Re: [PATCH 2/2] mmc: sdhci-esdhc-imx: correct the tuning-step setting

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Ulf,

On Thu, Nov 19, 2015 at 7:20 PM, Ulf Hansson <ulf.hansson@xxxxxxxxxx> wrote:
> On 10 November 2015 at 10:43, Haibo Chen <haibo.chen@xxxxxxxxxxxxx> wrote:
>> Here we use '|=' to set the tuning-step, but before that, we should
>> clear the tuning-step, otherwise we could got the wrong setting.
>>
>> Signed-off-by: Haibo Chen <haibo.chen@xxxxxxxxxxxxx>
>> ---
>>  drivers/mmc/host/sdhci-esdhc-imx.c | 7 +++++--
>>  1 file changed, 5 insertions(+), 2 deletions(-)
>>
>> diff --git a/drivers/mmc/host/sdhci-esdhc-imx.c b/drivers/mmc/host/sdhci-esdhc-imx.c
>> index 1508949..64275c7 100644
>> --- a/drivers/mmc/host/sdhci-esdhc-imx.c
>> +++ b/drivers/mmc/host/sdhci-esdhc-imx.c
>> @@ -76,6 +76,7 @@
>>  #define ESDHC_STD_TUNING_EN            (1 << 24)
>>  /* NOTE: the minimum valid tuning start tap for mx6sl is 1 */
>>  #define ESDHC_TUNING_START_TAP         0x1
>> +#define ESDHC_TUNING_STEP_MASK         0x00070000
>>  #define ESDHC_TUNING_STEP_SHIFT                16
>>
>>  /* pinctrl state */
>> @@ -489,9 +490,11 @@ static void esdhc_writew_le(struct sdhci_host *host, u16 val, int reg)
>>                                 m |= ESDHC_MIX_CTRL_FBCLK_SEL;
>>                                 tuning_ctrl = readl(host->ioaddr + ESDHC_TUNING_CTRL);
>>                                 tuning_ctrl |= ESDHC_STD_TUNING_EN | ESDHC_TUNING_START_TAP;
>> -                               if (imx_data->boarddata.tuning_step)
>> +                               if (imx_data->boarddata.tuning_step) {
>> +                                       tuning_ctrl &= ~ESDHC_TUNING_STEP_MASK;
>>                                         tuning_ctrl |= imx_data->boarddata.tuning_step << ESDHC_TUNING_STEP_SHIFT;
>> -                                       writel(tuning_ctrl, host->ioaddr + ESDHC_TUNING_CTRL);
>> +                               }
>> +                               writel(tuning_ctrl, host->ioaddr + ESDHC_TUNING_CTRL);
>>                         } else {
>>                                 v &= ~ESDHC_MIX_CTRL_EXE_TUNE;
>>                         }
>> --
>> 1.9.1
>>
>
> Looks good to me, but is there a dependency to patch 1/2 that should
> prevent me from applying this one?
>

No dependency.
Acked-by: Dong Aisheng <aisheng.dong@xxxxxxxxxxxxx>

Regards
Dong Aisheng

> Kind regards
> Uffe
> --
> To unsubscribe from this list: send the line "unsubscribe linux-mmc" in
> the body of a message to majordomo@xxxxxxxxxxxxxxx
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
--
To unsubscribe from this list: send the line "unsubscribe linux-mmc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Linux USB Devel]     [Linux Media]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux