On 14 October 2014 18:39, Doug Anderson <dianders@xxxxxxxxxxxx> wrote: > The "set_ios" function is called with a clock of 0 when the clock is > turning off. There's no reason to go through all the extra Rockchip > logic (whose goal is to make sure DIV is 0 or 1) in that case. The > Rockchip logic happened to work because the CCF will pick the lowest > possible rate when you ask it for a clock of 0, but it's silly to go > through all the remuxing and adjusting for no reason. > > Signed-off-by: Doug Anderson <dianders@xxxxxxxxxxxx> Thanks! Applied for next! Kind regards Uffe > --- > drivers/mmc/host/dw_mmc-rockchip.c | 3 +++ > 1 file changed, 3 insertions(+) > > diff --git a/drivers/mmc/host/dw_mmc-rockchip.c b/drivers/mmc/host/dw_mmc-rockchip.c > index f0c2cb1..bbb4ec3 100644 > --- a/drivers/mmc/host/dw_mmc-rockchip.c > +++ b/drivers/mmc/host/dw_mmc-rockchip.c > @@ -37,6 +37,9 @@ static void dw_mci_rk3288_set_ios(struct dw_mci *host, struct mmc_ios *ios) > unsigned int cclkin; > u32 bus_hz; > > + if (ios->clock == 0) > + return; > + > /* > * cclkin: source clock of mmc controller > * bus_hz: card interface clock generated by CLKGEN > -- > 2.1.0.rc2.206.gedb03e5 > -- To unsubscribe from this list: send the line "unsubscribe linux-mmc" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
