Alex, On Thu, Dec 18, 2014 at 3:01 PM, Alexandru M Stan <amstan@xxxxxxxxxxxx> wrote: > Add ciu_drv, ciu_sample clocks and default-sample-phase. This will later be used > by tuning code. > > We do not touch ciu_drive (and by extension define default-drive-phase). Drive > phase is mostly used to define minimum hold times, while one could write some > code to determine what phase meets the minimum hold time (ex 10 degrees) this > will not work with the current clock phase framework (which floors angles, so > we'll get 0 deg, and there's no way to know what resolution the floors happen > at). We assume that the default drive angles set by the hardware are good enough. > > Signed-off-by: Alexandru M Stan <amstan@xxxxxxxxxxxx> > Suggested-by: Heiko Stuebner <heiko@xxxxxxxxx> > Suggested-by: Doug Anderson <dianders@xxxxxxxxxxxx> > --- > Documentation/devicetree/bindings/mmc/synopsys-dw-mshc.txt | 14 ++++++++++---- > 1 file changed, 10 insertions(+), 4 deletions(-) Reviewed-by: Doug Anderson <dianders@xxxxxxxxxxxx> -- To unsubscribe from this list: send the line "unsubscribe linux-mmc" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
