On Wed, Mar 18, 2015 at 10:52:15AM +0100, Tomeu Vizoso wrote: > v6: * Added Acked-by and Reviewed-By tags > * Rebased on top of 4.0-rc1 > * Added patch that marks the WiFi card as powered during suspend > > v5: * Moved to use gpio-restart for reboots, had to make tegra_pmc_restart > a notification handler > > v4: * Added support for the system reset GPIO, for proper reboots > * Moved out changes to ASOC to their own series, as requested by Mark > Brown > * Added patch to reset the SOR, to make sure it's in a known state > * Changed nvidia,model property of the sound nodes to GoogleNyanBig > and GoogleNyanBlaze so they can be told apart in userspace > > v3: * Added bindings for the LTN140AT29 panel > * Removed the delay in pwrseq, as what was actually needed was to add > a dependency on the power supplies of the host > * Uses the pinmux for the Blaze as generated by tegra-pinmux-scripts > * Uses the pinmux for the Big as in the last patch from Simon Glass > > Hello, > > this series adds support for the Tegra-based HP Chromebook 14 (aka nyan > blaze), which is very similar to the Acer Chromebook 13 (aka nyan big). > Because they both include tegra124-nyan.dtsi, some improvements to Blaze > support have also benefitted the Big. I have tested that USB2, the panels, > HDMI, the trackpad, Wifi and sound work on both. > > The leaf DTs contain the whole pinmux configuration as generated by > tegra-pinmux-scripts. I chose to not put the common configuration in the > common dtsi so we can paste the output as is and be sure that the kernel > doesn't diverge from the canonical data. > > These patches are based on top of 4.0-rc1. > > http://cgit.collabora.com/git/user/tomeu/linux.git/log/?h=nyan-v6 > > Regards, > > Tomeu > > David Riley (1): > soc/tegra: pmc: move to using a restart handler > > Stéphane Marchesin (1): > drm/panel: add support for Samsung LTN140AT29 panel > > Tomeu Vizoso (10): > ARM: tegra: Change model of sound card in Nyan Big > ARM: tegra: Move out nyan-generic parts out from the nyan-big DT > ARM: tegra: Add DTS for the nyan-blaze board > ARM: tegra: Add node for trackpad in Nyan boards > ARM: tegra: Use pwrseq-simple for the wifi in Nyan > ARM: tegra: Use the generated pinmux data > ARM: tegra: Set spi-max-frequency property to flash node > drm/tegra: Reset the SOR on probe > ARM: tegra: Add gpio-restart node > ARM: tegra: The WiFi card is kept powered during suspend > > .../bindings/panel/samsung,ltn140at29-301.txt | 7 + > arch/arm/boot/dts/Makefile | 1 + > arch/arm/boot/dts/tegra124-nyan-big.dts | 2119 +++++++++++--------- > arch/arm/boot/dts/tegra124-nyan-blaze.dts | 1332 ++++++++++++ > arch/arm/boot/dts/tegra124-nyan.dtsi | 695 +++++++ > arch/arm/mach-tegra/tegra.c | 1 - > drivers/gpu/drm/panel/panel-simple.c | 26 + > drivers/gpu/drm/tegra/sor.c | 14 + > drivers/soc/tegra/pmc.c | 31 +- > 9 files changed, 3254 insertions(+), 972 deletions(-) > create mode 100644 Documentation/devicetree/bindings/panel/samsung,ltn140at29-301.txt > create mode 100644 arch/arm/boot/dts/tegra124-nyan-blaze.dts > create mode 100644 arch/arm/boot/dts/tegra124-nyan.dtsi Patches 1, 2, 4-8, 11 and 12 applied to the for-4.1/dt branch. Thanks, Thierry
Attachment:
pgpYPm6BWJebx.pgp
Description: PGP signature
