On 13 October 2015 at 03:00, Bjorn Andersson
<bjorn.andersson@xxxxxxxxxxxxxx> wrote:
> This allows us to specify expected current consumption of the vmmc and
> vqmmc regulators. This is needed to bring the supplying regulators out
> of their low-power-mode while accessing the mmc.
This indeed makes sense, still I need to think a bit more on this.
For example, can we allow these regulators to enter low power again at
some times? If so, when and what should that current value be.
Moreover, wouldn't vmmc|vqmmc-active-current be depending what eMMC/SD
card that is attached?
>
> Signed-off-by: Bjorn Andersson <bjorn.andersson@xxxxxxxxxxxxxx>
> ---
>
> The sd specification states that if the host can provide more than 150mA this
> should be indicated in the "XPC value in the argument of ACMD41" for SDXC
> cards. Should this be tied in with the added property as well?
>
> Changes since v1:
> - Property name and description updated to clarify intention
>
> Documentation/devicetree/bindings/mmc/mmc.txt | 2 ++
> drivers/mmc/core/core.c | 6 ++++++
> drivers/mmc/core/host.c | 4 ++++
> include/linux/mmc/host.h | 2 ++
> 4 files changed, 14 insertions(+)
>
> diff --git a/Documentation/devicetree/bindings/mmc/mmc.txt b/Documentation/devicetree/bindings/mmc/mmc.txt
> index 0384fc3f64e8..7514083a9f55 100644
> --- a/Documentation/devicetree/bindings/mmc/mmc.txt
> +++ b/Documentation/devicetree/bindings/mmc/mmc.txt
> @@ -47,6 +47,8 @@ Optional properties:
> - mmc-hs400-1_2v: eMMC HS400 mode(1.2V I/O) is supported
> - dsr: Value the card's (optional) Driver Stage Register (DSR) should be
> programmed with. Valid range: [0 .. 0xffff].
> +- vmmc-active-current: current required from the vmmc regulator, in uA
> +- vqmmc-active-current: current required from the vqmmc regulator, in uA
>
> *NOTE* on CD and WP polarity. To use common for all SD/MMC host controllers line
> polarity properties, we have to fix the meaning of the "normal" and "inverted"
> diff --git a/drivers/mmc/core/core.c b/drivers/mmc/core/core.c
> index 23fa221ce803..603f40136306 100644
> --- a/drivers/mmc/core/core.c
> +++ b/drivers/mmc/core/core.c
> @@ -1469,12 +1469,18 @@ int mmc_regulator_get_supply(struct mmc_host *mmc)
> mmc->ocr_avail = ret;
> else
> dev_warn(dev, "Failed getting OCR mask: %d\n", ret);
> +
> + if (mmc->supply.vmmc_current)
> + regulator_set_load(mmc->supply.vmmc, mmc->supply.vmmc_current);
> }
>
> if (IS_ERR(mmc->supply.vqmmc)) {
> if (PTR_ERR(mmc->supply.vqmmc) == -EPROBE_DEFER)
> return -EPROBE_DEFER;
> dev_info(dev, "No vqmmc regulator found\n");
> + } else {
> + if (mmc->supply.vqmmc_current)
> + regulator_set_load(mmc->supply.vqmmc, mmc->supply.vqmmc_current);
> }
>
> return 0;
> diff --git a/drivers/mmc/core/host.c b/drivers/mmc/core/host.c
> index 970e6906930b..ede508d63fb5 100644
> --- a/drivers/mmc/core/host.c
> +++ b/drivers/mmc/core/host.c
> @@ -235,6 +235,10 @@ int mmc_of_parse(struct mmc_host *host)
> host->caps2 |= MMC_CAP2_CD_ACTIVE_HIGH;
> }
>
> + /* Parse regulator load requests */
> + of_property_read_u32(np, "vmmc-active-current", &host->supply.vmmc_current);
> + of_property_read_u32(np, "vqmmc-active-current", &host->supply.vqmmc_current);
> +
> /* Parse Write Protection */
> ro_cap_invert = of_property_read_bool(np, "wp-inverted");
>
> diff --git a/include/linux/mmc/host.h b/include/linux/mmc/host.h
> index 8673ffe3d86e..640d8dbb8559 100644
> --- a/include/linux/mmc/host.h
> +++ b/include/linux/mmc/host.h
> @@ -197,6 +197,8 @@ struct mmc_pwrseq;
> struct mmc_supply {
> struct regulator *vmmc; /* Card power supply */
> struct regulator *vqmmc; /* Optional Vccq supply */
> + u32 vmmc_current; /* Requested current for vmmc */
> + u32 vqmmc_current; /* Requested current for vqmmc */
> };
>
> struct mmc_host {
> --
> 2.4.2
>
Kind regards
Uffe
--
To unsubscribe from this list: send the line "unsubscribe linux-mmc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
