Hi
Here is V2 of some patches to enable a host controller to select
driver strength for eMMCs using HS200 or HS400. These are based
on top of the re-tuning series.
There can be some confusion over the term "driver strength".
SD calls it "drive strength" for the card but "driver type"
for the host. Whereas JEDEC calls it both "driver strength"
and "driver type". The values are the same for both SD
and eMMC:
Value Driver Type Relative strength
0 B x1 default and mandatory support
1 A x1.5
2 C x0.75
3 D x0.5
Except eMMC also defines value 4:
Value Driver Type Relative strength
4 x1.2
Changes in V2:
mmc: core: Add function to read driver-strength device property
Dropped because there are still questions over how to use
device properties.
mmc: sdhci-pci: Add support for drive strength selection for SPT
Amended to reflect the change above.
Adrian Hunter (11):
mmc: core: Reset driver type to default
mmc: core: Allow card drive strength to be different to host
mmc: core: Simplify card drive strength mask
mmc: core: Add 'card' to drive strength selection callback
mmc: core: Factor out common code in drive strength selection
mmc: core: Record card drive strength
mmc: mmc: Read card's valid driver strength mask
mmc: mmc: Add driver strength selection
mmc: sdhci: Add a callback to select drive strength
mmc: sdhci-pci: Add support for drive strength selection for SPT
mmc: sdhci-pci: Enable HS400 for some Intel host controllers
drivers/mmc/core/core.c | 39 ++++++++++++++++++
drivers/mmc/core/core.h | 2 +
drivers/mmc/core/mmc.c | 46 +++++++++++++++++----
drivers/mmc/core/sd.c | 69 ++++++++-----------------------
drivers/mmc/core/sdio.c | 77 +++++++++++-----------------------
drivers/mmc/host/sdhci-pci-data.c | 3 ++
drivers/mmc/host/sdhci-pci.c | 84 ++++++++++++++++++++++++++++++++++++++
drivers/mmc/host/sdhci-pci.h | 4 ++
drivers/mmc/host/sdhci.c | 13 ++++++
drivers/mmc/host/sdhci.h | 4 ++
include/linux/mmc/card.h | 2 +
include/linux/mmc/host.h | 4 +-
include/linux/mmc/mmc.h | 4 ++
include/linux/mmc/sdhci-pci-data.h | 2 +
14 files changed, 240 insertions(+), 113 deletions(-)
Regards
Adrian
--
To unsubscribe from this list: send the line "unsubscribe linux-mmc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
