On Fri, Oct 09, 2015 at 03:03:53AM +0200, Marcin Wojtas wrote:
> The newest revisions of A388-GP (v1.5 and higher) support only
> DAT3-based card detection. Revisions < v1.5 based on GPIO detection
> via I2C expander, but this solution is supposed to be deprecated on
> new boards. In order to satisfy all type of hardware this commit
> changes card detection to use software polling mechanism.
Hi Marcin
Thanks for going with broken-cd and not introducing a regression for
older boards. As others have said, a comment would be good, but
otherwise:
Acked-by: Andrew Lunn <andrew@xxxxxxx>
Thanks
Andrew
>
> Signed-off-by: Marcin Wojtas <mw@xxxxxxxxxxxx>
> ---
> arch/arm/boot/dts/armada-388-gp.dts | 2 +-
> 1 file changed, 1 insertion(+), 1 deletion(-)
>
> diff --git a/arch/arm/boot/dts/armada-388-gp.dts b/arch/arm/boot/dts/armada-388-gp.dts
> index 391dea9..403a86b 100644
> --- a/arch/arm/boot/dts/armada-388-gp.dts
> +++ b/arch/arm/boot/dts/armada-388-gp.dts
> @@ -213,8 +213,8 @@
> sdhci@d8000 {
> pinctrl-names = "default";
> pinctrl-0 = <&sdhci_pins>;
> - cd-gpios = <&expander0 5 GPIO_ACTIVE_LOW>;
> no-1-8-v;
> + broken-cd;
> wp-inverted;
> bus-width = <8>;
> status = "okay";
> --
> 1.8.3.1
>
--
To unsubscribe from this list: send the line "unsubscribe linux-mmc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
