On 29 January 2015 at 12:36, Gregory CLEMENT <gregory.clement@xxxxxxxxxxxxxxxxxx> wrote: > Hi, > > this series brings fixes and improvements for the SDHCI controller of > the Armada 38x SoCs. > > The changes for this forth version was done on the 1st and 4th > patches, see the changelog for the details. > > The first two patches are fixes and should be also applied on the > stable branch (I added stable in copy for this). > > The first one removes the SDR50 and DDR50 mode timing from the > capabilities of the controller because the current implementation > doesn't support it. > > The second one fix controller's caps according to the limitation of > the hardware. > > The third one extends the Device Tree binding of the Armada 38x. It > allows using the SDIO3 configuration register. > > The forth patch adds the support of this new register in the > driver. Thanks to this one, specific clock adjustments can be done in > order to support the SDR50 and DDR50 modes timing. > > The fifth patch is device tree clean-up. > > The sixth patch update the SDHCI node on Armada 38x in order to use > the new register and then to be able to support the SDR50 and DDR50 > modes timing. > > Finally, the seventh patch add the description of SDHCI for the Armada > 388 RD board which was missing. > > Patches 1 to 4 should be merged through the mmc tree and patches 5 to > 7 should be merged through mvebu and then arm-soc. > > Patch 4 depend on patch 2. > Patch 2 depend on patch 1. > And patch 1 depend on commit aa8165f91442 "mmc: sdhci-pxav3: do the > mbus window configuration after enabling clocks" which have been > merged. > > But as all this patch should be merged through the same tree it would > not be a problem > > The patches 5 to 7 depend on the patches already merged in mvebu. > > As they are fixes, patches 1 and 2 should be merged in 3.18-rc or at > least in 3.19 and then they will be part of 3.18.1. For the other > patches it would be nice if they could be part of 3.19. > > Thanks, > > Gregory > > Changelog: > > v3 -> v4: > - Merge the 3 dev_wanr message in a single one > - Remove err_quirks label > > v2 -> v3: > - Use of_property_read_bool() instead of of_get_property > - Brace the else case according to the Documentation/CodingStyle > - Move the setting of MMC_CAP_1_8V_DDR before the armada_38x_quirks > calls > > v1 -> v2: > - Put back Marcin as author of patch 2 and 3 > - Removed MMC_CAP_1_8V_DDR in the probe function > > Gregory CLEMENT (5): > mmc: sdhci-pxav3: Fix SDR50 and DDR50 capabilities for the Armada 38x > flavor > mmc: sdhci-pxav3: Extend binding with SDIO3 conf reg for the Armada > 38x > ARM: mvebu: Use macros for interrupt flags on Armada 38x sdhci node > ARM: mvebu: Update the SDHCI node on Armada 38x > ARM: mvebu: Add Device Tree description of SDHCI for Armada 388 RD > > > Gregory CLEMENT (5): > mmc: sdhci-pxav3: Fix SDR50 and DDR50 capabilities for the Armada 38x > flavor > mmc: sdhci-pxav3: Extend binding with SDIO3 conf reg for the Armada > 38x > ARM: mvebu: Use macros for interrupt flags on Armada 38x sdhci node > ARM: mvebu: Update the SDHCI node on Armada 38x > ARM: mvebu: Add Device Tree description of SDHCI for Armada 388 RD > > Marcin Wojtas (2): > mmc: sdhci-pxav3: Fix Armada 38x controller's caps according to > erratum ERR-7878951 > mmc: sdhci-pxav3: Modify clock settings for the SDR50 and DDR50 modes > > .../devicetree/bindings/mmc/sdhci-pxa.txt | 15 ++-- > arch/arm/boot/dts/armada-388-rd.dts | 10 +++ > arch/arm/boot/dts/armada-38x.dtsi | 7 +- > drivers/mmc/host/sdhci-pxav3.c | 83 +++++++++++++++++++++- > 4 files changed, 106 insertions(+), 9 deletions(-) > > -- > 2.1.0 > Thanks! Applied patch 1 -> 4 for next. Kind regards Uffe -- To unsubscribe from this list: send the line "unsubscribe linux-mmc" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
