Re: [PATCH V6 08/15] mmc: mmc: Hold re-tuning if the card is put to sleep

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 21/04/15 12:42, Ulf Hansson wrote:
> On 20 April 2015 at 14:09, Adrian Hunter <adrian.hunter@xxxxxxxxx> wrote:
>> Currently "mmc sleep" is used before power off and
>> is not paired with waking up. Nevertheless hold
>> re-tuning.
>>
>> Signed-off-by: Adrian Hunter <adrian.hunter@xxxxxxxxx>
>> ---
>>  drivers/mmc/core/mmc.c | 14 +++++++++++---
>>  1 file changed, 11 insertions(+), 3 deletions(-)
>>
>> diff --git a/drivers/mmc/core/mmc.c b/drivers/mmc/core/mmc.c
>> index f36c76f..daf9954 100644
>> --- a/drivers/mmc/core/mmc.c
>> +++ b/drivers/mmc/core/mmc.c
>> @@ -21,6 +21,7 @@
>>  #include <linux/mmc/mmc.h>
>>
>>  #include "core.h"
>> +#include "host.h"
>>  #include "bus.h"
>>  #include "mmc_ops.h"
>>  #include "sd_ops.h"
>> @@ -1504,6 +1505,7 @@ static int mmc_can_sleep(struct mmc_card *card)
>>         return (card && card->ext_csd.rev >= 3);
>>  }
>>
>> +/* If necessary, callers must hold re-tuning */
>>  static int mmc_sleep(struct mmc_host *host)
>>  {
>>         struct mmc_command cmd = {0};
>> @@ -1631,6 +1633,7 @@ static int _mmc_suspend(struct mmc_host *host, bool is_suspend)
>>         int err = 0;
>>         unsigned int notify_type = is_suspend ? EXT_CSD_POWER_OFF_SHORT :
>>                                         EXT_CSD_POWER_OFF_LONG;
>> +       bool retune_release = false;
>>
>>         BUG_ON(!host);
>>         BUG_ON(!host->card);
>> @@ -1651,17 +1654,22 @@ static int _mmc_suspend(struct mmc_host *host, bool is_suspend)
>>                 goto out;
>>
>>         if (mmc_can_poweroff_notify(host->card) &&
>> -               ((host->caps2 & MMC_CAP2_FULL_PWR_CYCLE) || !is_suspend))
>> +               ((host->caps2 & MMC_CAP2_FULL_PWR_CYCLE) || !is_suspend)) {
>>                 err = mmc_poweroff_notify(host->card, notify_type);
>> -       else if (mmc_can_sleep(host->card))
>> +       } else if (mmc_can_sleep(host->card)) {
>> +               mmc_retune_hold(host);
>>                 err = mmc_sleep(host);
>> -       else if (!mmc_host_is_spi(host))
>> +       } else if (!mmc_host_is_spi(host)) {
>>                 err = mmc_deselect_cards(host);
>> +       }
>>
>>         if (!err) {
>>                 mmc_power_off(host);
>>                 mmc_card_set_suspended(host->card);
>>         }
>> +
>> +       if (retune_release)
>> +               mmc_retune_release(host);
>>  out:
>>         mmc_release_host(host);
>>         return err;
>> --
>> 1.9.1
>>
> 
> According to our previous discussions I have given this some more thinking.
> 
> I don't think we can allow to hold/disable re-tune in this path at
> all. That's because we are claiming the host here and the sleep
> command might then be the first command we invoke during the system PM
> sequence.
> 
> That means sdhci might have flagged need_retune, since it's been
> runtime PM suspended. And for those scenarios I guess we really need
> to do a re-tune prior sending the sleep command, right?

Yes, although that is how it works.

Previously I had two functions mmc_retune_hold() and mmc_retune_and_hold()
but after one of the revisions I found that only one was needed. I stuck
with the mmc_retune_hold() name because it doesn't necessarily cause a
re-tune, but only if the hold count was zero and a retune is needed.

> 
> Earlier I only had the re-tune timer in mind, which is why I was less
> restrictive and suggesting you to add hold/disable. Sorry about that.
> 
> Now, with the above in mind I believe you have similar issues with
> patch5 (mmc: core: Hold re-tuning during switch commands) and patch6
> (mmc: core: Hold re-tuning during erase commands). And that's because
> there are cases when the switch/erase commands are the first commands
> sent, after the sdhci host has been runtime PM suspended. I guess we
> need a way to make sure we don't hold re-tune for these cases.
> 
> An option to deal with that is to use a separate flag set by host
> drivers, though the mmc_needs_retune() API and let that one override
> another.
> 
> Forgive me for pushing you back and forth for how to do this, but it

Not a problem. Thanks for persevering.

> seems like we still have some outstanding issues to resolve.



--
To unsubscribe from this list: send the line "unsubscribe linux-mmc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Linux USB Devel]     [Linux Media]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux