout on CMD%u\n", mrq->cmd->opcode);
+
+ irqc = readl(host->base + SDIO_IRQC);
+ irqc &= ~REG_IRQC_ARC_CMD_INT;
+ writel(irqc, host->base + SDIO_IRQC);
+
+ mrq->cmd->error = -ETIMEDOUT;
+
+ host->mrq = NULL;
+ spin_unlock_irqrestore(&host->lock, flags);
+
+ mmc_request_done(host->mmc, mrq);
+}
+
+static struct mmc_host_ops meson_mmc_ops = {
+ .request = meson_mmc_request,
+ .set_ios = meson_mmc_set_ios,
+ .get_cd = mmc_gpio_get_cd,
+};
+
+static int meson_mmc_probe(struct platform_device *pdev)
+{
+ struct mmc_host *mmc;
+ struct meson_mmc_host *host;
+ struct pinctrl *pinctrl;
+ struct pinctrl_state *pins;
+ struct resource *res;
+ int ret, irq;
+
+ mmc = mmc_alloc_host(sizeof(struct meson_mmc_host), &pdev->dev);
+ if (!mmc) {
+ dev_err(&pdev->dev, "mmc alloc host failed\n");
+ return -ENOMEM;
+ }
+
+ host = mmc_priv(mmc);
+ host->mmc = mmc;
+ host->timeout = msecs_to_jiffies(2000);
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ host->base = devm_ioremap_resource(&pdev->dev, res);
+ if (IS_ERR(host->base)) {
+ ret = PTR_ERR(host->base);
+ goto error_free_host;
+ }
+
+ irq = platform_get_irq(pdev, 0);
+ ret = devm_request_threaded_irq(&pdev->dev, irq, meson_mmc_irq,
+ meson_mmc_irq_thread, 0, "meson_mmc",
+ host);
+ if (ret)
+ goto error_free_host;
+
+ host->clk = devm_clk_get(&pdev->dev, NULL);
+ if (IS_ERR(host->clk)) {
+ ret = PTR_ERR(host->clk);
+ goto error_free_host;
+ }
+
+ /* we do not support scatter lists in hardware */
+ mmc->max_segs = 1;
+ mmc->max_req_size = SDIO_BOUNCE_REQ_SIZE;
+ mmc->max_seg_size = mmc->max_req_size;
+ mmc->max_blk_count = 256;
+ mmc->max_blk_size = mmc->max_req_size / mmc->max_blk_count;
+ mmc->f_min = 300000;
+ mmc->f_max = 50000000;
+ mmc->caps |= MMC_CAP_4_BIT_DATA;
+ mmc->caps |= MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED;
+ mmc->caps2 |= MMC_CAP2_NO_SDIO;
+ mmc->ocr_avail = MMC_VDD_33_34;
+ mmc->ops = &meson_mmc_ops;
+
+ spin_lock_init(&host->lock);
+
+ INIT_DELAYED_WORK(&host->timeout_work, meson_mmc_timeout);
+
+ pinctrl = devm_pinctrl_get(&pdev->dev);
+ if (IS_ERR(pinctrl)) {
+ ret = PTR_ERR(pinctrl);
+ goto error_free_host;
+ }
+
+ /* We need to know at runtime which port we are using */
+ pins = pinctrl_lookup_state(pinctrl, "sdio_b");
+ if (!IS_ERR(pins))
+ host->port = 1; /* PORT_B */
+ else
+ host->port = 0; /* PORT_A */
+
+ ret = mmc_of_parse(mmc);
+ if (ret)
+ goto error_free_host;
+
+ platform_set_drvdata(pdev, mmc);
+
+ ret = mmc_add_host(mmc);
+ if (ret)
+ goto error_free_host;
+
+ dev_info(&pdev->dev, "base:0x%p irq:%u port:%u\n",
+ host->base, irq, host->port);
+
+ return 0;
+
+error_free_host:
+ mmc_free_host(mmc);
+
+ return ret;
+}
+
+static int meson_mmc_remove(struct platform_device *pdev)
+{
+ struct mmc_host *mmc = platform_get_drvdata(pdev);
+ struct meson_mmc_host *host = mmc_priv(mmc);
+
+ host->dying = true;
+
+ mmc_remove_host(mmc);
+ cancel_delayed_work_sync(&host->timeout_work);
+
+ mmc_free_host(mmc);
+
+ return 0;
+}
+
+static const struct of_device_id meson_mmc_of_match[] = {
+ { .compatible = "amlogic,meson-mmc", },
+ { /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, meson_mmc_of_match);
+
+static struct platform_driver meson_mmc_driver = {
+ .probe = meson_mmc_probe,
+ .remove = meson_mmc_remove,
+ .driver = {
+ .name = "meson-mmc",
+ .of_match_table = of_match_ptr(meson_mmc_of_match),
+ },
+};
+
+module_platform_driver(meson_mmc_driver);
+
+MODULE_DESCRIPTION("Meson Secure Digital Host Driver");
+MODULE_AUTHOR("Carlo Caione <carlo@xxxxxxxxxxxx>");
+MODULE_LICENSE("GPL");
--
2.5.0
--
To unsubscribe from this list: send the line "unsubscribe linux-mmc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
