I tested this with the latest (4.2 RC8) but the controller is not working. Is there something I can do? Thanks. Marco Ferrari Email: ferrari.marco@xxxxxxxxx Website: ferrarimarco.info On Sun, Dec 22, 2013 at 11:30 PM, Marco Ferrari <ferrari.marco@xxxxxxxxx> wrote: > Hi list, > this is the my first bug report for kernel, so please forgive any errors. > > Thanks. > > Marco Ferrari > Website: http://www.ferrarimarco.info > > -------------------- > > [1.] One line summary of the problem: > [Sony VAIO VGN-G21VN_B] Ricoh R5C843 SD Card reader not working > > [2.] Full description of the problem/report: > SD Card reader is not working. When I insert a SD or SDHC card nothing > happens. The reader is not even listed under lspci. I have updated all > the packages with apt. I tried to boot Ubuntu (12.04) with an SD > plugged in but no luck. This notebook has a (separate slot) Ricoh > R5C592 Memory Stick Reader that is working as expected (auto mounts > the MS when inserted in the reader). > Expected behavior: SD card reader to correctly read the inserted SD card. > > [3.] Keywords (i.e., modules, networking, kernel): > > [4.] Kernel version (from /proc/version): > Linux version 3.13.0-031300rc3-generic (apw@gomeisa) (gcc version > 4.6.3 (Ubuntu/Linaro 4.6.3-1ubuntu5) ) #201312061335 SMP Fri Dec 6 > 18:37:23 UTC 2013 > > [5.] Output of Oops.. message (if applicable) with symbolic > information resolved (see Documentation/oops-tracing.txt): > N/A > > [6.] A small shell script or example program which triggers the > problem (if possible): > N/A > > [7.] Environment > Description: Ubuntu 13.04 > Release: 13.04 > > [7.1.] Software (add the output of the ver_linux script here) > If some fields are empty or look unusual you may have an old version. > Compare to the current minimal requirements in Documentation/Changes. > > Linux deimos-lnx 3.13.0-031300rc3-generic #201312061335 SMP Fri Dec 6 > 18:37:23 UTC 2013 x86_64 x86_64 x86_64 GNU/Linux > > Gnu C 4.7 > Gnu make 3.81 > binutils 2.23.2 > util-linux 2.20.1 > mount support > module-init-tools 9 > e2fsprogs 1.42.5 > pcmciautils 018 > PPP 2.4.5 > Linux C Library 2.17 > Dynamic linker (ldd) 2.17 > Procps 3.3.3 > Net-tools 1.60 > Kbd 1.15.5 > Sh-utils 8.20 > wireless-tools 30 > Modules Loaded ctr ccm joydev snd_hda_codec_realtek > tpm_infineon hid_generic snd_hda_intel snd_hda_codec snd_hwdep snd_pcm > snd_page_alloc snd_seq_midi snd_seq_midi_event snd_rawmidi arc4 usbhid > iwl4965 snd_seq pcmcia iwlegacy hid mac80211 snd_seq_device btusb > psmouse lpc_ich yenta_socket serio_raw r592 pcmcia_rsrc snd_timer i915 > memstick pcmcia_core cfg80211 sony_laptop drm_kms_helper snd > parport_pc ppdev bnep rfcomm tpm_tis bluetooth drm soundcore > i2c_algo_bit video mac_hid lp parport firewire_ohci firewire_core > crc_itu_t sky2 > > > [7.2.] Processor information (from /proc/cpuinfo): > processor : 0 > vendor_id : GenuineIntel > cpu family : 6 > model : 15 > model name : Intel(R) Core(TM)2 CPU U7500 @ 1.06GHz > stepping : 2 > microcode : 0x57 > cpu MHz : 800.000 > cache size : 2048 KB > physical id : 0 > siblings : 2 > core id : 0 > cpu cores : 2 > apicid : 0 > initial apicid : 0 > fpu : yes > fpu_exception : yes > cpuid level : 10 > wp : yes > flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov > pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx > lm constant_tsc arch_perfmon pebs bts rep_good nopl aperfmperf pni > dtes64 monitor ds_cpl vmx est tm2 ssse3 cx16 xtpr pdcm lahf_lm dtherm > tpr_shadow > bogomips : 2128.20 > clflush size : 64 > cache_alignment : 64 > address sizes : 36 bits physical, 48 bits virtual > power management: > > processor : 1 > vendor_id : GenuineIntel > cpu family : 6 > model : 15 > model name : Intel(R) Core(TM)2 CPU U7500 @ 1.06GHz > stepping : 2 > microcode : 0x57 > cpu MHz : 800.000 > cache size : 2048 KB > physical id : 0 > siblings : 2 > core id : 1 > cpu cores : 2 > apicid : 1 > initial apicid : 1 > fpu : yes > fpu_exception : yes > cpuid level : 10 > wp : yes > flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov > pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx > lm constant_tsc arch_perfmon pebs bts rep_good nopl aperfmperf pni > dtes64 monitor ds_cpl vmx est tm2 ssse3 cx16 xtpr pdcm lahf_lm dtherm > tpr_shadow > bogomips : 2128.20 > clflush size : 64 > cache_alignment : 64 > address sizes : 36 bits physical, 48 bits virtual > power management: > > > [7.3.] Module information (from /proc/modules): > ctr 13193 2 - Live 0x0000000000000000 > ccm 17856 2 - Live 0x0000000000000000 > joydev 17575 0 - Live 0x0000000000000000 > snd_hda_codec_realtek 61978 1 - Live 0x0000000000000000 > tpm_infineon 17410 0 - Live 0x0000000000000000 > hid_generic 12548 0 - Live 0x0000000000000000 > snd_hda_intel 57222 3 - Live 0x0000000000000000 > snd_hda_codec 195017 2 snd_hda_codec_realtek,snd_hda_intel, Live > 0x0000000000000000 > snd_hwdep 13613 1 snd_hda_codec, Live 0x0000000000000000 > snd_pcm 107140 2 snd_hda_intel,snd_hda_codec, Live 0x0000000000000000 > snd_page_alloc 18798 2 snd_hda_intel,snd_pcm, Live 0x0000000000000000 > snd_seq_midi 13324 0 - Live 0x0000000000000000 > snd_seq_midi_event 14899 1 snd_seq_midi, Live 0x0000000000000000 > snd_rawmidi 30465 1 snd_seq_midi, Live 0x0000000000000000 > arc4 12573 2 - Live 0x0000000000000000 > usbhid 53067 0 - Live 0x0000000000000000 > iwl4965 118783 0 - Live 0x0000000000000000 > snd_seq 66061 2 snd_seq_midi,snd_seq_midi_event, Live 0x0000000000000000 > pcmcia 62760 0 - Live 0x0000000000000000 > iwlegacy 105154 1 iwl4965, Live 0x0000000000000000 > hid 106254 2 hid_generic,usbhid, Live 0x0000000000000000 > mac80211 654078 2 iwl4965,iwlegacy, Live 0x0000000000000000 > snd_seq_device 14497 3 snd_seq_midi,snd_rawmidi,snd_seq, Live 0x0000000000000000 > btusb 28326 0 - Live 0x0000000000000000 > psmouse 104142 0 - Live 0x0000000000000000 > lpc_ich 21163 0 - Live 0x0000000000000000 > yenta_socket 45434 0 - Live 0x0000000000000000 > serio_raw 13462 0 - Live 0x0000000000000000 > r592 18148 0 - Live 0x0000000000000000 > pcmcia_rsrc 18591 1 yenta_socket, Live 0x0000000000000000 > snd_timer 30038 2 snd_pcm,snd_seq, Live 0x0000000000000000 > i915 816671 3 - Live 0x0000000000000000 > memstick 16968 1 r592, Live 0x0000000000000000 > pcmcia_core 23715 3 pcmcia,yenta_socket,pcmcia_rsrc, Live 0x0000000000000000 > cfg80211 509407 3 iwl4965,iwlegacy,mac80211, Live 0x0000000000000000 > sony_laptop 54937 0 - Live 0x0000000000000000 > drm_kms_helper 53224 1 i915, Live 0x0000000000000000 > snd 73850 16 snd_hda_codec_realtek,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm,snd_seq_midi,snd_rawmidi,snd_seq,snd_seq_device,snd_timer, > Live 0x0000000000000000 > parport_pc 36962 0 - Live 0x0000000000000000 > ppdev 17711 0 - Live 0x0000000000000000 > bnep 19884 2 - Live 0x0000000000000000 > rfcomm 74748 12 - Live 0x0000000000000000 > tpm_tis 19116 0 - Live 0x0000000000000000 > bluetooth 411140 22 btusb,bnep,rfcomm, Live 0x0000000000000000 > drm 308397 4 i915,drm_kms_helper, Live 0x0000000000000000 > soundcore 12680 1 snd, Live 0x0000000000000000 > i2c_algo_bit 13564 1 i915, Live 0x0000000000000000 > video 19859 1 i915, Live 0x0000000000000000 > mac_hid 13253 0 - Live 0x0000000000000000 > lp 17799 0 - Live 0x0000000000000000 > parport 42481 3 parport_pc,ppdev,lp, Live 0x0000000000000000 > firewire_ohci 45158 0 - Live 0x0000000000000000 > firewire_core 69362 1 firewire_ohci, Live 0x0000000000000000 > crc_itu_t 12707 1 firewire_core, Live 0x0000000000000000 > sky2 63205 0 - Live 0x0000000000000000 > > > [7.4.] Loaded driver and hardware information (/proc/ioports, /proc/iomem) > marco@deimos-lnx:~$ cat /proc/ioports > 0000-001f : dma1 > 0020-0021 : pic1 > 0040-0043 : timer0 > 0050-0053 : timer1 > 0060-0060 : keyboard > 0062-0062 : EC data > 0064-0064 : keyboard > 0066-0066 : EC cmd > 0070-0077 : rtc0 > 0080-008f : dma page reg > 00a0-00a1 : pic2 > 00c0-00df : dma2 > 00f0-00ff : fpu > 0170-0177 : 0000:00:1f.1 > 0170-0177 : ata_piix > 01f0-01f7 : 0000:00:1f.1 > 01f0-01f7 : ata_piix > 0376-0376 : 0000:00:1f.1 > 0376-0376 : ata_piix > 03f6-03f6 : 0000:00:1f.1 > 03f6-03f6 : ata_piix > 0680-06ff : pnp 00:05 > 0800-080f : pnp 00:05 > 0cf8-0cff : PCI conf1 > 1000-1003 : ACPI PM1a_EVT_BLK > 1004-1005 : ACPI PM1a_CNT_BLK > 1008-100b : ACPI PM_TMR > 1010-1015 : ACPI CPU throttle > 1020-1020 : ACPI PM2_CNT_BLK > 1028-102f : ACPI GPE0_BLK > 1030-1033 : iTCO_wdt > 1060-107f : iTCO_wdt > 1180-11bf : 0000:00:1f.0 > 1180-11bf : pnp 00:05 > 1640-164f : pnp 00:05 > 1800-1807 : 0000:00:02.0 > 1810-181f : 0000:00:1f.1 > 1810-181f : ata_piix > 1820-183f : 0000:00:1d.0 > 1820-183f : uhci_hcd > 1840-185f : 0000:00:1d.1 > 1840-185f : uhci_hcd > 1860-187f : 0000:00:1d.2 > 1860-187f : uhci_hcd > 1880-189f : 0000:00:1d.3 > 1880-189f : uhci_hcd > 18a0-18bf : 0000:00:1f.3 > 2000-2fff : PCI Bus 0000:02 > 3000-3fff : PCI Bus 0000:06 > 3000-30ff : 0000:06:00.0 > 3000-30ff : sky2 > 4000-4fff : PCI Bus 0000:07 > 4000-40ff : PCI CardBus 0000:08 > 4400-44ff : PCI CardBus 0000:08 > c000-c01f : Sony Programmable I/O Device > fe00-fe01 : pnp 00:05 > > marco@deimos-lnx:~$ cat /proc/iomem > 00000000-00000fff : reserved > 00001000-0009f7ff : System RAM > 0009f800-0009ffff : reserved > 000c0000-000c7fff : Video ROM > 000dc000-000fffff : reserved > 000f0000-000fffff : System ROM > 00100000-7f66ffff : System RAM > 01000000-0177171d : Kernel code > 0177171e-01d1bdbf : Kernel data > 01e78000-01fdcfff : Kernel bss > 7f670000-7f6fffff : ACPI Non-volatile Storage > 7f700000-7fffffff : reserved > 7f800000-7fffffff : Graphics Stolen Memory > 80000000-83ffffff : PCI Bus 0000:07 > 80000000-83ffffff : PCI CardBus 0000:08 > 84000000-842fffff : PCI Bus 0000:06 > 84000000-8401ffff : 0000:06:00.0 > 84300000-84300fff : Intel Flush Page > 88000000-88000fff : 0000:07:04.0 > 88000000-88000fff : yenta_socket > 8c000000-8fffffff : PCI CardBus 0000:08 > d0000000-dfffffff : 0000:00:02.0 > d0000000-d02fffff : BOOTFB > e0000000-efffffff : PCI MMCONFIG 0000 [bus 00-ff] > e0000000-efffffff : pnp 00:00 > f0000000-f1ffffff : PCI Bus 0000:02 > f2000000-f3ffffff : PCI Bus 0000:02 > f2000000-f2001fff : 0000:02:00.0 > f2000000-f2001fff : iwl4965 > f4000000-f40fffff : PCI Bus 0000:06 > f4000000-f4003fff : 0000:06:00.0 > f4000000-f4003fff : sky2 > f4100000-f41fffff : PCI Bus 0000:07 > f4100000-f41007ff : 0000:07:04.1 > f4100000-f41007ff : firewire_ohci > f4100c00-f4100cff : 0000:07:04.4 > f4100c00-f4100cff : r592 > f4200000-f427ffff : 0000:00:02.0 > f4280000-f42fffff : 0000:00:02.1 > f4300000-f433ffff : 0000:00:02.0 > f4540000-f4543fff : 0000:00:1b.0 > f4540000-f4543fff : ICH HD audio > f4544000-f45443ff : 0000:00:1d.7 > f4544000-f45443ff : ehci_hcd > fec00000-fec0ffff : reserved > fec00000-fec003ff : IOAPIC 0 > fed00000-fed003ff : HPET 0 > fed00000-fed003ff : reserved > fed14000-fed19fff : reserved > fed14000-fed17fff : pnp 00:00 > fed18000-fed18fff : pnp 00:00 > fed19000-fed19fff : pnp 00:00 > fed1c000-fed8ffff : reserved > fed1c000-fed1ffff : pnp 00:00 > fed1f410-fed1f414 : iTCO_wdt > fed20000-fed3ffff : pnp 00:00 > fed45000-fed8ffff : pnp 00:00 > fee00000-fee00fff : Local APIC > fee00000-fee00fff : reserved > ff000000-ffffffff : reserved > > > [7.5.] PCI information ('lspci -vvv' as root) > 00:00.0 Host bridge: Intel Corporation Mobile 945GM/PM/GMS, 943/940GML > and 945GT Express Memory Controller Hub (rev 03) > Subsystem: Sony Corporation Device 9026 > Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR+ FastB2B- DisINTx- > Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- > <TAbort- <MAbort+ >SERR- <PERR- INTx- > Latency: 0 > Capabilities: [e0] Vendor Specific Information: Len=09 <?> > Kernel driver in use: agpgart-intel > > 00:02.0 VGA compatible controller: Intel Corporation Mobile 945GM/GMS, > 943/940GML Express Integrated Graphics Controller (rev 03) (prog-if 00 > [VGA controller]) > Subsystem: Sony Corporation Device 9026 > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR- FastB2B- DisINTx- > Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- > <TAbort- <MAbort- >SERR- <PERR- INTx- > Latency: 0 > Interrupt: pin A routed to IRQ 16 > Region 0: Memory at f4200000 (32-bit, non-prefetchable) [size=512K] > Region 1: I/O ports at 1800 [size=8] > Region 2: Memory at d0000000 (32-bit, prefetchable) [size=256M] > Region 3: Memory at f4300000 (32-bit, non-prefetchable) [size=256K] > Expansion ROM at <unassigned> [disabled] > Capabilities: [90] MSI: Enable- Count=1/1 Maskable- 64bit- > Address: 00000000 Data: 0000 > Capabilities: [d0] Power Management version 2 > Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) > Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- > Kernel driver in use: i915 > > 00:02.1 Display controller: Intel Corporation Mobile 945GM/GMS/GME, > 943/940GML Express Integrated Graphics Controller (rev 03) > Subsystem: Sony Corporation Device 9026 > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR- FastB2B- DisINTx- > Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- > <TAbort- <MAbort- >SERR- <PERR- INTx- > Latency: 0 > Region 0: Memory at f4280000 (32-bit, non-prefetchable) [size=512K] > Capabilities: [d0] Power Management version 2 > Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) > Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- > > 00:1b.0 Audio device: Intel Corporation NM10/ICH7 Family High > Definition Audio Controller (rev 02) > Subsystem: Sony Corporation Device 9026 > Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR- FastB2B- DisINTx+ > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- > <TAbort- <MAbort- >SERR- <PERR- INTx- > Latency: 0, Cache Line Size: 64 bytes > Interrupt: pin A routed to IRQ 44 > Region 0: Memory at f4540000 (64-bit, non-prefetchable) [size=16K] > Capabilities: [50] Power Management version 2 > Flags: PMEClk- DSI- D1- D2- AuxCurrent=55mA PME(D0+,D1-,D2-,D3hot+,D3cold+) > Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- > Capabilities: [60] MSI: Enable+ Count=1/1 Maskable- 64bit+ > Address: 00000000fee0300c Data: 4122 > Capabilities: [70] Express (v1) Root Complex Integrated Endpoint, MSI 00 > DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us > ExtTag- RBE- FLReset- > DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported- > RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+ > MaxPayload 128 bytes, MaxReadReq 128 bytes > DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend- > LnkCap: Port #0, Speed unknown, Width x0, ASPM unknown, Latency L0 > <64ns, L1 <1us > ClockPM- Surprise- LLActRep- BwNot- > LnkCtl: ASPM Disabled; Disabled- Retrain- CommClk- > ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- > LnkSta: Speed unknown, Width x0, TrErr- Train- SlotClk- DLActive- > BWMgmt- ABWMgmt- > Capabilities: [100 v1] Virtual Channel > Caps: LPEVC=0 RefClk=100ns PATEntryBits=1 > Arb: Fixed- WRR32- WRR64- WRR128- > Ctrl: ArbSelect=Fixed > Status: InProgress- > VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans- > Arb: Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256- > Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=01 > Status: NegoPending- InProgress- > VC1: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans- > Arb: Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256- > Ctrl: Enable+ ID=1 ArbSelect=Fixed TC/VC=80 > Status: NegoPending- InProgress- > Capabilities: [130 v1] Root Complex Link > Desc: PortNumber=0f ComponentID=02 EltType=Config > Link0: Desc: TargetPort=00 TargetComponent=02 AssocRCRB- > LinkType=MemMapped LinkValid+ > Addr: 00000000fed1c000 > Kernel driver in use: snd_hda_intel > > 00:1c.0 PCI bridge: Intel Corporation NM10/ICH7 Family PCI Express > Port 1 (rev 02) (prog-if 00 [Normal decode]) > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR- FastB2B- DisINTx+ > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- > <TAbort- <MAbort- >SERR- <PERR- INTx- > Latency: 0, Cache Line Size: 64 bytes > Bus: primary=00, secondary=02, subordinate=05, sec-latency=0 > I/O behind bridge: 00002000-00002fff > Memory behind bridge: f2000000-f3ffffff > Prefetchable memory behind bridge: 00000000f0000000-00000000f1ffffff > Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- > <TAbort- <MAbort- <SERR- <PERR- > BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B- > PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- > Capabilities: [40] Express (v1) Root Port (Slot+), MSI 00 > DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s unlimited, L1 unlimited > ExtTag- RBE- FLReset- > DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported- > RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- > MaxPayload 128 bytes, MaxReadReq 128 bytes > DevSta: CorrErr+ UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend- > LnkCap: Port #1, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 > <256ns, L1 <4us > ClockPM- Surprise- LLActRep+ BwNot- > LnkCtl: ASPM L0s Enabled; RCB 64 bytes Disabled- Retrain- CommClk+ > ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- > LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive+ > BWMgmt- ABWMgmt- > SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ > Slot #2, PowerLimit 6.500W; Interlock- NoCompl- > SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet+ CmdCplt- HPIrq- LinkChg- > Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock- > SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock- > Changed: MRL- PresDet- LinkState- > RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible- > RootCap: CRSVisible- > RootSta: PME ReqID 0000, PMEStatus- PMEPending- > Capabilities: [80] MSI: Enable+ Count=1/1 Maskable- 64bit- > Address: fee0300c Data: 4191 > Capabilities: [90] Subsystem: Sony Corporation Device 9026 > Capabilities: [a0] Power Management version 2 > Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+) > Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- > Capabilities: [100 v1] Virtual Channel > Caps: LPEVC=0 RefClk=100ns PATEntryBits=1 > Arb: Fixed+ WRR32- WRR64- WRR128- > Ctrl: ArbSelect=Fixed > Status: InProgress- > VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans- > Arb: Fixed+ WRR32- WRR64- WRR128- TWRR128- WRR256- > Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=01 > Status: NegoPending- InProgress- > VC1: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans- > Arb: Fixed+ WRR32- WRR64- WRR128- TWRR128- WRR256- > Ctrl: Enable- ID=0 ArbSelect=Fixed TC/VC=00 > Status: NegoPending- InProgress- > Capabilities: [180 v1] Root Complex Link > Desc: PortNumber=01 ComponentID=02 EltType=Config > Link0: Desc: TargetPort=00 TargetComponent=02 AssocRCRB- > LinkType=MemMapped LinkValid+ > Addr: 00000000fed1c001 > Kernel driver in use: pcieport > > 00:1c.1 PCI bridge: Intel Corporation NM10/ICH7 Family PCI Express > Port 2 (rev 02) (prog-if 00 [Normal decode]) > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR- FastB2B- DisINTx+ > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- > <TAbort- <MAbort- >SERR- <PERR- INTx- > Latency: 0, Cache Line Size: 64 bytes > Bus: primary=00, secondary=06, subordinate=06, sec-latency=0 > I/O behind bridge: 00003000-00003fff > Memory behind bridge: f4000000-f40fffff > Prefetchable memory behind bridge: 0000000084000000-00000000842fffff > Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- > <TAbort- <MAbort- <SERR- <PERR- > BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B- > PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- > Capabilities: [40] Express (v1) Root Port (Slot+), MSI 00 > DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s unlimited, L1 unlimited > ExtTag- RBE- FLReset- > DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported- > RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- > MaxPayload 128 bytes, MaxReadReq 128 bytes > DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend- > LnkCap: Port #2, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 > <256ns, L1 <4us > ClockPM- Surprise- LLActRep+ BwNot- > LnkCtl: ASPM L0s L1 Enabled; RCB 64 bytes Disabled- Retrain- CommClk+ > ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- > LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive+ > BWMgmt- ABWMgmt- > SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ > Slot #3, PowerLimit 6.500W; Interlock- NoCompl- > SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg- > Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock- > SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock- > Changed: MRL- PresDet+ LinkState+ > RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible- > RootCap: CRSVisible- > RootSta: PME ReqID 0000, PMEStatus- PMEPending- > Capabilities: [80] MSI: Enable+ Count=1/1 Maskable- 64bit- > Address: fee0300c Data: 41a1 > Capabilities: [90] Subsystem: Sony Corporation Device 9026 > Capabilities: [a0] Power Management version 2 > Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+) > Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- > Capabilities: [100 v1] Virtual Channel > Caps: LPEVC=0 RefClk=100ns PATEntryBits=1 > Arb: Fixed+ WRR32- WRR64- WRR128- > Ctrl: ArbSelect=Fixed > Status: InProgress- > VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans- > Arb: Fixed+ WRR32- WRR64- WRR128- TWRR128- WRR256- > Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=01 > Status: NegoPending- InProgress- > VC1: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans- > Arb: Fixed+ WRR32- WRR64- WRR128- TWRR128- WRR256- > Ctrl: Enable- ID=0 ArbSelect=Fixed TC/VC=00 > Status: NegoPending- InProgress- > Capabilities: [180 v1] Root Complex Link > Desc: PortNumber=02 ComponentID=02 EltType=Config > Link0: Desc: TargetPort=00 TargetComponent=02 AssocRCRB- > LinkType=MemMapped LinkValid+ > Addr: 00000000fed1c001 > Kernel driver in use: pcieport > > 00:1d.0 USB controller: Intel Corporation NM10/ICH7 Family USB UHCI > Controller #1 (rev 02) (prog-if 00 [UHCI]) > Subsystem: Sony Corporation Device 9026 > Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR- FastB2B- DisINTx- > Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- > <TAbort- <MAbort- >SERR- <PERR- INTx- > Latency: 0 > Interrupt: pin A routed to IRQ 17 > Region 4: I/O ports at 1820 [size=32] > Kernel driver in use: uhci_hcd > > 00:1d.1 USB controller: Intel Corporation NM10/ICH7 Family USB UHCI > Controller #2 (rev 02) (prog-if 00 [UHCI]) > Subsystem: Sony Corporation Device 9026 > Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR- FastB2B- DisINTx- > Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- > <TAbort- <MAbort- >SERR- <PERR- INTx- > Latency: 0 > Interrupt: pin B routed to IRQ 19 > Region 4: I/O ports at 1840 [size=32] > Kernel driver in use: uhci_hcd > > 00:1d.2 USB controller: Intel Corporation NM10/ICH7 Family USB UHCI > Controller #3 (rev 02) (prog-if 00 [UHCI]) > Subsystem: Sony Corporation Device 9026 > Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR- FastB2B- DisINTx- > Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- > <TAbort- <MAbort- >SERR- <PERR- INTx- > Latency: 0 > Interrupt: pin C routed to IRQ 21 > Region 4: I/O ports at 1860 [size=32] > Kernel driver in use: uhci_hcd > > 00:1d.3 USB controller: Intel Corporation NM10/ICH7 Family USB UHCI > Controller #4 (rev 02) (prog-if 00 [UHCI]) > Subsystem: Sony Corporation Device 9026 > Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR- FastB2B- DisINTx- > Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- > <TAbort- <MAbort- >SERR- <PERR- INTx- > Latency: 0 > Interrupt: pin A routed to IRQ 17 > Region 4: I/O ports at 1880 [size=32] > Kernel driver in use: uhci_hcd > > 00:1d.7 USB controller: Intel Corporation NM10/ICH7 Family USB2 EHCI > Controller (rev 02) (prog-if 20 [EHCI]) > Subsystem: Sony Corporation Device 9026 > Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR- FastB2B- DisINTx- > Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- > <TAbort- <MAbort- >SERR- <PERR- INTx- > Latency: 0 > Interrupt: pin D routed to IRQ 23 > Region 0: Memory at f4544000 (32-bit, non-prefetchable) [size=1K] > Capabilities: [50] Power Management version 2 > Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+) > Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- > Capabilities: [58] Debug port: BAR=1 offset=00a0 > Kernel driver in use: ehci-pci > > 00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev e2) > (prog-if 01 [Subtractive decode]) > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR- FastB2B- DisINTx- > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- > <TAbort- <MAbort- >SERR- <PERR- INTx- > Latency: 0 > Bus: primary=00, secondary=07, subordinate=0b, sec-latency=32 > I/O behind bridge: 00004000-00004fff > Memory behind bridge: f4100000-f41fffff > Prefetchable memory behind bridge: 0000000080000000-0000000083ffffff > Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- > <TAbort- <MAbort+ <SERR- <PERR- > BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B- > PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- > Capabilities: [50] Subsystem: Sony Corporation Device 9026 > > 00:1f.0 ISA bridge: Intel Corporation 82801GBM (ICH7-M) LPC Interface > Bridge (rev 02) > Subsystem: Sony Corporation Device 9026 > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR- FastB2B- DisINTx- > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- > <TAbort- <MAbort- >SERR- <PERR- INTx- > Latency: 0 > Capabilities: [e0] Vendor Specific Information: Len=0c <?> > Kernel driver in use: lpc_ich > > 00:1f.1 IDE interface: Intel Corporation 82801G (ICH7 Family) IDE > Controller (rev 02) (prog-if 8a [Master SecP PriP]) > Subsystem: Sony Corporation Device 9026 > Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR- FastB2B- DisINTx- > Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- > <TAbort- <MAbort- >SERR- <PERR- INTx- > Latency: 0 > Interrupt: pin B routed to IRQ 22 > Region 0: I/O ports at 01f0 [size=8] > Region 1: I/O ports at 03f4 [size=1] > Region 2: I/O ports at 0170 [size=8] > Region 3: I/O ports at 0374 [size=1] > Region 4: I/O ports at 1810 [size=16] > Kernel driver in use: ata_piix > > 00:1f.3 SMBus: Intel Corporation NM10/ICH7 Family SMBus Controller (rev 02) > Subsystem: Sony Corporation Device 9026 > Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR- FastB2B- DisINTx- > Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- > <TAbort- <MAbort- >SERR- <PERR- INTx- > Region 4: I/O ports at 18a0 [size=32] > > 02:00.0 Network controller: Intel Corporation PRO/Wireless 4965 AG or > AGN [Kedron] Network Connection (rev 61) > Subsystem: Intel Corporation PRO/Wireless 4965 AG or AGN > Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR- FastB2B- DisINTx- > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- > <TAbort- <MAbort- >SERR- <PERR- INTx- > Latency: 0, Cache Line Size: 64 bytes > Interrupt: pin A routed to IRQ 43 > Region 0: Memory at f2000000 (64-bit, non-prefetchable) [size=8K] > Capabilities: [c8] Power Management version 3 > Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+) > Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- > Capabilities: [d0] MSI: Enable+ Count=1/1 Maskable- 64bit+ > Address: 00000000fee0200c Data: 41e1 > Capabilities: [e0] Express (v1) Endpoint, MSI 00 > DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <512ns, L1 unlimited > ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset- > DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported- > RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+ > MaxPayload 128 bytes, MaxReadReq 128 bytes > DevSta: CorrErr+ UncorrErr+ FatalErr- UnsuppReq+ AuxPwr+ TransPend- > LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 > <128ns, L1 <64us > ClockPM+ Surprise- LLActRep- BwNot- > LnkCtl: ASPM L0s Enabled; RCB 64 bytes Disabled- Retrain- CommClk+ > ExtSynch- ClockPM+ AutWidDis- BWInt- AutBWInt- > LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- > BWMgmt- ABWMgmt- > Capabilities: [100 v1] Advanced Error Reporting > UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- > MalfTLP- ECRC- UnsupReq+ ACSViol- > UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- > MalfTLP- ECRC- UnsupReq- ACSViol- > UESvrt: DLP+ SDES- TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ > MalfTLP+ ECRC- UnsupReq- ACSViol- > CESta: RxErr+ BadTLP- BadDLLP- Rollover- Timeout+ NonFatalErr+ > CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+ > AERCap: First Error Pointer: 14, GenCap- CGenEn- ChkCap- ChkEn- > Capabilities: [140 v1] Device Serial Number 00-13-e8-ff-ff-f6-74-7f > Kernel driver in use: iwl4965 > > 06:00.0 Ethernet controller: Marvell Technology Group Ltd. 88E8055 > PCI-E Gigabit Ethernet Controller (rev 13) > Subsystem: Sony Corporation Device 9026 > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR- FastB2B- DisINTx+ > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- > <TAbort- <MAbort- >SERR- <PERR- INTx- > Latency: 0, Cache Line Size: 64 bytes > Interrupt: pin A routed to IRQ 42 > Region 0: Memory at f4000000 (64-bit, non-prefetchable) [size=16K] > Region 2: I/O ports at 3000 [size=256] > [virtual] Expansion ROM at 84000000 [disabled] [size=128K] > Capabilities: [48] Power Management version 3 > Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+) > Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=1 PME- > Capabilities: [50] Vital Product Data > Product Name: Marvell Yukon 88E8055 Gigabit Ethernet Controller > Read-only fields: > [PN] Part number: Yukon 88E8055 > [EC] Engineering changes: Rev. 1.3 > [MN] Manufacture ID: 4d 61 72 76 65 6c 6c > [SN] Serial number: AbCdEfG58F16C > [CP] Extended capability: 01 10 cc 03 > [RV] Reserved: checksum good, 9 byte(s) reserved > Read/write fields: > [RW] Read-write area: 121 byte(s) free > End > Capabilities: [5c] MSI: Enable+ Count=1/1 Maskable- 64bit+ > Address: 00000000fee0300c Data: 41c1 > Capabilities: [e0] Express (v1) Legacy Endpoint, MSI 00 > DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s unlimited, L1 unlimited > ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset- > DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported- > RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- > MaxPayload 128 bytes, MaxReadReq 512 bytes > DevSta: CorrErr+ UncorrErr+ FatalErr- UnsuppReq+ AuxPwr+ TransPend- > LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 > <256ns, L1 unlimited > ClockPM+ Surprise- LLActRep- BwNot- > LnkCtl: ASPM L0s L1 Enabled; RCB 128 bytes Disabled- Retrain- CommClk+ > ExtSynch- ClockPM+ AutWidDis- BWInt- AutBWInt- > LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- > BWMgmt- ABWMgmt- > Capabilities: [100 v1] Advanced Error Reporting > UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- > MalfTLP- ECRC- UnsupReq- ACSViol- > UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- > MalfTLP- ECRC- UnsupReq- ACSViol- > UESvrt: DLP+ SDES- TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ > MalfTLP+ ECRC- UnsupReq- ACSViol- > CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+ > CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+ > AERCap: First Error Pointer: 1f, GenCap- CGenEn- ChkCap- ChkEn- > Kernel driver in use: sky2 > > 07:04.0 CardBus bridge: Ricoh Co Ltd RL5c476 II (rev ba) > Subsystem: Sony Corporation Device 9026 > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR- FastB2B- DisINTx- > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- > <TAbort- <MAbort- >SERR- <PERR- INTx- > Latency: 168 > Interrupt: pin A routed to IRQ 20 > Region 0: Memory at 88000000 (32-bit, non-prefetchable) [size=4K] > Bus: primary=07, secondary=08, subordinate=0b, sec-latency=176 > Memory window 0: 80000000-83ffffff (prefetchable) > Memory window 1: 8c000000-8fffffff > I/O window 0: 00004000-000040ff > I/O window 1: 00004400-000044ff > BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset- 16bInt+ PostWrite+ > 16-bit legacy interface ports at 0001 > Kernel driver in use: yenta_cardbus > > 07:04.1 FireWire (IEEE 1394): Ricoh Co Ltd R5C832 IEEE 1394 Controller > (rev 04) (prog-if 10 [OHCI]) > Subsystem: Sony Corporation Device 9026 > Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR- FastB2B- DisINTx- > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- > <TAbort- <MAbort- >SERR- <PERR- INTx- > Latency: 32 (500ns min, 1000ns max), Cache Line Size: 64 bytes > Interrupt: pin B routed to IRQ 21 > Region 0: Memory at f4100000 (32-bit, non-prefetchable) [size=2K] > Capabilities: [dc] Power Management version 2 > Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+) > Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=2 PME+ > Kernel driver in use: firewire_ohci > > 07:04.4 System peripheral: Ricoh Co Ltd R5C592 Memory Stick Bus Host > Adapter (rev 11) > Subsystem: Sony Corporation Device 9026 > Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR- FastB2B- DisINTx- > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- > <TAbort- <MAbort- >SERR- <PERR- INTx- > Latency: 32, Cache Line Size: 64 bytes > Interrupt: pin C routed to IRQ 22 > Region 0: Memory at f4100c00 (32-bit, non-prefetchable) [size=256] > Capabilities: [80] Power Management version 2 > Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+) > Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=2 PME- > Kernel driver in use: r592 > > marco@deimos-lnx:~$ sudo lspci -vvv > 00:00.0 Host bridge: Intel Corporation Mobile 945GM/PM/GMS, 943/940GML > and 945GT Express Memory Controller Hub (rev 03) > Subsystem: Sony Corporation Device 9026 > Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR+ FastB2B- DisINTx- > Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- > <TAbort- <MAbort+ >SERR- <PERR- INTx- > Latency: 0 > Capabilities: [e0] Vendor Specific Information: Len=09 <?> > Kernel driver in use: agpgart-intel > > 00:02.0 VGA compatible controller: Intel Corporation Mobile 945GM/GMS, > 943/940GML Express Integrated Graphics Controller (rev 03) (prog-if 00 > [VGA controller]) > Subsystem: Sony Corporation Device 9026 > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR- FastB2B- DisINTx- > Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- > <TAbort- <MAbort- >SERR- <PERR- INTx- > Latency: 0 > Interrupt: pin A routed to IRQ 16 > Region 0: Memory at f4200000 (32-bit, non-prefetchable) [size=512K] > Region 1: I/O ports at 1800 [size=8] > Region 2: Memory at d0000000 (32-bit, prefetchable) [size=256M] > Region 3: Memory at f4300000 (32-bit, non-prefetchable) [size=256K] > Expansion ROM at <unassigned> [disabled] > Capabilities: [90] MSI: Enable- Count=1/1 Maskable- 64bit- > Address: 00000000 Data: 0000 > Capabilities: [d0] Power Management version 2 > Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) > Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- > Kernel driver in use: i915 > > 00:02.1 Display controller: Intel Corporation Mobile 945GM/GMS/GME, > 943/940GML Express Integrated Graphics Controller (rev 03) > Subsystem: Sony Corporation Device 9026 > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR- FastB2B- DisINTx- > Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- > <TAbort- <MAbort- >SERR- <PERR- INTx- > Latency: 0 > Region 0: Memory at f4280000 (32-bit, non-prefetchable) [size=512K] > Capabilities: [d0] Power Management version 2 > Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) > Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- > > 00:1b.0 Audio device: Intel Corporation NM10/ICH7 Family High > Definition Audio Controller (rev 02) > Subsystem: Sony Corporation Device 9026 > Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR- FastB2B- DisINTx+ > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- > <TAbort- <MAbort- >SERR- <PERR- INTx- > Latency: 0, Cache Line Size: 64 bytes > Interrupt: pin A routed to IRQ 44 > Region 0: Memory at f4540000 (64-bit, non-prefetchable) [size=16K] > Capabilities: [50] Power Management version 2 > Flags: PMEClk- DSI- D1- D2- AuxCurrent=55mA PME(D0+,D1-,D2-,D3hot+,D3cold+) > Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- > Capabilities: [60] MSI: Enable+ Count=1/1 Maskable- 64bit+ > Address: 00000000fee0300c Data: 4122 > Capabilities: [70] Express (v1) Root Complex Integrated Endpoint, MSI 00 > DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us > ExtTag- RBE- FLReset- > DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported- > RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+ > MaxPayload 128 bytes, MaxReadReq 128 bytes > DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend- > LnkCap: Port #0, Speed unknown, Width x0, ASPM unknown, Latency L0 > <64ns, L1 <1us > ClockPM- Surprise- LLActRep- BwNot- > LnkCtl: ASPM Disabled; Disabled- Retrain- CommClk- > ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- > LnkSta: Speed unknown, Width x0, TrErr- Train- SlotClk- DLActive- > BWMgmt- ABWMgmt- > Capabilities: [100 v1] Virtual Channel > Caps: LPEVC=0 RefClk=100ns PATEntryBits=1 > Arb: Fixed- WRR32- WRR64- WRR128- > Ctrl: ArbSelect=Fixed > Status: InProgress- > VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans- > Arb: Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256- > Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=01 > Status: NegoPending- InProgress- > VC1: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans- > Arb: Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256- > Ctrl: Enable+ ID=1 ArbSelect=Fixed TC/VC=80 > Status: NegoPending- InProgress- > Capabilities: [130 v1] Root Complex Link > Desc: PortNumber=0f ComponentID=02 EltType=Config > Link0: Desc: TargetPort=00 TargetComponent=02 AssocRCRB- > LinkType=MemMapped LinkValid+ > Addr: 00000000fed1c000 > Kernel driver in use: snd_hda_intel > > 00:1c.0 PCI bridge: Intel Corporation NM10/ICH7 Family PCI Express > Port 1 (rev 02) (prog-if 00 [Normal decode]) > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR- FastB2B- DisINTx+ > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- > <TAbort- <MAbort- >SERR- <PERR- INTx- > Latency: 0, Cache Line Size: 64 bytes > Bus: primary=00, secondary=02, subordinate=05, sec-latency=0 > I/O behind bridge: 00002000-00002fff > Memory behind bridge: f2000000-f3ffffff > Prefetchable memory behind bridge: 00000000f0000000-00000000f1ffffff > Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- > <TAbort- <MAbort- <SERR- <PERR- > BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B- > PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- > Capabilities: [40] Express (v1) Root Port (Slot+), MSI 00 > DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s unlimited, L1 unlimited > ExtTag- RBE- FLReset- > DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported- > RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- > MaxPayload 128 bytes, MaxReadReq 128 bytes > DevSta: CorrErr+ UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend- > LnkCap: Port #1, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 > <256ns, L1 <4us > ClockPM- Surprise- LLActRep+ BwNot- > LnkCtl: ASPM L0s Enabled; RCB 64 bytes Disabled- Retrain- CommClk+ > ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- > LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive+ > BWMgmt- ABWMgmt- > SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ > Slot #2, PowerLimit 6.500W; Interlock- NoCompl- > SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet+ CmdCplt- HPIrq- LinkChg- > Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock- > SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock- > Changed: MRL- PresDet- LinkState- > RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible- > RootCap: CRSVisible- > RootSta: PME ReqID 0000, PMEStatus- PMEPending- > Capabilities: [80] MSI: Enable+ Count=1/1 Maskable- 64bit- > Address: fee0300c Data: 4191 > Capabilities: [90] Subsystem: Sony Corporation Device 9026 > Capabilities: [a0] Power Management version 2 > Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+) > Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- > Capabilities: [100 v1] Virtual Channel > Caps: LPEVC=0 RefClk=100ns PATEntryBits=1 > Arb: Fixed+ WRR32- WRR64- WRR128- > Ctrl: ArbSelect=Fixed > Status: InProgress- > VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans- > Arb: Fixed+ WRR32- WRR64- WRR128- TWRR128- WRR256- > Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=01 > Status: NegoPending- InProgress- > VC1: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans- > Arb: Fixed+ WRR32- WRR64- WRR128- TWRR128- WRR256- > Ctrl: Enable- ID=0 ArbSelect=Fixed TC/VC=00 > Status: NegoPending- InProgress- > Capabilities: [180 v1] Root Complex Link > Desc: PortNumber=01 ComponentID=02 EltType=Config > Link0: Desc: TargetPort=00 TargetComponent=02 AssocRCRB- > LinkType=MemMapped LinkValid+ > Addr: 00000000fed1c001 > Kernel driver in use: pcieport > > 00:1c.1 PCI bridge: Intel Corporation NM10/ICH7 Family PCI Express > Port 2 (rev 02) (prog-if 00 [Normal decode]) > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR- FastB2B- DisINTx+ > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- > <TAbort- <MAbort- >SERR- <PERR- INTx- > Latency: 0, Cache Line Size: 64 bytes > Bus: primary=00, secondary=06, subordinate=06, sec-latency=0 > I/O behind bridge: 00003000-00003fff > Memory behind bridge: f4000000-f40fffff > Prefetchable memory behind bridge: 0000000084000000-00000000842fffff > Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- > <TAbort- <MAbort- <SERR- <PERR- > BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B- > PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- > Capabilities: [40] Express (v1) Root Port (Slot+), MSI 00 > DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s unlimited, L1 unlimited > ExtTag- RBE- FLReset- > DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported- > RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- > MaxPayload 128 bytes, MaxReadReq 128 bytes > DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend- > LnkCap: Port #2, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 > <256ns, L1 <4us > ClockPM- Surprise- LLActRep+ BwNot- > LnkCtl: ASPM L0s L1 Enabled; RCB 64 bytes Disabled- Retrain- CommClk+ > ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- > LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive+ > BWMgmt- ABWMgmt- > SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ > Slot #3, PowerLimit 6.500W; Interlock- NoCompl- > SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg- > Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock- > SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock- > Changed: MRL- PresDet+ LinkState+ > RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible- > RootCap: CRSVisible- > RootSta: PME ReqID 0000, PMEStatus- PMEPending- > Capabilities: [80] MSI: Enable+ Count=1/1 Maskable- 64bit- > Address: fee0300c Data: 41a1 > Capabilities: [90] Subsystem: Sony Corporation Device 9026 > Capabilities: [a0] Power Management version 2 > Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+) > Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- > Capabilities: [100 v1] Virtual Channel > Caps: LPEVC=0 RefClk=100ns PATEntryBits=1 > Arb: Fixed+ WRR32- WRR64- WRR128- > Ctrl: ArbSelect=Fixed > Status: InProgress- > VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans- > Arb: Fixed+ WRR32- WRR64- WRR128- TWRR128- WRR256- > Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=01 > Status: NegoPending- InProgress- > VC1: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans- > Arb: Fixed+ WRR32- WRR64- WRR128- TWRR128- WRR256- > Ctrl: Enable- ID=0 ArbSelect=Fixed TC/VC=00 > Status: NegoPending- InProgress- > Capabilities: [180 v1] Root Complex Link > Desc: PortNumber=02 ComponentID=02 EltType=Config > Link0: Desc: TargetPort=00 TargetComponent=02 AssocRCRB- > LinkType=MemMapped LinkValid+ > Addr: 00000000fed1c001 > Kernel driver in use: pcieport > > 00:1d.0 USB controller: Intel Corporation NM10/ICH7 Family USB UHCI > Controller #1 (rev 02) (prog-if 00 [UHCI]) > Subsystem: Sony Corporation Device 9026 > Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR- FastB2B- DisINTx- > Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- > <TAbort- <MAbort- >SERR- <PERR- INTx- > Latency: 0 > Interrupt: pin A routed to IRQ 17 > Region 4: I/O ports at 1820 [size=32] > Kernel driver in use: uhci_hcd > > 00:1d.1 USB controller: Intel Corporation NM10/ICH7 Family USB UHCI > Controller #2 (rev 02) (prog-if 00 [UHCI]) > Subsystem: Sony Corporation Device 9026 > Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR- FastB2B- DisINTx- > Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- > <TAbort- <MAbort- >SERR- <PERR- INTx- > Latency: 0 > Interrupt: pin B routed to IRQ 19 > Region 4: I/O ports at 1840 [size=32] > Kernel driver in use: uhci_hcd > > 00:1d.2 USB controller: Intel Corporation NM10/ICH7 Family USB UHCI > Controller #3 (rev 02) (prog-if 00 [UHCI]) > Subsystem: Sony Corporation Device 9026 > Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR- FastB2B- DisINTx- > Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- > <TAbort- <MAbort- >SERR- <PERR- INTx- > Latency: 0 > Interrupt: pin C routed to IRQ 21 > Region 4: I/O ports at 1860 [size=32] > Kernel driver in use: uhci_hcd > > 00:1d.3 USB controller: Intel Corporation NM10/ICH7 Family USB UHCI > Controller #4 (rev 02) (prog-if 00 [UHCI]) > Subsystem: Sony Corporation Device 9026 > Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR- FastB2B- DisINTx- > Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- > <TAbort- <MAbort- >SERR- <PERR- INTx- > Latency: 0 > Interrupt: pin A routed to IRQ 17 > Region 4: I/O ports at 1880 [size=32] > Kernel driver in use: uhci_hcd > > 00:1d.7 USB controller: Intel Corporation NM10/ICH7 Family USB2 EHCI > Controller (rev 02) (prog-if 20 [EHCI]) > Subsystem: Sony Corporation Device 9026 > Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR- FastB2B- DisINTx- > Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- > <TAbort- <MAbort- >SERR- <PERR- INTx- > Latency: 0 > Interrupt: pin D routed to IRQ 23 > Region 0: Memory at f4544000 (32-bit, non-prefetchable) [size=1K] > Capabilities: [50] Power Management version 2 > Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+) > Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- > Capabilities: [58] Debug port: BAR=1 offset=00a0 > Kernel driver in use: ehci-pci > > 00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev e2) > (prog-if 01 [Subtractive decode]) > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR- FastB2B- DisINTx- > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- > <TAbort- <MAbort- >SERR- <PERR- INTx- > Latency: 0 > Bus: primary=00, secondary=07, subordinate=0b, sec-latency=32 > I/O behind bridge: 00004000-00004fff > Memory behind bridge: f4100000-f41fffff > Prefetchable memory behind bridge: 0000000080000000-0000000083ffffff > Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- > <TAbort- <MAbort+ <SERR- <PERR- > BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B- > PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- > Capabilities: [50] Subsystem: Sony Corporation Device 9026 > > 00:1f.0 ISA bridge: Intel Corporation 82801GBM (ICH7-M) LPC Interface > Bridge (rev 02) > Subsystem: Sony Corporation Device 9026 > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR- FastB2B- DisINTx- > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- > <TAbort- <MAbort- >SERR- <PERR- INTx- > Latency: 0 > Capabilities: [e0] Vendor Specific Information: Len=0c <?> > Kernel driver in use: lpc_ich > > 00:1f.1 IDE interface: Intel Corporation 82801G (ICH7 Family) IDE > Controller (rev 02) (prog-if 8a [Master SecP PriP]) > Subsystem: Sony Corporation Device 9026 > Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR- FastB2B- DisINTx- > Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- > <TAbort- <MAbort- >SERR- <PERR- INTx- > Latency: 0 > Interrupt: pin B routed to IRQ 22 > Region 0: I/O ports at 01f0 [size=8] > Region 1: I/O ports at 03f4 [size=1] > Region 2: I/O ports at 0170 [size=8] > Region 3: I/O ports at 0374 [size=1] > Region 4: I/O ports at 1810 [size=16] > Kernel driver in use: ata_piix > > 00:1f.3 SMBus: Intel Corporation NM10/ICH7 Family SMBus Controller (rev 02) > Subsystem: Sony Corporation Device 9026 > Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR- FastB2B- DisINTx- > Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- > <TAbort- <MAbort- >SERR- <PERR- INTx- > Region 4: I/O ports at 18a0 [size=32] > > 02:00.0 Network controller: Intel Corporation PRO/Wireless 4965 AG or > AGN [Kedron] Network Connection (rev 61) > Subsystem: Intel Corporation PRO/Wireless 4965 AG or AGN > Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR- FastB2B- DisINTx- > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- > <TAbort- <MAbort- >SERR- <PERR- INTx- > Latency: 0, Cache Line Size: 64 bytes > Interrupt: pin A routed to IRQ 43 > Region 0: Memory at f2000000 (64-bit, non-prefetchable) [size=8K] > Capabilities: [c8] Power Management version 3 > Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+) > Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- > Capabilities: [d0] MSI: Enable+ Count=1/1 Maskable- 64bit+ > Address: 00000000fee0200c Data: 41e1 > Capabilities: [e0] Express (v1) Endpoint, MSI 00 > DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <512ns, L1 unlimited > ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset- > DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported- > RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+ > MaxPayload 128 bytes, MaxReadReq 128 bytes > DevSta: CorrErr+ UncorrErr+ FatalErr- UnsuppReq+ AuxPwr+ TransPend- > LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 > <128ns, L1 <64us > ClockPM+ Surprise- LLActRep- BwNot- > LnkCtl: ASPM L0s Enabled; RCB 64 bytes Disabled- Retrain- CommClk+ > ExtSynch- ClockPM+ AutWidDis- BWInt- AutBWInt- > LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- > BWMgmt- ABWMgmt- > Capabilities: [100 v1] Advanced Error Reporting > UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- > MalfTLP- ECRC- UnsupReq+ ACSViol- > UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- > MalfTLP- ECRC- UnsupReq- ACSViol- > UESvrt: DLP+ SDES- TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ > MalfTLP+ ECRC- UnsupReq- ACSViol- > CESta: RxErr+ BadTLP- BadDLLP- Rollover- Timeout+ NonFatalErr+ > CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+ > AERCap: First Error Pointer: 14, GenCap- CGenEn- ChkCap- ChkEn- > Capabilities: [140 v1] Device Serial Number 00-13-e8-ff-ff-f6-74-7f > Kernel driver in use: iwl4965 > > 06:00.0 Ethernet controller: Marvell Technology Group Ltd. 88E8055 > PCI-E Gigabit Ethernet Controller (rev 13) > Subsystem: Sony Corporation Device 9026 > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR- FastB2B- DisINTx+ > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- > <TAbort- <MAbort- >SERR- <PERR- INTx- > Latency: 0, Cache Line Size: 64 bytes > Interrupt: pin A routed to IRQ 42 > Region 0: Memory at f4000000 (64-bit, non-prefetchable) [size=16K] > Region 2: I/O ports at 3000 [size=256] > [virtual] Expansion ROM at 84000000 [disabled] [size=128K] > Capabilities: [48] Power Management version 3 > Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+) > Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=1 PME- > Capabilities: [50] Vital Product Data > Product Name: Marvell Yukon 88E8055 Gigabit Ethernet Controller > Read-only fields: > [PN] Part number: Yukon 88E8055 > [EC] Engineering changes: Rev. 1.3 > [MN] Manufacture ID: 4d 61 72 76 65 6c 6c > [SN] Serial number: AbCdEfG58F16C > [CP] Extended capability: 01 10 cc 03 > [RV] Reserved: checksum good, 9 byte(s) reserved > Read/write fields: > [RW] Read-write area: 121 byte(s) free > End > Capabilities: [5c] MSI: Enable+ Count=1/1 Maskable- 64bit+ > Address: 00000000fee0300c Data: 41c1 > Capabilities: [e0] Express (v1) Legacy Endpoint, MSI 00 > DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s unlimited, L1 unlimited > ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset- > DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported- > RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- > MaxPayload 128 bytes, MaxReadReq 512 bytes > DevSta: CorrErr+ UncorrErr+ FatalErr- UnsuppReq+ AuxPwr+ TransPend- > LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 > <256ns, L1 unlimited > ClockPM+ Surprise- LLActRep- BwNot- > LnkCtl: ASPM L0s L1 Enabled; RCB 128 bytes Disabled- Retrain- CommClk+ > ExtSynch- ClockPM+ AutWidDis- BWInt- AutBWInt- > LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- > BWMgmt- ABWMgmt- > Capabilities: [100 v1] Advanced Error Reporting > UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- > MalfTLP- ECRC- UnsupReq- ACSViol- > UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- > MalfTLP- ECRC- UnsupReq- ACSViol- > UESvrt: DLP+ SDES- TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ > MalfTLP+ ECRC- UnsupReq- ACSViol- > CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+ > CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+ > AERCap: First Error Pointer: 1f, GenCap- CGenEn- ChkCap- ChkEn- > Kernel driver in use: sky2 > > 07:04.0 CardBus bridge: Ricoh Co Ltd RL5c476 II (rev ba) > Subsystem: Sony Corporation Device 9026 > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR- FastB2B- DisINTx- > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- > <TAbort- <MAbort- >SERR- <PERR- INTx- > Latency: 168 > Interrupt: pin A routed to IRQ 20 > Region 0: Memory at 88000000 (32-bit, non-prefetchable) [size=4K] > Bus: primary=07, secondary=08, subordinate=0b, sec-latency=176 > Memory window 0: 80000000-83ffffff (prefetchable) > Memory window 1: 8c000000-8fffffff > I/O window 0: 00004000-000040ff > I/O window 1: 00004400-000044ff > BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset- 16bInt+ PostWrite+ > 16-bit legacy interface ports at 0001 > Kernel driver in use: yenta_cardbus > > 07:04.1 FireWire (IEEE 1394): Ricoh Co Ltd R5C832 IEEE 1394 Controller > (rev 04) (prog-if 10 [OHCI]) > Subsystem: Sony Corporation Device 9026 > Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR- FastB2B- DisINTx- > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- > <TAbort- <MAbort- >SERR- <PERR- INTx- > Latency: 32 (500ns min, 1000ns max), Cache Line Size: 64 bytes > Interrupt: pin B routed to IRQ 21 > Region 0: Memory at f4100000 (32-bit, non-prefetchable) [size=2K] > Capabilities: [dc] Power Management version 2 > Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+) > Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=2 PME+ > Kernel driver in use: firewire_ohci > > 07:04.4 System peripheral: Ricoh Co Ltd R5C592 Memory Stick Bus Host > Adapter (rev 11) > Subsystem: Sony Corporation Device 9026 > Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR- FastB2B- DisINTx- > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- > <TAbort- <MAbort- >SERR- <PERR- INTx- > Latency: 32, Cache Line Size: 64 bytes > Interrupt: pin C routed to IRQ 22 > Region 0: Memory at f4100c00 (32-bit, non-prefetchable) [size=256] > Capabilities: [80] Power Management version 2 > Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+) > Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=2 PME- > Kernel driver in use: r592 > > > [7.6.] SCSI information (from /proc/scsi/scsi) > Attached devices: > Host: scsi0 Channel: 00 Id: 00 Lun: 00 > Vendor: ATA Model: MCBQE64GKMPQ-M1A Rev: 2.9. > Type: Direct-Access ANSI SCSI revision: 05 > > [8] > The link to the launchpad bug report is https://bugs.launchpad.net/bugs/1002570 -- To unsubscribe from this list: send the line "unsubscribe linux-mmc" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
