The ADMA2 descriptor table size was being calculated incorrectly Fix it. Note that it has been wrong for a long time and likely has not caused any problems because of a combination of 1) not needing alignment descriptors for block operations 2) more memory being allocated than was requested 3) the use of SDHCI_QUIRK_NO_ENDATTR_IN_NOPDESC which does not use an extra descriptor for the end marker. Signed-off-by: Adrian Hunter <adrian.hunter@xxxxxxxxx> --- drivers/mmc/host/sdhci.c | 8 +++++++- 1 file changed, 7 insertions(+), 1 deletion(-) diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c index ada1a3e..c409e87 100644 --- a/drivers/mmc/host/sdhci.c +++ b/drivers/mmc/host/sdhci.c @@ -44,7 +44,13 @@ #define MAX_TUNING_LOOP 40 -#define ADMA_SIZE ((128 * 2 + 1) * 4) +/* + * The ADMA2 descriptor table size is calculated as the maximum number of + * segments (128), times 2 to allow for an alignment descriptor for each + * segment, plus 1 for a nop end descriptor, all multipled by the 32-bit + * descriptor size (8). + */ +#define ADMA_SIZE ((128 * 2 + 1) * 8) static unsigned int debug_quirks = 0; static unsigned int debug_quirks2; -- 1.9.1 -- To unsubscribe from this list: send the line "unsubscribe linux-mmc" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
