+Russell
On 17 September 2015 at 10:16, Ludovic Desroches
<ludovic.desroches@xxxxxxxxx> wrote:
> The Atmel sdhci device needs a new quirk. sdhci_set_clock set the Clock
> Control Register to 0 before computing the new value and writing it.
> It disables the internal clock which causes a reset mecanism. If we
> write the new value before this reset mecanism is done, it will prevent
> the stabilisation of the internal clock, so a delay is needed. This
> delay is about 2-3 cycles of the base clock. To be safe, a 1 ms delay is
> used.
>
> Signed-off-by: Ludovic Desroches <ludovic.desroches@xxxxxxxxx>
> ---
> Hi Ulf,
>
> Can you take these patches as fixes? I thought it was better to introduce a
> quirk instead of duplicating a part of the sdhci_set_clock function to
> implement my own set_clock function.
Hi Ludovic,
Sorry for the delay!
I have been thinking of how to address patches for sdhci that adds
more quirks/callbacks. To be honest, I am fed up with such patches as
I think it keeps the development of sdhci going in the wrong
direction.
Instead, I have been hoping for someone to have stab into turning
sdhci into a library as Russell King pointed out several times as
well.
Now, as my response too you had a big delay for these patches and
because it's a fix intended for the rc, I am going to apply patch1 and
patch2 anyway. Although, you and everybody else that contributes to
the sdhci development, please consider this as the *last* time for
adding quirks/callbacks, unless you have *very good* reasons.
Kind regards
Uffe
>
> Regards
>
>
> drivers/mmc/host/sdhci.c | 2 ++
> drivers/mmc/host/sdhci.h | 5 +++++
> 2 files changed, 7 insertions(+)
>
> diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c
> index 64b7fdb..fbc7efd 100644
> --- a/drivers/mmc/host/sdhci.c
> +++ b/drivers/mmc/host/sdhci.c
> @@ -1160,6 +1160,8 @@ void sdhci_set_clock(struct sdhci_host *host, unsigned int clock)
> host->mmc->actual_clock = 0;
>
> sdhci_writew(host, 0, SDHCI_CLOCK_CONTROL);
> + if (host->quirks2 & SDHCI_QUIRK2_NEED_DELAY_AFTER_INT_CLK_RST)
> + mdelay(1);
>
> if (clock == 0)
> return;
> diff --git a/drivers/mmc/host/sdhci.h b/drivers/mmc/host/sdhci.h
> index 7c02ff4..9d4aa31 100644
> --- a/drivers/mmc/host/sdhci.h
> +++ b/drivers/mmc/host/sdhci.h
> @@ -412,6 +412,11 @@ struct sdhci_host {
> #define SDHCI_QUIRK2_ACMD23_BROKEN (1<<14)
> /* Broken Clock divider zero in controller */
> #define SDHCI_QUIRK2_CLOCK_DIV_ZERO_BROKEN (1<<15)
> +/*
> + * When internal clock is disabled, a delay is needed before modifying the
> + * SD clock frequency or enabling back the internal clock.
> + */
> +#define SDHCI_QUIRK2_NEED_DELAY_AFTER_INT_CLK_RST (1<<16)
>
> int irq; /* Device IRQ */
> void __iomem *ioaddr; /* Mapped address */
> --
> 2.5.0
>
--
To unsubscribe from this list: send the line "unsubscribe linux-mmc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
