On 08/21/2015 03:30 PM, Shawn Lin wrote: > On 2015/8/21 14:27, Jaehoon Chung wrote: >> Hi, Shawn. >> >> Is this based on Ulf's repository? > > > no, it's based on "https://github.com/jh80chung/dw-mmc.git tags/dw-mmc-for-ulf-v4.2" ：） Oh..I will rebase to Ulf's next branch on this weekend. Then could you rebase this patch? And i added more comments at below.. :) Best Regards, Jaehoon Chung > >> >> On 08/20/2015 05:43 PM, Shawn Lin wrote: >>> DesignWare MMC Controller can supports two types of DMA >>> mode: external dma and internal dma. We get a RK312x platform >>> integrated dw_mmc and ARM pl330 dma controller. This patch add >>> edmac ops to support these platforms. I've tested it on RK31xx >>> platform with edmac mode and RK3288 platform with idmac mode. >>> >>> Signed-off-by: Shawn Lin <shawn.lin@xxxxxxxxxxxxxx> >>> >>> --- >>> >>> Changes in v6: >>> - add trans_mode condition for IDMAC initialization >>> suggested by Heiko >>> - re-test my patch on rk3188 platform and update commit msg >>> - update performance of pio vs edmac in cover letter >>> >>> Changes in v5: >>> - add the title of cover letter >>> - fix typo of comment >>> - add macro for reading HCON register >>> - add "Acked-by: Krzysztof Kozlowski <k.kozlowski@xxxxxxxxxxx>" for exynos_defconfig patch >>> - add "Acked-by: Vineet Gupta <vgupta@xxxxxxxxxxxx>" for axs10x_defconfig patch >>> - add "Acked-by: Govindraj Raja <govindraj.raja@xxxxxxxxxx>" and >>> "Acked-by: Ralf Baechle <ralf@xxxxxxxxxxxxxx>" for pistachio_defconfig patch >>> - add "Acked-by: Joachim Eastwood <manabian@xxxxxxxxx>" for lpc18xx_defconfig patch >>> - add "Acked-by: Wei Xu <xuwei5@xxxxxxxxxxxxx>" for hisi_defconfig patch >>> - rebase on "https://github.com/jh80chung/dw-mmc.git tags/dw-mmc-for-ulf-v4.2" for merging easily >>> >>> Changes in v4: >>> - remove "host->trans_mode" and use "host->use_dma" to indicate >>> transfer mode. >>> - remove all bt-bindings' changes since we don't need new properities. >>> - check transfer mode at runtime by reading HCON reg >>> - spilt defconfig changes for each sub-architecture >>> - fix the title of cover letter >>> - reuse some code for reducing code size >>> >>> Changes in v3: >>> - choose transfer mode at runtime >>> - remove all CONFIG_MMC_DW_IDMAC config option >>> - add supports-idmac property for some platforms >>> >>> Changes in v2: >>> - Fix typo of dev_info msg >>> - remove unused dmach from declaration of dw_mci_dma_slave >>> >>> drivers/mmc/host/Kconfig | 11 +- >>> drivers/mmc/host/dw_mmc-pltfm.c | 2 + >>> drivers/mmc/host/dw_mmc.c | 264 ++++++++++++++++++++++++++++++++-------- >>> drivers/mmc/host/dw_mmc.h | 5 + >>> include/linux/mmc/dw_mmc.h | 27 +++- >>> 5 files changed, 242 insertions(+), 67 deletions(-) >>> >>> diff --git a/drivers/mmc/host/Kconfig b/drivers/mmc/host/Kconfig >>> index 6a0f9c7..a86c0eb 100644 >>> --- a/drivers/mmc/host/Kconfig >>> +++ b/drivers/mmc/host/Kconfig >>> @@ -607,15 +607,7 @@ config MMC_DW >>> help >>> This selects support for the Synopsys DesignWare Mobile Storage IP >>> block, this provides host support for SD and MMC interfaces, in both >>> - PIO and external DMA modes. >>> - >>> -config MMC_DW_IDMAC >>> - bool "Internal DMAC interface" >>> - depends on MMC_DW >>> - help >>> - This selects support for the internal DMAC block within the Synopsys >>> - Designware Mobile Storage IP block. This disables the external DMA >>> - interface. >>> + PIO, internal DMA mode and external DMA modes. >>> >>> config MMC_DW_PLTFM >>> tristate "Synopsys Designware MCI Support as platform device" >>> @@ -644,7 +636,6 @@ config MMC_DW_K3 >>> tristate "K3 specific extensions for Synopsys DW Memory Card Interface" >>> depends on MMC_DW >>> select MMC_DW_PLTFM >>> - select MMC_DW_IDMAC >>> help >>> This selects support for Hisilicon K3 SoC specific extensions to the >>> Synopsys DesignWare Memory Card Interface driver. Select this option >>> diff --git a/drivers/mmc/host/dw_mmc-pltfm.c b/drivers/mmc/host/dw_mmc-pltfm.c >>> index ec6dbcd..7e1d13b 100644 >>> --- a/drivers/mmc/host/dw_mmc-pltfm.c >>> +++ b/drivers/mmc/host/dw_mmc-pltfm.c >>> @@ -59,6 +59,8 @@ int dw_mci_pltfm_register(struct platform_device *pdev, >>> host->pdata = pdev->dev.platform_data; >>> >>> regs = platform_get_resource(pdev, IORESOURCE_MEM, 0); >>> + /* Get registers' physical base address */ >>> + host->phy_regs = (void *)(regs->start); >>> host->regs = devm_ioremap_resource(&pdev->dev, regs); >>> if (IS_ERR(host->regs)) >>> return PTR_ERR(host->regs); >> >> Is this board specific code? If so, separate the patch. >> >>> diff --git a/drivers/mmc/host/dw_mmc.c b/drivers/mmc/host/dw_mmc.c >>> index fcbf552..f943619 100644 >>> --- a/drivers/mmc/host/dw_mmc.c >>> +++ b/drivers/mmc/host/dw_mmc.c >>> @@ -56,7 +56,6 @@ >>> #define DW_MCI_FREQ_MAX 200000000 /* unit: HZ */ >>> #define DW_MCI_FREQ_MIN 400000 /* unit: HZ */ >>> >>> -#ifdef CONFIG_MMC_DW_IDMAC >>> #define IDMAC_INT_CLR (SDMMC_IDMAC_INT_AI | SDMMC_IDMAC_INT_NI | \ >>> SDMMC_IDMAC_INT_CES | SDMMC_IDMAC_INT_DU | \ >>> SDMMC_IDMAC_INT_FBE | SDMMC_IDMAC_INT_RI | \ >>> @@ -102,7 +101,6 @@ struct idmac_desc { >>> >>> /* Each descriptor can transfer up to 4KB of data in chained mode */ >>> #define DW_MCI_DESC_DATA_LENGTH 0x1000 >>> -#endif /* CONFIG_MMC_DW_IDMAC */ >>> >>> static bool dw_mci_reset(struct dw_mci *host); >>> static bool dw_mci_ctrl_reset(struct dw_mci *host, u32 reset); >>> @@ -407,7 +405,6 @@ static int dw_mci_get_dma_dir(struct mmc_data *data) >>> return DMA_FROM_DEVICE; >>> } >>> >>> -#ifdef CONFIG_MMC_DW_IDMAC >>> static void dw_mci_dma_cleanup(struct dw_mci *host) >>> { >>> struct mmc_data *data = host->data; >>> @@ -445,12 +442,21 @@ static void dw_mci_idmac_stop_dma(struct dw_mci *host) >>> mci_writel(host, BMOD, temp); >>> } >>> >>> -static void dw_mci_idmac_complete_dma(struct dw_mci *host) >>> +static void dw_mci_dmac_complete_dma(void *arg) >>> { >>> + struct dw_mci *host = arg; >>> struct mmc_data *data = host->data; >>> >>> dev_vdbg(host->dev, "DMA complete\n"); >>> >>> + if (host->use_dma == TRANS_MODE_EDMAC) >>> + if (data && (data->flags & MMC_DATA_READ)) >> >> Combine one condition. >> >>> + /* Invalidate cache after read */ >>> + dma_sync_sg_for_cpu(mmc_dev(host->cur_slot->mmc), >>> + data->sg, >>> + data->sg_len, >>> + DMA_FROM_DEVICE); >>> + >>> host->dma_ops->cleanup(host); >>> >>> /* >>> @@ -564,7 +570,7 @@ static void dw_mci_translate_sglist(struct dw_mci *host, struct mmc_data *data, >>> wmb(); /* drain writebuffer */ >>> } >>> >>> -static void dw_mci_idmac_start_dma(struct dw_mci *host, unsigned int sg_len) >>> +static int dw_mci_idmac_start_dma(struct dw_mci *host, unsigned int sg_len) >>> { >>> u32 temp; >>> >>> @@ -589,6 +595,8 @@ static void dw_mci_idmac_start_dma(struct dw_mci *host, unsigned int sg_len) >>> >>> /* Start it running */ >>> mci_writel(host, PLDMND, 1); >>> + >>> + return 0; >>> } >>> >>> static int dw_mci_idmac_init(struct dw_mci *host) >>> @@ -669,10 +677,112 @@ static const struct dw_mci_dma_ops dw_mci_idmac_ops = { >>> .init = dw_mci_idmac_init, >>> .start = dw_mci_idmac_start_dma, >>> .stop = dw_mci_idmac_stop_dma, >>> - .complete = dw_mci_idmac_complete_dma, >>> + .complete = dw_mci_dmac_complete_dma, >>> + .cleanup = dw_mci_dma_cleanup, >>> +}; >>> + >>> +static void dw_mci_edmac_stop_dma(struct dw_mci *host) >>> +{ >>> + dmaengine_terminate_all(host->dms->ch); >>> +} >>> + >>> +static int dw_mci_edmac_start_dma(struct dw_mci *host, >>> + unsigned int sg_len) >>> +{ >>> + struct dma_slave_config cfg; >>> + struct dma_async_tx_descriptor *desc = NULL; >>> + struct scatterlist *sgl = host->data->sg; >>> + const u32 mszs[] = {1, 4, 8, 16, 32, 64, 128, 256}; >>> + u32 sg_elems = host->data->sg_len; >>> + u32 fifoth_val; >>> + u32 fifo_offset = host->fifo_reg - host->regs; >>> + int ret = 0; >>> + >>> + /* Set external dma config: burst size, burst width */ >>> + cfg.dst_addr = (dma_addr_t)(host->phy_regs + fifo_offset); >> >> host->phy_regs is not assigned? >> >>> + cfg.src_addr = cfg.dst_addr; >>> + cfg.dst_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES; >>> + cfg.src_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES; >>> + >>> + /* Match burst msize with external dma config */ >>> + fifoth_val = mci_readl(host, FIFOTH); >>> + cfg.dst_maxburst = mszs[(fifoth_val >> 28) & 0x7]; >>> + cfg.src_maxburst = cfg.dst_maxburst; >>> + >>> + if (host->data->flags & MMC_DATA_WRITE) >>> + cfg.direction = DMA_MEM_TO_DEV; >>> + else /* MMC_DATA_READ */ >>> + cfg.direction = DMA_DEV_TO_MEM; >>> + >>> + ret = dmaengine_slave_config(host->dms->ch, &cfg); >>> + if (ret) { >>> + dev_err(host->dev, "Failed to config edmac.\n"); >>> + return -EBUSY; >>> + } >>> + >>> + desc = dmaengine_prep_slave_sg(host->dms->ch, sgl, >>> + sg_len, cfg.direction, >>> + DMA_PREP_INTERRUPT | DMA_CTRL_ACK); >>> + if (!desc) { >>> + dev_err(host->dev, "Can't prepare slave sg.\n"); >>> + return -EBUSY; >>> + } >>> + >>> + /* Set dw_mci_dmac_complete_dma as callback */ >>> + desc->callback = dw_mci_dmac_complete_dma; >>> + desc->callback_param = (void *)host; >>> + dmaengine_submit(desc); >>> + >>> + /* Flush cache before write */ >>> + if (host->data->flags & MMC_DATA_WRITE) >>> + dma_sync_sg_for_device(mmc_dev(host->cur_slot->mmc), sgl, >>> + sg_elems, DMA_TO_DEVICE); >>> + >>> + dma_async_issue_pending(host->dms->ch); >>> + >>> + return 0; >>> +} >>> + >>> +static int dw_mci_edmac_init(struct dw_mci *host) >>> +{ >>> + /* Request external dma channel */ >>> + host->dms = kzalloc(sizeof(struct dw_mci_dma_slave), GFP_KERNEL); >>> + if (!host->dms) >>> + return -ENOMEM; >>> + >>> + host->dms->ch = dma_request_slave_channel(host->dev, "rx-tx"); >>> + if (!host->dms->ch) { >>> + dev_err(host->dev, >>> + "Failed to get external DMA channel %d\n", >>> + host->dms->ch->chan_id); >>> + kfree(host->dms); >>> + host->dms = NULL; >>> + return -ENXIO; >>> + } >>> + >>> + return 0; >>> +} >>> + >>> +static void dw_mci_edmac_exit(struct dw_mci *host) >>> +{ >>> + if (host->dms) { >>> + if (host->dms->ch) { >>> + dma_release_channel(host->dms->ch); >>> + host->dms->ch = NULL; >>> + } >>> + kfree(host->dms); >>> + host->dms = NULL; >>> + } >>> +} >>> + >>> +static const struct dw_mci_dma_ops dw_mci_edmac_ops = { >>> + .init = dw_mci_edmac_init, >>> + .exit = dw_mci_edmac_exit, >>> + .start = dw_mci_edmac_start_dma, >>> + .stop = dw_mci_edmac_stop_dma, >>> + .complete = dw_mci_dmac_complete_dma, >>> .cleanup = dw_mci_dma_cleanup, >>> }; >>> -#endif /* CONFIG_MMC_DW_IDMAC */ >>> >>> static int dw_mci_pre_dma_transfer(struct dw_mci *host, >>> struct mmc_data *data, >>> @@ -752,7 +862,6 @@ static void dw_mci_post_req(struct mmc_host *mmc, >>> >>> static void dw_mci_adjust_fifoth(struct dw_mci *host, struct mmc_data *data) >>> { >>> -#ifdef CONFIG_MMC_DW_IDMAC >>> unsigned int blksz = data->blksz; >>> const u32 mszs[] = {1, 4, 8, 16, 32, 64, 128, 256}; >>> u32 fifo_width = 1 << host->data_shift; >>> @@ -760,6 +869,10 @@ static void dw_mci_adjust_fifoth(struct dw_mci *host, struct mmc_data *data) >>> u32 msize = 0, rx_wmark = 1, tx_wmark, tx_wmark_invers; >>> int idx = ARRAY_SIZE(mszs) - 1; >>> >>> + /* pio should ship this scenario */ >>> + if (!host->use_dma) >>> + return; >>> + >>> tx_wmark = (host->fifo_depth) / 2; >>> tx_wmark_invers = host->fifo_depth - tx_wmark; >>> >>> @@ -788,7 +901,6 @@ static void dw_mci_adjust_fifoth(struct dw_mci *host, struct mmc_data *data) >>> done: >>> fifoth_val = SDMMC_SET_FIFOTH(msize, rx_wmark, tx_wmark); >>> mci_writel(host, FIFOTH, fifoth_val); >>> -#endif >>> } >>> >>> static void dw_mci_ctrl_rd_thld(struct dw_mci *host, struct mmc_data *data) >>> @@ -850,10 +962,12 @@ static int dw_mci_submit_data_dma(struct dw_mci *host, struct mmc_data *data) >>> >>> host->using_dma = 1; >>> >>> - dev_vdbg(host->dev, >>> - "sd sg_cpu: %#lx sg_dma: %#lx sg_len: %d\n", >>> - (unsigned long)host->sg_cpu, (unsigned long)host->sg_dma, >>> - sg_len); >>> + if (host->use_dma == TRANS_MODE_IDMAC) >>> + dev_vdbg(host->dev, >>> + "sd sg_cpu: %#lx sg_dma: %#lx sg_len: %d\n", >>> + (unsigned long)host->sg_cpu, >>> + (unsigned long)host->sg_dma, >>> + sg_len); >>> >>> /* >>> * Decide the MSIZE and RX/TX Watermark. >>> @@ -875,7 +989,11 @@ static int dw_mci_submit_data_dma(struct dw_mci *host, struct mmc_data *data) >>> mci_writel(host, INTMASK, temp); >>> spin_unlock_irqrestore(&host->irq_lock, irqflags); >>> >>> - host->dma_ops->start(host, sg_len); >>> + if (host->dma_ops->start(host, sg_len)) { >>> + /* We can't do DMA */ >>> + dev_err(host->dev, "%s: failed to start DMA.\n", __func__); >>> + return -ENODEV; >>> + } >>> >>> return 0; >>> } >>> @@ -2343,15 +2461,17 @@ static irqreturn_t dw_mci_interrupt(int irq, void *dev_id) >>> >>> } >>> >>> -#ifdef CONFIG_MMC_DW_IDMAC >>> - /* Handle DMA interrupts */ >>> + if (host->use_dma != TRANS_MODE_IDMAC) >>> + return IRQ_HANDLED; >>> + >>> + /* Handle IDMA interrupts */ >>> if (host->dma_64bit_address == 1) { >>> pending = mci_readl(host, IDSTS64); >>> if (pending & (SDMMC_IDMAC_INT_TI | SDMMC_IDMAC_INT_RI)) { >>> mci_writel(host, IDSTS64, SDMMC_IDMAC_INT_TI | >>> SDMMC_IDMAC_INT_RI); >>> mci_writel(host, IDSTS64, SDMMC_IDMAC_INT_NI); >>> - host->dma_ops->complete(host); >>> + host->dma_ops->complete((void *)host); >>> } >>> } else { >>> pending = mci_readl(host, IDSTS); >>> @@ -2359,10 +2479,9 @@ static irqreturn_t dw_mci_interrupt(int irq, void *dev_id) >>> mci_writel(host, IDSTS, SDMMC_IDMAC_INT_TI | >>> SDMMC_IDMAC_INT_RI); >>> mci_writel(host, IDSTS, SDMMC_IDMAC_INT_NI); >>> - host->dma_ops->complete(host); >>> + host->dma_ops->complete((void *)host); >>> } >>> } >>> -#endif >>> >>> return IRQ_HANDLED; >>> } >>> @@ -2471,13 +2590,21 @@ static int dw_mci_init_slot(struct dw_mci *host, unsigned int id) >>> goto err_host_allocated; >>> >>> /* Useful defaults if platform data is unset. */ >>> - if (host->use_dma) { >>> + if (host->use_dma == TRANS_MODE_IDMAC) { >>> mmc->max_segs = host->ring_size; >>> mmc->max_blk_size = 65536; >>> mmc->max_seg_size = 0x1000; >>> mmc->max_req_size = mmc->max_seg_size * host->ring_size; >>> mmc->max_blk_count = mmc->max_req_size / 512; >>> + } else if (host->use_dma == TRANS_MODE_EDMAC) { >>> + mmc->max_segs = 64; >>> + mmc->max_blk_size = 65536; >>> + mmc->max_blk_count = 65535; >>> + mmc->max_req_size = >>> + mmc->max_blk_size * mmc->max_blk_count; >>> + mmc->max_seg_size = mmc->max_req_size; >> >> Fix the indention >> >>> } else { >>> + /* TRANS_MODE_PIO */ >>> mmc->max_segs = 64; >>> mmc->max_blk_size = 65536; /* BLKSIZ is 16 bits */ >>> mmc->max_blk_count = 512; >>> @@ -2517,35 +2644,66 @@ static void dw_mci_cleanup_slot(struct dw_mci_slot *slot, unsigned int id) >>> static void dw_mci_init_dma(struct dw_mci *host) >>> { >>> int addr_config; >>> - /* Check ADDR_CONFIG bit in HCON to find IDMAC address bus width */ >>> - addr_config = (mci_readl(host, HCON) >> 27) & 0x01; >>> - >>> - if (addr_config == 1) { >>> - /* host supports IDMAC in 64-bit address mode */ >>> - host->dma_64bit_address = 1; >>> - dev_info(host->dev, "IDMAC supports 64-bit address mode.\n"); >>> - if (!dma_set_mask(host->dev, DMA_BIT_MASK(64))) >>> - dma_set_coherent_mask(host->dev, DMA_BIT_MASK(64)); >>> - } else { >>> - /* host supports IDMAC in 32-bit address mode */ >>> - host->dma_64bit_address = 0; >>> - dev_info(host->dev, "IDMAC supports 32-bit address mode.\n"); >>> - } >>> + int trans_mode; >>> + struct device *dev = host->dev; >>> + struct device_node *np = dev->of_node; >>> >>> - /* Alloc memory for sg translation */ >>> - host->sg_cpu = dmam_alloc_coherent(host->dev, PAGE_SIZE, >>> - &host->sg_dma, GFP_KERNEL); >>> - if (!host->sg_cpu) { >>> - dev_err(host->dev, "%s: could not alloc DMA memory\n", >>> - __func__); >>> + /* Check tansfer mode */ >>> + trans_mode = SDMMC_GET_TRANS_MODE(mci_readl(host, HCON)); >>> + if (trans_mode == 0) { >>> + trans_mode = TRANS_MODE_IDMAC; >>> + } else if (trans_mode == 1 || trans_mode == 2) { >>> + trans_mode = TRANS_MODE_EDMAC; >>> + } else { >>> + trans_mode = TRANS_MODE_PIO; >> >> what are trans_mode "0, 1, 2"? >> (00 - none) is NO-DMA interface, isn't? is it IDMAC mode? >> >>> goto no_dma; >>> } >>> >>> /* Determine which DMA interface to use */ >>> -#ifdef CONFIG_MMC_DW_IDMAC >>> - host->dma_ops = &dw_mci_idmac_ops; >>> - dev_info(host->dev, "Using internal DMA controller.\n"); >>> -#endif >>> + if (trans_mode == TRANS_MODE_IDMAC) { >>> + /* >>> + * Check ADDR_CONFIG bit in HCON to find >>> + * IDMAC address bus width >>> + */ >>> + addr_config = SDMMC_GET_ADDR_CONFIG(mci_readl(host, HCON)); >>> + >>> + if (addr_config == 1) { >>> + /* host supports IDMAC in 64-bit address mode */ >>> + host->dma_64bit_address = 1; >>> + dev_info(host->dev, >>> + "IDMAC supports 64-bit address mode.\n"); >>> + if (!dma_set_mask(host->dev, DMA_BIT_MASK(64))) >>> + dma_set_coherent_mask(host->dev, >>> + DMA_BIT_MASK(64)); >>> + } else { >>> + /* host supports IDMAC in 32-bit address mode */ >>> + host->dma_64bit_address = 0; >>> + dev_info(host->dev, >>> + "IDMAC supports 32-bit address mode.\n"); >>> + } >>> + >>> + /* Alloc memory for sg translation */ >>> + host->sg_cpu = dmam_alloc_coherent(host->dev, PAGE_SIZE, >>> + &host->sg_dma, GFP_KERNEL); >>> + if (!host->sg_cpu) { >>> + dev_err(host->dev, >>> + "%s: could not alloc DMA memory\n", >>> + __func__); >>> + goto no_dma; >>> + } >>> + >>> + host->dma_ops = &dw_mci_idmac_ops; >>> + dev_info(host->dev, "Using internal DMA controller.\n"); >>> + } else { >>> + /* TRANS_MODE_EDMAC: check dma bindings again */ >>> + if ((of_property_count_strings(np, "dma-names") < 0) || >>> + (!of_find_property(np, "dmas", NULL))) { >>> + trans_mode = TRANS_MODE_PIO; >>> + goto no_dma; >>> + } >>> + host->dma_ops = &dw_mci_edmac_ops; >>> + dev_info(host->dev, "Using external DMA controller.\n"); >>> + } >>> >>> if (!host->dma_ops) >>> goto no_dma; >>> @@ -2562,12 +2720,12 @@ static void dw_mci_init_dma(struct dw_mci *host) >>> goto no_dma; >>> } >>> >>> - host->use_dma = 1; >>> + host->use_dma = trans_mode; >> >> Also confuse, if trans_mode is assigned host->use_dma, can mode value be directly assigned to host->use_dma? >> >> trans_mode = TRAMS_MODE_PIO; >> host->use_dma = trans_mode; >> >> -> host->use_dma = TRAMS_MODE_PIO; >> >> Then trans_mode can be removed. >> >>> return; >>> >>> no_dma: >>> dev_info(host->dev, "Using PIO mode.\n"); >>> - host->use_dma = 0; >>> + host->use_dma = trans_mode; >>> } >>> >>> static bool dw_mci_ctrl_reset(struct dw_mci *host, u32 reset) >>> @@ -2650,10 +2808,9 @@ static bool dw_mci_reset(struct dw_mci *host) >>> } >>> } >>> >>> -#if IS_ENABLED(CONFIG_MMC_DW_IDMAC) >>> - /* It is also recommended that we reset and reprogram idmac */ >>> - dw_mci_idmac_reset(host); >>> -#endif >>> + if (host->use_dma == TRANS_MODE_IDMAC) >>> + /* It is also recommended that we reset and reprogram idmac */ >>> + dw_mci_idmac_reset(host); >>> >>> ret = true; >>> >>> @@ -2890,7 +3047,7 @@ int dw_mci_probe(struct dw_mci *host) >>> * Get the host data width - this assumes that HCON has been set with >>> * the correct values. >>> */ >>> - i = (mci_readl(host, HCON) >> 7) & 0x7; >>> + i = SDMMC_GET_HDATA_WIDTH(mci_readl(host, HCON)); >> >> This is not related with supporting external dma interface. >> Separate this. >> >>> if (!i) { >>> host->push_data = dw_mci_push_data16; >>> host->pull_data = dw_mci_pull_data16; >>> @@ -2972,7 +3129,7 @@ int dw_mci_probe(struct dw_mci *host) >>> if (host->pdata->num_slots) >>> host->num_slots = host->pdata->num_slots; >>> else >>> - host->num_slots = ((mci_readl(host, HCON) >> 1) & 0x1F) + 1; >>> + host->num_slots = SDMMC_GET_SLOT_NUM(mci_readl(host, HCON)); >> >> Ditto. (with above.) >> >>> >>> /* >>> * Enable interrupts for command done, data over, data empty, >>> @@ -3067,6 +3224,9 @@ EXPORT_SYMBOL(dw_mci_remove); >>> */ >>> int dw_mci_suspend(struct dw_mci *host) >>> { >>> + if (host->use_dma && host->dma_ops->exit) >>> + host->dma_ops->exit(host); >>> + >>> return 0; >>> } >>> EXPORT_SYMBOL(dw_mci_suspend); >>> diff --git a/drivers/mmc/host/dw_mmc.h b/drivers/mmc/host/dw_mmc.h >>> index 8ce4674..c453e94 100644 >>> --- a/drivers/mmc/host/dw_mmc.h >>> +++ b/drivers/mmc/host/dw_mmc.h >>> @@ -148,6 +148,11 @@ >>> #define SDMMC_SET_FIFOTH(m, r, t) (((m) & 0x7) << 28 | \ >>> ((r) & 0xFFF) << 16 | \ >>> ((t) & 0xFFF)) >>> +/* HCON register defines */ >>> +#define SDMMC_GET_SLOT_NUM(x) ((((x)>>1) & 0x1F) + 1) >>> +#define SDMMC_GET_HDATA_WIDTH(x) (((x)>>7) & 0x7) >>> +#define SDMMC_GET_TRANS_MODE(x) (((x)>>16) & 0x3) >>> +#define SDMMC_GET_ADDR_CONFIG(x) (((x)>>27) & 0x1) >>> /* Internal DMAC interrupt defines */ >>> #define SDMMC_IDMAC_INT_AI BIT(9) >>> #define SDMMC_IDMAC_INT_NI BIT(8) >>> diff --git a/include/linux/mmc/dw_mmc.h b/include/linux/mmc/dw_mmc.h >>> index c846f42..6a2b83c 100644 >>> --- a/include/linux/mmc/dw_mmc.h >>> +++ b/include/linux/mmc/dw_mmc.h >>> @@ -16,6 +16,7 @@ >>> >>> #include <linux/scatterlist.h> >>> #include <linux/mmc/core.h> >>> +#include <linux/dmaengine.h> >>> >>> #define MAX_MCI_SLOTS 2 >>> >>> @@ -40,6 +41,17 @@ enum { >>> >>> struct mmc_data; >>> >>> +enum { >>> + TRANS_MODE_PIO = 0, >>> + TRANS_MODE_IDMAC, >>> + TRANS_MODE_EDMAC >>> +}; >>> + >>> +struct dw_mci_dma_slave { >>> + struct dma_chan *ch; >>> + enum dma_transfer_direction direction; >>> +}; >>> + >>> /** >>> * struct dw_mci - MMC controller state shared between all slots >>> * @lock: Spinlock protecting the queue and associated data. >>> @@ -154,11 +166,16 @@ struct dw_mci { >>> dma_addr_t sg_dma; >>> void *sg_cpu; >>> const struct dw_mci_dma_ops *dma_ops; >>> -#ifdef CONFIG_MMC_DW_IDMAC >>> + /* For idmac */ >>> unsigned int ring_size; >>> -#else >>> + >>> + /* For edmac */ >>> + struct dw_mci_dma_slave *dms; >>> + /* Registers's physical base address */ >>> + void *phy_regs; >>> + >>> struct dw_mci_dma_data *dma_data; >>> -#endif >>> + >> >> On ulf's repository, this point should be conflicted. >> >> Best Regards, >> Jaehoon Chung >> >>> u32 cmd_status; >>> u32 data_status; >>> u32 stop_cmdr; >>> @@ -212,8 +229,8 @@ struct dw_mci { >>> struct dw_mci_dma_ops { >>> /* DMA Ops */ >>> int (*init)(struct dw_mci *host); >>> - void (*start)(struct dw_mci *host, unsigned int sg_len); >>> - void (*complete)(struct dw_mci *host); >>> + int (*start)(struct dw_mci *host, unsigned int sg_len); >>> + void (*complete)(void *host); >>> void (*stop)(struct dw_mci *host); >>> void (*cleanup)(struct dw_mci *host); >>> void (*exit)(struct dw_mci *host); >>> >> >> >> >> > > -- To unsubscribe from this list: send the line "unsubscribe linux-mmc" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
