Re: [PATCH v2] mmc: dw_mmc: Reset DMA before enabling IDMAC

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Fri, Oct 17, 2014 at 1:26 AM, Jaehoon Chung <jh80.chung@xxxxxxxxxxx> wrote:
> Hi, Sonny.
>
> On 10/17/2014 01:58 AM, Sonny Rao wrote:
>> We've already got a reset of DMA after it's done.  Add one before we
>> start DMA too.  This fixes a data corruption on Rockchip SoCs which
>> will get bad data when doing a DMA transfer after doing a PIO transfer.
>>
>> We tested this on an Exynos 5800 with HS200 and didn't notice any
>> difference in sequential read throughput.
>
> Didn't affect the write throughput?

Write is usually much slower than read, but I went ahead and re-tested
and saw no difference on writes.

> I tested this on exynos3/4 with DDR50 and HS200.
>
> Acked-by: Jaehoon Chung <jh80.chung@xxxxxxxxxxx>
> Tested-by: Jaehoon Chung <jh80.chung@xxxxxxxxxxx>
>
>>
>> Signed-off-by: Sonny Rao <sonnyrao@xxxxxxxxxxxx>
>> Signed-off-by: Doug Anderson <dianders@xxxxxxxxxxxx>
>> Tested-by: Doug Anderson <dianders@xxxxxxxxxxxx>
>> ---
>>  drivers/mmc/host/dw_mmc.c | 5 +++++
>>  1 file changed, 5 insertions(+)
>>
>> diff --git a/drivers/mmc/host/dw_mmc.c b/drivers/mmc/host/dw_mmc.c
>> index 69f0cc6..ca67f69 100644
>> --- a/drivers/mmc/host/dw_mmc.c
>> +++ b/drivers/mmc/host/dw_mmc.c
>> @@ -83,6 +83,7 @@ struct idmac_desc {
>>  #endif /* CONFIG_MMC_DW_IDMAC */
>>
>>  static bool dw_mci_reset(struct dw_mci *host);
>> +static bool dw_mci_ctrl_reset(struct dw_mci *host, u32 reset);
>>
>>  #if defined(CONFIG_DEBUG_FS)
>>  static int dw_mci_req_show(struct seq_file *s, void *v)
>> @@ -448,6 +449,10 @@ static void dw_mci_idmac_start_dma(struct dw_mci *host, unsigned int sg_len)
>>
>>       dw_mci_translate_sglist(host, host->data, sg_len);
>>
>> +     /* Make sure to reset DMA in case we did PIO before this */
>> +     dw_mci_ctrl_reset(host, SDMMC_CTRL_DMA_RESET);
>> +     dw_mci_idmac_reset(host);
>> +
>>       /* Select IDMAC interface */
>>       temp = mci_readl(host, CTRL);
>>       temp |= SDMMC_CTRL_USE_IDMAC;
>>
>
--
To unsubscribe from this list: send the line "unsubscribe linux-mmc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Linux USB Devel]     [Linux Media]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux