Hi,
On 09/10/2015 12:02 PM, Yousong Zhou wrote:
> On 10 September 2015 at 08:33, Shawn Lin <shawn.lin@xxxxxxxxxxxxxx> wrote:
>> On 2015/9/10 0:33, Yousong Zhou wrote:
>>>
>>> This will allow retrying access mode switch to High-Speed in the
>>> following commit.
Well, it's not solution. (It's my preference.)
Did you consider the card removable case?
Could you share which vendor's card needs to retry?
Best Regards,
Jaehoon Chung
>>>
>>> Signed-off-by: Yousong Zhou <yszhou4tech@xxxxxxxxx>
>>> ---
>>> drivers/mmc/core/core.c | 4 ++++
>>> drivers/mmc/core/sd_ops.c | 5 +++--
>>> drivers/mmc/core/sd_ops.h | 10 ++++++++--
>>> 3 files changed, 15 insertions(+), 4 deletions(-)
>>>
>>
>> I test this patchset with my already-working sd cards, seems ok.
>> Actually I don't have a card to test like yours that need retry switch HS,
>> but from the changes itself, it's harmless to other cards.
>
> Thanks for the testing.
>
> Those cards normally won't burn out after MMC_CMD_RETRIES access mode switch
> failures, right?
>
>>
>> so,
>>
>> Tested-by: Shawn Lin <shawn.lin@xxxxxxxxxxxxxx>
>>
>> BTW, I can't find the cover letter? And another should be clarified, plz see
>> comment blow
>>
>>
>>> diff --git a/drivers/mmc/core/core.c b/drivers/mmc/core/core.c
>>> index 9ad73f3..e726bb1 100644
>>> --- a/drivers/mmc/core/core.c
>>> +++ b/drivers/mmc/core/core.c
>>> @@ -468,11 +468,13 @@ static void mmc_wait_for_req_done(struct mmc_host
>>> *host,
>>> struct mmc_request *mrq)
>>> {
>>> struct mmc_command *cmd;
>>> + struct mmc_data *data;
>>>
>>> while (1) {
>>> wait_for_completion(&mrq->completion);
>>>
>>> cmd = mrq->cmd;
>>> + data = mrq->data;
>>>
>>> /*
>>> * If host has timed out waiting for the sanitize
>>> @@ -501,6 +503,8 @@ static void mmc_wait_for_req_done(struct mmc_host
>>> *host,
>>> mmc_hostname(host), cmd->opcode, cmd->error);
>>> cmd->retries--;
>>> cmd->error = 0;
>>> + if (data)
>>> + data->error = 0;
>>
>>
>> What's this change for?
>
> sunxi-mmc will set both cmd->error and data->error to -ETIMEDOUT in case of any
> interrupt error bit was set (related code within `sunxi_finalize_request()').
>
> `__mmc_sd_switch()' thought it was a error case if data->error != 0.
>
> So the data->error bit needs to be cleared before next retry.
>
> Regards,
>
> yousnog
>
>>
>>
>>> __mmc_start_request(host, mrq);
>>> }
>>>
>>> diff --git a/drivers/mmc/core/sd_ops.c b/drivers/mmc/core/sd_ops.c
>>> index 48d0c93..22bef3c 100644
>>> --- a/drivers/mmc/core/sd_ops.c
>>> +++ b/drivers/mmc/core/sd_ops.c
>>> @@ -304,8 +304,8 @@ int mmc_app_send_scr(struct mmc_card *card, u32 *scr)
>>> return 0;
>>> }
>>>
>>> -int mmc_sd_switch(struct mmc_card *card, int mode, int group,
>>> - u8 value, u8 *resp)
>>> +int __mmc_sd_switch(struct mmc_card *card, int mode, int group,
>>> + u8 value, u8 *resp, int retries)
>>> {
>>> struct mmc_request mrq = {NULL};
>>> struct mmc_command cmd = {0};
>>> @@ -328,6 +328,7 @@ int mmc_sd_switch(struct mmc_card *card, int mode, int
>>> group,
>>> cmd.arg &= ~(0xF << (group * 4));
>>> cmd.arg |= value << (group * 4);
>>> cmd.flags = MMC_RSP_SPI_R1 | MMC_RSP_R1 | MMC_CMD_ADTC;
>>> + cmd.retries = retries;
>>>
>>> data.blksz = 64;
>>> data.blocks = 1;
>>> diff --git a/drivers/mmc/core/sd_ops.h b/drivers/mmc/core/sd_ops.h
>>> index ffc2305..a53c51e 100644
>>> --- a/drivers/mmc/core/sd_ops.h
>>> +++ b/drivers/mmc/core/sd_ops.h
>>> @@ -17,9 +17,15 @@ int mmc_send_app_op_cond(struct mmc_host *host, u32
>>> ocr, u32 *rocr);
>>> int mmc_send_if_cond(struct mmc_host *host, u32 ocr);
>>> int mmc_send_relative_addr(struct mmc_host *host, unsigned int *rca);
>>> int mmc_app_send_scr(struct mmc_card *card, u32 *scr);
>>> -int mmc_sd_switch(struct mmc_card *card, int mode, int group,
>>> - u8 value, u8 *resp);
>>> int mmc_app_sd_status(struct mmc_card *card, void *ssr);
>>>
>>> +int __mmc_sd_switch(struct mmc_card *card, int mode, int group,
>>> + u8 value, u8 *resp, int retries);
>>> +static inline int mmc_sd_switch(struct mmc_card *card, int mode, int
>>> group,
>>> + u8 value, u8 *resp)
>>> +{
>>> + return __mmc_sd_switch(card, mode, group, value, resp, 0);
>>> +}
>>> +
>>> #endif
>>>
>>>
>>
>>
>> --
>> Best Regards
>> Shawn Lin
>>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-mmc" in
> the body of a message to majordomo@xxxxxxxxxxxxxxx
> More majordomo info at http://vger.kernel.org/majordomo-info.html
>
--
To unsubscribe from this list: send the line "unsubscribe linux-mmc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
