There are no in-kernel users of the MVSDIO platform data method
(instantiating from a board file) so just delete this code and
make this a DT-only driver. We depend on OF and check that we have
an OF node in probe().
Cc: Nicolas Pitre <nico@xxxxxxxxxxx>
Cc: Andrew Lunn <andrew@xxxxxxx>
Cc: Sebastian Hesselbarth <sebastian.hesselbarth@xxxxxxxxx>
Signed-off-by: Linus Walleij <linus.walleij@xxxxxxxxxx>
---
drivers/mmc/host/Kconfig | 1 +
drivers/mmc/host/mvsdio.c | 63 +++++++++++------------------------------------
2 files changed, 15 insertions(+), 49 deletions(-)
diff --git a/drivers/mmc/host/Kconfig b/drivers/mmc/host/Kconfig
index 1dee533634c9..1526b8a10b09 100644
--- a/drivers/mmc/host/Kconfig
+++ b/drivers/mmc/host/Kconfig
@@ -455,6 +455,7 @@ config MMC_TIFM_SD
config MMC_MVSDIO
tristate "Marvell MMC/SD/SDIO host driver"
depends on PLAT_ORION
+ depends on OF
---help---
This selects the Marvell SDIO host driver.
SDIO may currently be found on the Kirkwood 88F6281 and 88F6192
diff --git a/drivers/mmc/host/mvsdio.c b/drivers/mmc/host/mvsdio.c
index 18c70380ea93..42296e55b9de 100644
--- a/drivers/mmc/host/mvsdio.c
+++ b/drivers/mmc/host/mvsdio.c
@@ -20,8 +20,6 @@
#include <linux/scatterlist.h>
#include <linux/irq.h>
#include <linux/clk.h>
-#include <linux/gpio.h>
-#include <linux/of_gpio.h>
#include <linux/of_irq.h>
#include <linux/mmc/host.h>
#include <linux/mmc/slot-gpio.h>
@@ -36,12 +34,6 @@
static int maxfreq;
static int nodma;
-struct mvsdio_platform_data {
- unsigned int clock;
- int gpio_card_detect;
- int gpio_write_protect;
-};
-
struct mvsd_host {
void __iomem *base;
struct mmc_request *mrq;
@@ -709,6 +701,10 @@ static int mvsd_probe(struct platform_device *pdev)
struct resource *r;
int ret, irq;
+ if (!np) {
+ dev_err(&pdev->dev, "no DT node\n");
+ return -ENODEV;
+ }
r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
irq = platform_get_irq(pdev, 0);
if (!r || irq < 0)
@@ -732,8 +728,12 @@ static int mvsd_probe(struct platform_device *pdev)
* fixed rate clock).
*/
host->clk = devm_clk_get(&pdev->dev, NULL);
- if (!IS_ERR(host->clk))
- clk_prepare_enable(host->clk);
+ if (IS_ERR(host->clk)) {
+ dev_err(&pdev->dev, "no clock associated\n");
+ ret = -EINVAL;
+ goto out;
+ }
+ clk_prepare_enable(host->clk);
mmc->ops = &mvsd_ops;
@@ -749,45 +749,10 @@ static int mvsd_probe(struct platform_device *pdev)
mmc->max_seg_size = mmc->max_blk_size * mmc->max_blk_count;
mmc->max_req_size = mmc->max_blk_size * mmc->max_blk_count;
- if (np) {
- if (IS_ERR(host->clk)) {
- dev_err(&pdev->dev, "DT platforms must have a clock associated\n");
- ret = -EINVAL;
- goto out;
- }
-
- host->base_clock = clk_get_rate(host->clk) / 2;
- ret = mmc_of_parse(mmc);
- if (ret < 0)
- goto out;
- } else {
- const struct mvsdio_platform_data *mvsd_data;
-
- mvsd_data = pdev->dev.platform_data;
- if (!mvsd_data) {
- ret = -ENXIO;
- goto out;
- }
- mmc->caps = MMC_CAP_4_BIT_DATA | MMC_CAP_SDIO_IRQ |
- MMC_CAP_SD_HIGHSPEED | MMC_CAP_MMC_HIGHSPEED;
- host->base_clock = mvsd_data->clock / 2;
- /* GPIO 0 regarded as invalid for backward compatibility */
- if (mvsd_data->gpio_card_detect &&
- gpio_is_valid(mvsd_data->gpio_card_detect)) {
- ret = mmc_gpio_request_cd(mmc,
- mvsd_data->gpio_card_detect,
- 0);
- if (ret)
- goto out;
- } else {
- mmc->caps |= MMC_CAP_NEEDS_POLL;
- }
-
- if (mvsd_data->gpio_write_protect &&
- gpio_is_valid(mvsd_data->gpio_write_protect))
- mmc_gpio_request_ro(mmc, mvsd_data->gpio_write_protect);
- }
-
+ host->base_clock = clk_get_rate(host->clk) / 2;
+ ret = mmc_of_parse(mmc);
+ if (ret < 0)
+ goto out;
if (maxfreq)
mmc->f_max = maxfreq;
--
2.4.3
--
To unsubscribe from this list: send the line "unsubscribe linux-mmc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
