On Thu, Nov 19, 2015 at 3:56 PM, Arnd Bergmann <arnd@xxxxxxxx> wrote: >> cap-sd-highspeed; >> sd-uhs-sdr12; >> sd-uhs-sdr25; >> sd-uhs-sdr50; >> sd-uhs-ddr50; >> sd-uhs-sdr104; These values normally come from the Host Controllers CAPS registers and are only needed if the CAPS register setting are incorrect. >> - cap-mmc-hw-reset: eMMC hardware reset is supported This is only set if the driver supplies a hw_reset callback and the Arasan driver does not. >> - cap-sdio-irq: enable SDIO IRQ signalling on this interface This is only set if the driver supplies a enable_sdio_irq and the Arasan driver does not. Al -- To unsubscribe from this list: send the line "unsubscribe linux-mmc" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
