From: Seungwon Jeon <tgih.jun@xxxxxxxxxxx>
Implements HS400 support for exynos host driver.
And this patch includes some updates as new mode is added.
Signed-off-by: Seungwon Jeon <tgih.jun@xxxxxxxxxxx>
Signed-off-by: Alim Akhtar <alim.akhtar@xxxxxxxxxxx>
---
.../devicetree/bindings/mmc/exynos-dw-mshc.txt | 6 +
drivers/mmc/host/dw_mmc-exynos.c | 177 +++++++++++++++-----
drivers/mmc/host/dw_mmc-exynos.h | 17 +-
drivers/mmc/host/dw_mmc.c | 16 +-
drivers/mmc/host/dw_mmc.h | 2 +
5 files changed, 178 insertions(+), 40 deletions(-)
diff --git a/Documentation/devicetree/bindings/mmc/exynos-dw-mshc.txt b/Documentation/devicetree/bindings/mmc/exynos-dw-mshc.txt
index 06455de..be30c94 100644
--- a/Documentation/devicetree/bindings/mmc/exynos-dw-mshc.txt
+++ b/Documentation/devicetree/bindings/mmc/exynos-dw-mshc.txt
@@ -34,6 +34,7 @@ Required Properties:
valid values.
* samsung,dw-mshc-hs200-timing: Similar with dw-mshc-sdr-timing.
+* samsung,dw-mshc-hs400-timing: Similar with dw-mshc-ddr-timing.
Notes for the sdr-timing and ddr-timing values:
@@ -51,6 +52,9 @@ Required Properties:
- if CIU clock divider value is 0 (that is divide by 1), both tx and rx
phase shift clocks should be 0.
+* read-strobe-delay: RCLK (Data strobe) delay to control HS400 mode
+ (Latency value for delay line in Read path)
+
Required properties for a slot (Deprecated - Recommend to use one slot per host):
* gpios: specifies a list of gpios used for command, clock and data bus. The
@@ -83,5 +87,7 @@ Example:
samsung,dw-mshc-sdr-timing = <2 3 3>;
samsung,dw-mshc-ddr-timing = <1 2 3>;
samsung,dw-mshc-hs200-timing = <0 2 3>;
+ samsung,dw-mshc-hs400-timing = <0 2 1>;
+ read-strobe-delay = <90>;
bus-width = <8>;
};
diff --git a/drivers/mmc/host/dw_mmc-exynos.c b/drivers/mmc/host/dw_mmc-exynos.c
index be6530e..d37a631 100644
--- a/drivers/mmc/host/dw_mmc-exynos.c
+++ b/drivers/mmc/host/dw_mmc-exynos.c
@@ -41,7 +41,12 @@ struct dw_mci_exynos_priv_data {
u32 sdr_timing;
u32 ddr_timing;
u32 hs200_timing;
+ u32 hs400_timing;
+ u32 tuned_sample;
u32 cur_speed;
+ u32 dqs_delay;
+ u32 saved_dqs_en;
+ u32 saved_strobe_ctrl;
};
static struct dw_mci_exynos_compatible {
@@ -101,6 +106,16 @@ static int dw_mci_exynos_priv_init(struct dw_mci *host)
SDMMC_MPSCTRL_NON_SECURE_WRITE_BIT);
}
+ if (priv->ctrl_type >= DW_MCI_TYPE_EXYNOS5420) {
+ priv->saved_strobe_ctrl = mci_readl(host, HS400_DLINE_CTRL);
+ priv->saved_dqs_en = mci_readl(host, HS400_DQS_EN);
+ priv->saved_dqs_en |= AXI_NON_BLOCKING_WR;
+ mci_writel(host, HS400_DQS_EN, priv->saved_dqs_en);
+ if (!priv->dqs_delay)
+ priv->dqs_delay =
+ DQS_CTRL_GET_RD_DELAY(priv->saved_strobe_ctrl);
+ }
+
priv->ciu_div = dw_mci_exynos_get_ciu_div(host);
return 0;
@@ -115,6 +130,25 @@ static int dw_mci_exynos_setup_clock(struct dw_mci *host)
return 0;
}
+static void dw_mci_exynos_set_clksel_timing(struct dw_mci *host, u32 timing)
+{
+ struct dw_mci_exynos_priv_data *priv = host->priv;
+ u32 clksel;
+
+ if (priv->ctrl_type == DW_MCI_TYPE_EXYNOS7 ||
+ priv->ctrl_type == DW_MCI_TYPE_EXYNOS7_SMU)
+ clksel = mci_readl(host, CLKSEL64);
+ else
+ clksel = mci_readl(host, CLKSEL);
+
+ clksel = (clksel & ~SDMMC_CLKSEL_TIMING_MASK) | timing;
+ if (priv->ctrl_type == DW_MCI_TYPE_EXYNOS7 ||
+ priv->ctrl_type == DW_MCI_TYPE_EXYNOS7_SMU)
+ mci_writel(host, CLKSEL64, clksel);
+ else
+ mci_writel(host, CLKSEL, clksel);
+}
+
#ifdef CONFIG_PM_SLEEP
static int dw_mci_exynos_suspend(struct device *dev)
{
@@ -190,35 +224,37 @@ static void dw_mci_exynos_prepare_command(struct dw_mci *host, u32 *cmdr)
}
}
-static void dw_mci_exynos_set_ios(struct dw_mci *host, struct mmc_ios *ios)
+static void dw_mci_exynos_config_hs400(struct dw_mci *host, u32 timing)
{
struct dw_mci_exynos_priv_data *priv = host->priv;
- unsigned int wanted = ios->clock;
- unsigned long actual;
+ u32 dqs, strobe;
- if (ios->timing == MMC_TIMING_MMC_HS200) {
- if (priv->ctrl_type == DW_MCI_TYPE_EXYNOS7 ||
- priv->ctrl_type == DW_MCI_TYPE_EXYNOS7_SMU)
- mci_writel(host, CLKSEL64, priv->hs200_timing);
- else
- mci_writel(host, CLKSEL, priv->hs200_timing);
- } else if (ios->timing == MMC_TIMING_MMC_DDR52) {
- if (priv->ctrl_type == DW_MCI_TYPE_EXYNOS7 ||
- priv->ctrl_type == DW_MCI_TYPE_EXYNOS7_SMU)
- mci_writel(host, CLKSEL64, priv->ddr_timing);
- else
- mci_writel(host, CLKSEL, priv->ddr_timing);
- /* Should be double rate for DDR mode */
- if (ios->bus_width == MMC_BUS_WIDTH_8)
- wanted <<= 1;
+ /*
+ * Exynos5420 and above controller supports HS400 mode
+ */
+ if (priv->ctrl_type < DW_MCI_TYPE_EXYNOS5420)
+ return;
+
+ dqs = priv->saved_dqs_en;
+ strobe = priv->saved_strobe_ctrl;
+
+ if (timing == MMC_TIMING_MMC_HS400) {
+ dqs |= DATA_STROBE_EN;
+ strobe = DQS_CTRL_RD_DELAY(strobe, priv->dqs_delay);
} else {
- if (priv->ctrl_type == DW_MCI_TYPE_EXYNOS7 ||
- priv->ctrl_type == DW_MCI_TYPE_EXYNOS7_SMU)
- mci_writel(host, CLKSEL64, priv->sdr_timing);
- else
- mci_writel(host, CLKSEL, priv->sdr_timing);
+ dqs &= ~DATA_STROBE_EN;
}
+ mci_writel(host, HS400_DQS_EN, dqs);
+ mci_writel(host, HS400_DLINE_CTRL, strobe);
+}
+
+static void dw_mci_exynos_adjust_clock(struct dw_mci *host, unsigned int wanted)
+{
+ struct dw_mci_exynos_priv_data *priv = host->priv;
+ unsigned long actual;
+ u8 div;
+ int ret;
/*
* Don't care if wanted clock is zero or
* ciu clock is unavailable
@@ -230,18 +266,55 @@ static void dw_mci_exynos_set_ios(struct dw_mci *host, struct mmc_ios *ios)
if (wanted < EXYNOS_CCLKIN_MIN)
wanted = EXYNOS_CCLKIN_MIN;
- if (wanted != priv->cur_speed) {
- u8 div = dw_mci_exynos_get_ciu_div(host);
- int ret = clk_set_rate(host->ciu_clk, wanted * div);
- if (ret)
- dev_warn(host->dev,
- "failed to set clk-rate %u error: %d\n",
- wanted * div, ret);
- actual = clk_get_rate(host->ciu_clk);
- host->bus_hz = actual / div;
- priv->cur_speed = wanted;
- host->current_speed = 0;
+ if (wanted == priv->cur_speed)
+ return;
+
+ div = dw_mci_exynos_get_ciu_div(host);
+ ret = clk_set_rate(host->ciu_clk, wanted * div);
+ if (ret)
+ dev_warn(host->dev,
+ "failed to set clk-rate %u error: %d\n",
+ wanted * div, ret);
+ actual = clk_get_rate(host->ciu_clk);
+ host->bus_hz = actual / div;
+ priv->cur_speed = wanted;
+ host->current_speed = 0;
+}
+
+static void dw_mci_exynos_set_ios(struct dw_mci *host, struct mmc_ios *ios)
+{
+ struct dw_mci_exynos_priv_data *priv = host->priv;
+ unsigned int wanted = ios->clock;
+ u32 timing = ios->timing, clksel;
+
+ switch (timing) {
+ case MMC_TIMING_MMC_HS400:
+ /* Update tuned sample timing */
+ clksel = SDMMC_CLKSEL_UP_SAMPLE(
+ priv->hs400_timing, priv->tuned_sample);
+ wanted <<= 1;
+ break;
+ case MMC_TIMING_MMC_HS200:
+ clksel = priv->hs200_timing;
+ break;
+ case MMC_TIMING_MMC_DDR52:
+ clksel = priv->ddr_timing;
+ /* Should be double rate for DDR mode */
+ if (ios->bus_width == MMC_BUS_WIDTH_8)
+ wanted <<= 1;
+ break;
+ default:
+ clksel = priv->sdr_timing;
}
+
+ /* Set clock timing for the requested speed mode*/
+ dw_mci_exynos_set_clksel_timing(host, clksel);
+
+ /* Configure setting for HS400 */
+ dw_mci_exynos_config_hs400(host, timing);
+
+ /* Configure clock rate */
+ dw_mci_exynos_adjust_clock(host, wanted);
}
static int dw_mci_exynos_dt_populate_timing(struct dw_mci *host,
@@ -294,6 +367,14 @@ static int dw_mci_exynos_parse_dt(struct dw_mci *host)
dw_mci_exynos_dt_populate_timing(host, priv->ctrl_type,
"samsung,dw-mshc-hs200-timing", &priv->hs200_timing);
+
+ ret = dw_mci_exynos_dt_populate_timing(host, priv->ctrl_type,
+ "samsung,dw-mshc-hs400-timing", &priv->hs400_timing);
+ if (!ret && of_property_read_u32(np,
+ "read-strobe-delay", &priv->dqs_delay))
+ dev_info(host->dev,
+ "read-strobe-delay is not found, assuming usage of default value\n");
+
host->priv = priv;
return 0;
@@ -320,7 +401,9 @@ static inline void dw_mci_exynos_set_clksmpl(struct dw_mci *host, u8 sample)
clksel = mci_readl(host, CLKSEL64);
else
clksel = mci_readl(host, CLKSEL);
- clksel = (clksel & ~0x7) | SDMMC_CLKSEL_CCLK_SAMPLE(sample);
+
+ clksel = SDMMC_CLKSEL_UP_SAMPLE(clksel, sample);
+
if (priv->ctrl_type == DW_MCI_TYPE_EXYNOS7 ||
priv->ctrl_type == DW_MCI_TYPE_EXYNOS7_SMU)
mci_writel(host, CLKSEL64, clksel);
@@ -339,13 +422,16 @@ static inline u8 dw_mci_exynos_move_next_clksmpl(struct dw_mci *host)
clksel = mci_readl(host, CLKSEL64);
else
clksel = mci_readl(host, CLKSEL);
+
sample = (clksel + 1) & 0x7;
- clksel = (clksel & ~0x7) | sample;
+ clksel = SDMMC_CLKSEL_UP_SAMPLE(clksel, sample);
+
if (priv->ctrl_type == DW_MCI_TYPE_EXYNOS7 ||
priv->ctrl_type == DW_MCI_TYPE_EXYNOS7_SMU)
mci_writel(host, CLKSEL64, clksel);
else
mci_writel(host, CLKSEL, clksel);
+
return sample;
}
@@ -378,6 +464,7 @@ out:
static int dw_mci_exynos_execute_tuning(struct dw_mci_slot *slot)
{
struct dw_mci *host = slot->host;
+ struct dw_mci_exynos_priv_data *priv = host->priv;
struct mmc_host *mmc = slot->mmc;
u8 start_smpl, smpl, candiates = 0;
s8 found = -1;
@@ -395,14 +482,27 @@ static int dw_mci_exynos_execute_tuning(struct dw_mci_slot *slot)
} while (start_smpl != smpl);
found = dw_mci_exynos_get_best_clksmpl(candiates);
- if (found >= 0)
+ if (found >= 0) {
dw_mci_exynos_set_clksmpl(host, found);
- else
+ priv->tuned_sample = found;
+ } else {
ret = -EIO;
+ }
return ret;
}
+int dw_mci_exynos_prepare_hs400_tuning(struct dw_mci *host,
+ struct mmc_ios *ios)
+{
+ struct dw_mci_exynos_priv_data *priv = host->priv;
+
+ dw_mci_exynos_set_clksel_timing(host, priv->hs400_timing);
+ dw_mci_exynos_adjust_clock(host, (ios->clock) << 1);
+
+ return 0;
+}
+
/* Common capabilities of Exynos4/Exynos5 SoC */
static unsigned long exynos_dwmmc_caps[4] = {
MMC_CAP_1_8V_DDR | MMC_CAP_8_BIT_DATA | MMC_CAP_CMD23,
@@ -419,6 +519,7 @@ static const struct dw_mci_drv_data exynos_drv_data = {
.set_ios = dw_mci_exynos_set_ios,
.parse_dt = dw_mci_exynos_parse_dt,
.execute_tuning = dw_mci_exynos_execute_tuning,
+ .prepare_hs400_tuning = dw_mci_exynos_prepare_hs400_tuning,
};
static const struct of_device_id dw_mci_exynos_match[] = {
diff --git a/drivers/mmc/host/dw_mmc-exynos.h b/drivers/mmc/host/dw_mmc-exynos.h
index c04ecef..e7faffe 100644
--- a/drivers/mmc/host/dw_mmc-exynos.h
+++ b/drivers/mmc/host/dw_mmc-exynos.h
@@ -12,21 +12,36 @@
#ifndef _DW_MMC_EXYNOS_H_
#define _DW_MMC_EXYNOS_H_
-/* Extended Register's Offset */
#define SDMMC_CLKSEL 0x09C
#define SDMMC_CLKSEL64 0x0A8
+/* Extended Register's Offset */
+#define SDMMC_HS400_DQS_EN 0x180
+#define SDMMC_HS400_ASYNC_FIFO_CTRL 0x184
+#define SDMMC_HS400_DLINE_CTRL 0x188
+
/* CLKSEL register defines */
#define SDMMC_CLKSEL_CCLK_SAMPLE(x) (((x) & 7) << 0)
#define SDMMC_CLKSEL_CCLK_DRIVE(x) (((x) & 7) << 16)
#define SDMMC_CLKSEL_CCLK_DIVIDER(x) (((x) & 7) << 24)
#define SDMMC_CLKSEL_GET_DRV_WD3(x) (((x) >> 16) & 0x7)
#define SDMMC_CLKSEL_GET_DIV(x) (((x) >> 24) & 0x7)
+#define SDMMC_CLKSEL_UP_SAMPLE(x, y) (((x) & ~SDMMC_CLKSEL_CCLK_SAMPLE(7)) |\
+ SDMMC_CLKSEL_CCLK_SAMPLE(y))
#define SDMMC_CLKSEL_TIMING(x, y, z) (SDMMC_CLKSEL_CCLK_SAMPLE(x) | \
SDMMC_CLKSEL_CCLK_DRIVE(y) | \
SDMMC_CLKSEL_CCLK_DIVIDER(z))
+#define SDMMC_CLKSEL_TIMING_MASK SDMMC_CLKSEL_TIMING(0x7, 0x7, 0x7)
#define SDMMC_CLKSEL_WAKEUP_INT BIT(11)
+/* HS400 control defines */
+#define DATA_STROBE_EN BIT(0)
+#define AXI_NON_BLOCKING_WR BIT(7)
+
+/* Delay Line Control defines */
+#define DQS_CTRL_RD_DELAY(x, y) (((x) & ~0x3FF) | ((y) & 0x3FF))
+#define DQS_CTRL_GET_RD_DELAY(x) ((x) & 0x3FF)
+
/* Protector Register */
#define SDMMC_EMMCP_BASE 0x1000
#define SDMMC_MPSECURITY (SDMMC_EMMCP_BASE + 0x0010)
diff --git a/drivers/mmc/host/dw_mmc.c b/drivers/mmc/host/dw_mmc.c
index 2e8abc8..43a3a5b 100644
--- a/drivers/mmc/host/dw_mmc.c
+++ b/drivers/mmc/host/dw_mmc.c
@@ -1084,7 +1084,8 @@ static void dw_mci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
regs = mci_readl(slot->host, UHS_REG);
/* DDR mode set */
- if (ios->timing == MMC_TIMING_MMC_DDR52)
+ if (ios->timing == MMC_TIMING_MMC_DDR52 ||
+ ios->timing == MMC_TIMING_MMC_HS400)
regs |= ((0x1 << slot->id) << 16);
else
regs &= ~((0x1 << slot->id) << 16);
@@ -1321,6 +1322,18 @@ static int dw_mci_execute_tuning(struct mmc_host *mmc, u32 opcode)
return err;
}
+int dw_mci_prepare_hs400_tuning(struct mmc_host *mmc, struct mmc_ios *ios)
+{
+ struct dw_mci_slot *slot = mmc_priv(mmc);
+ struct dw_mci *host = slot->host;
+ const struct dw_mci_drv_data *drv_data = host->drv_data;
+
+ if (drv_data && drv_data->prepare_hs400_tuning)
+ return drv_data->prepare_hs400_tuning(host, ios);
+
+ return 0;
+}
+
static const struct mmc_host_ops dw_mci_ops = {
.request = dw_mci_request,
.pre_req = dw_mci_pre_req,
@@ -1333,6 +1346,7 @@ static const struct mmc_host_ops dw_mci_ops = {
.card_busy = dw_mci_card_busy,
.start_signal_voltage_switch = dw_mci_switch_voltage,
.init_card = dw_mci_init_card,
+ .prepare_hs400_tuning = dw_mci_prepare_hs400_tuning,
};
static void dw_mci_request_end(struct dw_mci *host, struct mmc_request *mrq)
diff --git a/drivers/mmc/host/dw_mmc.h b/drivers/mmc/host/dw_mmc.h
index 18c4afe..d239867 100644
--- a/drivers/mmc/host/dw_mmc.h
+++ b/drivers/mmc/host/dw_mmc.h
@@ -271,5 +271,7 @@ struct dw_mci_drv_data {
void (*set_ios)(struct dw_mci *host, struct mmc_ios *ios);
int (*parse_dt)(struct dw_mci *host);
int (*execute_tuning)(struct dw_mci_slot *slot);
+ int (*prepare_hs400_tuning)(struct dw_mci *host,
+ struct mmc_ios *ios);
};
#endif /* _DW_MMC_H_ */
--
1.7.9.5
--
To unsubscribe from this list: send the line "unsubscribe linux-mmc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
