On 30 April 2015 at 14:32, Ben Hutchings <ben.hutchings@xxxxxxxxxxxxxxx> wrote:
> Implement voltage switch, supporting modes up to SDR-50.
>
> Based on work by Shinobu Uehara, Rob Taylor, William Towle and Ian Molton.
>
> This uses two voltage regulators, one external and one on the pfc.
Why two? If there is a parent child relation ship, that should be
handled through the regulator tree, right!? Please elaborate.
Kind regards
Uffe
>
> Signed-off-by: Ben Hutchings <ben.hutchings@xxxxxxxxxxxxxxx>
> ---
> drivers/mmc/host/sh_mobile_sdhi.c | 48 +++++++++++++++++++++++++++++++++++++
> 1 file changed, 48 insertions(+)
>
> diff --git a/drivers/mmc/host/sh_mobile_sdhi.c b/drivers/mmc/host/sh_mobile_sdhi.c
> index 92a58c6007fe..c8538a256e22 100644
> --- a/drivers/mmc/host/sh_mobile_sdhi.c
> +++ b/drivers/mmc/host/sh_mobile_sdhi.c
> @@ -30,6 +30,7 @@
> #include <linux/mfd/tmio.h>
> #include <linux/sh_dma.h>
> #include <linux/delay.h>
> +#include <linux/regulator/consumer.h>
>
> #include "tmio_mmc.h"
>
> @@ -84,6 +85,7 @@ MODULE_DEVICE_TABLE(of, sh_mobile_sdhi_of_match);
>
> struct sh_mobile_sdhi {
> struct clk *clk;
> + struct regulator *vqmmc_ref;
> struct tmio_mmc_data mmc_data;
> struct tmio_mmc_dma dma_priv;
> };
> @@ -148,6 +150,41 @@ static void sh_mobile_sdhi_set_clk_div(struct platform_device *pdev, int clk)
> }
> }
>
> +static int sh_mobile_sdhi_start_signal_voltage_switch(
> + struct tmio_mmc_host *host, unsigned char signal_voltage)
> +{
> + struct sh_mobile_sdhi *priv = host_to_priv(host);
> + int min_uV, max_uV;
> + int ret;
> +
> + if (signal_voltage == MMC_SIGNAL_VOLTAGE_330) {
> + min_uV = 2700000;
> + max_uV = 3600000;
> + } else if (signal_voltage == MMC_SIGNAL_VOLTAGE_180) {
> + min_uV = 1700000;
> + max_uV = 1950000;
> + } else {
> + return -EINVAL;
> + }
> +
> + if (!IS_ERR(host->mmc->supply.vqmmc)) {
> + ret = regulator_set_voltage(host->mmc->supply.vqmmc,
> + min_uV, max_uV);
> + if (ret)
> + return ret;
> + }
> +
> + if (!IS_ERR(priv->vqmmc_ref)) {
> + ret = regulator_set_voltage(priv->vqmmc_ref,
> + min_uV, max_uV);
> + if (ret)
> + return ret;
> + }
> +
> + usleep_range(5000, 5500);
> + return 0;
> +}
> +
> static int sh_mobile_sdhi_wait_idle(struct tmio_mmc_host *host)
> {
> int timeout = 1000;
> @@ -240,6 +277,13 @@ static int sh_mobile_sdhi_probe(struct platform_device *pdev)
> goto eprobe;
> }
>
> + priv->vqmmc_ref = devm_regulator_get_optional(&pdev->dev, "vqmmc-ref");
> + if (IS_ERR(priv->vqmmc_ref)) {
> + if (PTR_ERR(priv->vqmmc_ref) == -EPROBE_DEFER)
> + return -EPROBE_DEFER;
> + dev_info(&pdev->dev, "No vqmmc reference regulator found\n");
> + }
> +
> host = tmio_mmc_host_alloc(pdev);
> if (!host) {
> ret = -ENOMEM;
> @@ -253,6 +297,10 @@ static int sh_mobile_sdhi_probe(struct platform_device *pdev)
> host->clk_enable = sh_mobile_sdhi_clk_enable;
> host->clk_disable = sh_mobile_sdhi_clk_disable;
> host->multi_io_quirk = sh_mobile_sdhi_multi_io_quirk;
> +
> + host->start_signal_voltage_switch
> + = sh_mobile_sdhi_start_signal_voltage_switch;
> +
> /* SD control register space size is 0x100, 0x200 for bus_shift=1 */
> if (resource_size(res) > 0x100)
> host->bus_shift = 1;
> --
> 1.7.10.4
>
>
>
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-mmc" in
> the body of a message to majordomo@xxxxxxxxxxxxxxx
> More majordomo info at http://vger.kernel.org/majordomo-info.html
--
To unsubscribe from this list: send the line "unsubscribe linux-mmc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
