[PATCH v2 1/2] mmc: core: enable CMD19 tuning for DDR50 mode

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



From: Weijun Yang <york.yang@xxxxxxx>

As SD Specifications Part1 Physical Layer Specification Version
3.01 says, CMD19 tuning is available for unlocked cards in transfer
state of 1.8V signaling mode. The small difference between v3.00
and 3.01 spec means that CMD19 tuning is also available for DDR50
mode.

Signed-off-by: Weijun Yang <york.yang@xxxxxxx>
Signed-off-by: Barry Song <Baohua.Song@xxxxxxx>
---
 drivers/mmc/core/sd.c    | 19 +++++++++++++++++--
 drivers/mmc/host/sdhci.c |  1 +
 2 files changed, 18 insertions(+), 2 deletions(-)

diff --git a/drivers/mmc/core/sd.c b/drivers/mmc/core/sd.c
index 4e7366a..eaf8cb3 100644
--- a/drivers/mmc/core/sd.c
+++ b/drivers/mmc/core/sd.c
@@ -628,9 +628,24 @@ static int mmc_sd_init_uhs_card(struct mmc_card *card)
 	 * SDR104 mode SD-cards. Note that tuning is mandatory for SDR104.
 	 */
 	if (!mmc_host_is_spi(card->host) &&
-	    (card->sd_bus_speed == UHS_SDR50_BUS_SPEED ||
-	     card->sd_bus_speed == UHS_SDR104_BUS_SPEED))
+		(card->sd_bus_speed == UHS_SDR50_BUS_SPEED ||
+		 card->sd_bus_speed == UHS_DDR50_BUS_SPEED ||
+		 card->sd_bus_speed == UHS_SDR104_BUS_SPEED)) {
 		err = mmc_execute_tuning(card);
+
+		/*
+		 * As SD Specifications Part1 Physical Layer Specification Version
+		 * 3.01 says, CMD19 tuning is available for unlocked cards in transfer
+		 * state of 1.8V signaling mode. The small difference between v3.00
+		 * and 3.01 spec means that CMD19 tuning is also available for DDR50
+		 * mode.
+		 */
+		if (err && (card->sd_bus_speed == UHS_DDR50_BUS_SPEED)) {
+			pr_warn("%s: ddr50 tuning failed\n", mmc_hostname(card->host));
+			err = 0;
+		}
+	}
+
 out:
 	kfree(status);
 
diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c
index 64b7fdb..382810d 100644
--- a/drivers/mmc/host/sdhci.c
+++ b/drivers/mmc/host/sdhci.c
@@ -1915,6 +1915,7 @@ static int sdhci_execute_tuning(struct mmc_host *mmc, u32 opcode)
 		break;
 
 	case MMC_TIMING_UHS_SDR104:
+	case MMC_TIMING_UHS_DDR50:
 		break;
 
 	case MMC_TIMING_UHS_SDR50:
-- 
1.9.1

--
To unsubscribe from this list: send the line "unsubscribe linux-mmc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Linux USB Devel]     [Linux Media]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux