From: Seungwon Jeon <tgih.jun@xxxxxxxxxxx>
HS400 timing value set is added for SMDK5420, peach-pit and
exynos5800 peach-pi.
And GPIO line for RCLK should be pull-down state.
Signed-off-by: Seungwon Jeon <tgih.jun@xxxxxxxxxxx>
Signed-off-by: Alim Akhtar <alim.akhtar@xxxxxxxxxxx>
---
arch/arm/boot/dts/exynos5420-peach-pit.dts | 5 ++++-
arch/arm/boot/dts/exynos5420-pinctrl.dtsi | 7 +++++++
arch/arm/boot/dts/exynos5420-smdk5420.dts | 5 ++++-
arch/arm/boot/dts/exynos5800-peach-pi.dts | 5 ++++-
4 files changed, 19 insertions(+), 3 deletions(-)
diff --git a/arch/arm/boot/dts/exynos5420-peach-pit.dts b/arch/arm/boot/dts/exynos5420-peach-pit.dts
index e9f5a6c..151ae7d 100644
--- a/arch/arm/boot/dts/exynos5420-peach-pit.dts
+++ b/arch/arm/boot/dts/exynos5420-peach-pit.dts
@@ -568,8 +568,11 @@
clock-frequency = <400000000>;
samsung,dw-mshc-sdr-timing = <0 4 3>;
samsung,dw-mshc-ddr-timing = <0 2 3>;
+ samsung,dw-mshc-hs200-timing = <0 2 3>;
+ samsung,dw-mshc-hs400-timing = <0 2 1>;
+ read-strobe-delay = <90>;
pinctrl-names = "default";
- pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus4 &sd0_bus8>;
+ pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus4 &sd0_bus8 &sd0_rclk>;
bus-width = <8>;
};
diff --git a/arch/arm/boot/dts/exynos5420-pinctrl.dtsi b/arch/arm/boot/dts/exynos5420-pinctrl.dtsi
index ba686e4..dd85fe2 100644
--- a/arch/arm/boot/dts/exynos5420-pinctrl.dtsi
+++ b/arch/arm/boot/dts/exynos5420-pinctrl.dtsi
@@ -194,6 +194,13 @@
samsung,pin-drv = <3>;
};
+ sd0_rclk: sd0-rclk {
+ samsung,pins = "gpc0-7";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <1>;
+ samsung,pin-drv = <3>;
+ };
+
sd1_clk: sd1-clk {
samsung,pins = "gpc1-0";
samsung,pin-function = <2>;
diff --git a/arch/arm/boot/dts/exynos5420-smdk5420.dts b/arch/arm/boot/dts/exynos5420-smdk5420.dts
index 140ea54..685e2a4 100644
--- a/arch/arm/boot/dts/exynos5420-smdk5420.dts
+++ b/arch/arm/boot/dts/exynos5420-smdk5420.dts
@@ -79,8 +79,11 @@
card-detect-delay = <200>;
samsung,dw-mshc-sdr-timing = <0 4 3>;
samsung,dw-mshc-ddr-timing = <0 2 3>;
+ samsung,dw-mshc-hs200-timing = <0 2 3>;
+ samsung,dw-mshc-hs400-timing = <0 2 1>;
+ read-strobe-delay = <90>;
pinctrl-names = "default";
- pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus4 &sd0_bus8>;
+ pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus4 &sd0_bus8 &sd0_rclk>;
bus-width = <8>;
cap-mmc-highspeed;
};
diff --git a/arch/arm/boot/dts/exynos5800-peach-pi.dts b/arch/arm/boot/dts/exynos5800-peach-pi.dts
index 9a4875b..28d4109 100644
--- a/arch/arm/boot/dts/exynos5800-peach-pi.dts
+++ b/arch/arm/boot/dts/exynos5800-peach-pi.dts
@@ -556,8 +556,11 @@
clock-frequency = <400000000>;
samsung,dw-mshc-sdr-timing = <0 4 3>;
samsung,dw-mshc-ddr-timing = <0 2 3>;
+ samsung,dw-mshc-hs200-timing = <0 2 3>;
+ samsung,dw-mshc-hs400-timing = <0 2 1>;
+ read-strobe-delay = <90>;
pinctrl-names = "default";
- pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus4 &sd0_bus8>;
+ pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus4 &sd0_bus8 &sd0_rclk>;
bus-width = <8>;
};
--
1.7.9.5
--
To unsubscribe from this list: send the line "unsubscribe linux-mmc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
